BlackBox LMC5023C-R3 High-Density Media Converter System II, Layer 1 module, 100BASE-TX to 100BASE-FX, multimode 1300-nm, SC 2 km
|
375,36 EUR |
|||||||||||
|
( 446,68 EUR incl. VAT ) ≈ £314.18 | ≈ $412.52 plus delivery charges: 55,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 96 workdaysinfo_outline | |||||||||||
| In Stock: >10 pieces | |||||||||||
| Lieske Part No.: | 475091 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | LMC5023C-R3 | ||||||||||
| Weight: | 0.17 kg | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for BlackBox LMC5023C-R3:
Applications
This module is suitable for networks requiring a connection between copper and fiber optic segments, for example in building cabling, when connecting outdoor stations, or in industrial environments where cable installation covers long distances. The multimode fiber optic cable with a 1300 nm wavelength enables transmission over up to 2 km, which is sufficient for many enterprise networks. The use of SC connectors is standard in many network infrastructures and ensures a secure mechanical connection.
Functions and Features in Detail
The module converts signals from 100BASE-TX (copper, RJ45) to 100BASE-FX (fiber optic, SC). The 100BASE-TX interface supports transmission over twisted-pair cables according to Ethernet standardization, with a typical maximum range of 100 meters on copper cables. The fiber optic side extends this range up to 2 km, using multimode fiber with a 1300 nm wavelength. The conversion occurs without processing on higher protocol layers, minimizing latency and increasing installation simplicity.
Technology Explained Simply
The technology is based on converting electrical signals (copper) into optical signals (fiber optic) and vice versa. The module receives an electrical signal via the RJ45 interface, converts it into a light signal, which is transmitted over the multimode fiber optic cable. On the receiving side, the light signal is converted back into an electrical signal. The 1300 nm wavelength is common for multimode fibers and offers a good balance between bandwidth and attenuation. The SC connector is a standard fiber optic connector that enables a secure and easy connection.
Compatibility and Accessories
The module is specifically developed for the High-Density Media Converter System II and is used within this system. It is designed as a Layer 1 module, meaning it does not process any network layer higher than the physical layer. Compatibility is limited to use with other modules of the same system. No specific additional hardware or software is required to operate the module. Connections are made via standardized interfaces, enabling integration into existing networks without additional configuration.
Installation and Mounting
The module is installed into the High-Density Media Converter System II, which features a modular design. Installation is done by inserting the module into the appropriate slot of the system. No additional tools or configuration steps are required. Cabling is done via the RJ45 interface for the copper cable and via the SC connector for the fiber optic cable. The connection becomes active immediately after insertion, as soon as the physical connections are established.
Operational Advantages
Using this module enables extension of network reach without speed loss. Conversion at Layer 1 minimizes latency and maintains stable network performance. The multimode fiber optic cable with 1300 nm wavelength provides sufficient range for many enterprise applications. The SC connector is robust and widely used, simplifying maintenance and replacement. The module is designed for use within a system, enabling a scalable and flexible network architecture.
| General | |
| Copper interface | 100BASE-TX |
| Fibre optic interface | 100BASE-FX |
| Fibre type | Multi mode |
| Wavelength | 1300 nm |
| Fibre optic connector | SC |
| Transmission range | 2 km |
| Layer | 1 |
| System compatibility | High-Density Media Converter System II |
Questions & answers
What is the delivery time of BlackBox LMC5023C-R3 High-Density Media Converter System II, Layer 1 module, 100BASE-TX to 100BASE-FX, multimode 1300-nm, SC 2 km?
The article BlackBox LMC5023C-R3 High-Density Media Converter System II, Layer 1 module, 100BASE-TX to 100BASE-FX, multimode 1300-nm, SC 2 km is currently in stock
According to our experience the article is ready for dispatch within 96 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of BlackBox LMC5023C-R3 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you BlackBox LMC5023C-R3 High-Density Media Converter System II, Layer 1 module, 100BASE-TX to 100BASE-FX, multimode 1300-nm, SC 2 km always at the best possible price. We can give you a discount of 2% on BlackBox LMC5023C-R3 High-Density Media Converter System II, Layer 1 module, 100BASE-TX to 100BASE-FX, multimode 1300-nm, SC 2 km if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 4 pieces of BlackBox LMC5023C-R3 High-Density Media Converter System II, Layer 1 module, 100BASE-TX to 100BASE-FX, multimode 1300-nm, SC 2 km we can offer you a price of 372,54 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

