BlackBox LMC401AE Media converter 10/100BT 100BFX MM 5km ST
|
310,08 EUR |
|||||||||||
|
( 369,00 EUR incl. VAT ) ≈ £259.54 | ≈ $340.78 plus delivery charges: 55,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline | |||||||||||
| In Stock: 1 pieces | |||||||||||
| Lieske Part No.: | 481359 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | LMC401AE | ||||||||||
| Weight: | 0.44 kg | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for BlackBox LMC401AE:
Applications
The converter enables network extension over fiber optic cables, significantly increasing the range of Ethernet connections. It is ideal for applications requiring a stable, interference-free connection to the workstation or mobile end devices. The term “Fibre-to-the-Laptop” describes typical use cases where a laptop is connected to the network via fiber optic. The combination of USB power supply and compact design makes it a mobile solution that can operate without a wall socket.
Functions and Features in Detail
The UTP port supports 10/100/1000BASE-T standards, enabling connection to various network components such as switches, routers, or computers. The fiber optic connection is equipped with an ST pair, allowing connection to multimode fiber optic cables. The maximum transmission range is not explicitly stated, but typical use for multimode fiber optic cables is designed for distances up to 5 km. The device supports Jumbo Ethernet frames up to 10,240 bytes, enhancing efficiency when transmitting large data volumes. The integrated LED indicators show the status of power supply, UTP connection, and fiber optic link, enabling visual monitoring of operation.
Technology Explained Simply
The converter acts as a bridge between two different transmission media: copper cable (UTP) and fiber optic. While copper cables are suitable for short distances, fiber optic offers higher bandwidth and lower signal loss over longer distances. The converter converts electrical signals from the copper cable into optical signals for the fiber optic cable and vice versa. Autonegotiation ensures that speed and duplex mode (half- or full-duplex) are automatically negotiated between connected devices, increasing compatibility. Power supply is either via a USB port (Type Micro B) or an external power adapter rated for 100–240 VAC. The USB power supply allows flexible use, for example, from a laptop or USB power adapter. The device automatically powers off when the connected computer is shut down, saving energy.
Compatibility and Accessories
The converter is designed for use in existing Ethernet networks and is compatible with devices supporting 10/100/1000BASE-T standards. The fiber optic connection type ST pair is intended for multimode fiber optic cables. The use of an external power adapter or USB cable is possible, but not included as standard accessories.
Mounting and Installation
Installation requires no tools. The converter is simply connected between the network device (e.g., laptop, switch) and the fiber optic cable. The Plug-and-Play function enables immediate use without manual configuration. The small form factor (2.1 cm height, 4.4 cm width, 5.7 cm depth) and low weight (70.8 g without power adapter) facilitate placement at various locations, even in confined spaces.
Operational Advantages
The converter provides a reliable and cost-efficient way to extend fiber optic networks to end devices. The combination of USB power supply and compact design makes it especially suitable for mobile applications. Support for Jumbo frames improves transmission performance for large data packets. LED indicators enable quick visual fault diagnosis. The operating temperature range of 0 to +50 °C and storage temperature range of -40 to +80 °C indicate a robust construction suitable for use in various environments. The warranty is 2 years under the Double Diamond™ standard.
| General | |
| Operation mode | Converts 10/100/1000 Mbps copper to 100 Mbps fibre |
| UTP connection | RJ-45 10/100/1000BASE-T |
| Fibre optic connection | ST-pair |
| USB connection | Type Micro B |
| External power supply | 100–240 VAC, 50–60 Hz |
| USB power supply | 0,5 A @ 5 VDC |
| Operation temperature | 0 to +50 °C |
| Storage temperature | -40 to +80 °C |
| Air humidity | 5 to 95 %, non-condensing |
| Jumbo frames | up to 10.240 Bytes |
| LED indicators | Line voltage, UTP, fibre optic status |
| Warranty | 2 years Double Diamond™ (Standard) |
| Auto-negotiation | |
| Plug-and-Play | |
| TAA-compliant | |
Questions & answers
What is the delivery time of BlackBox LMC401AE Media converter 10/100BT 100BFX MM 5km ST?
The article BlackBox LMC401AE Media converter 10/100BT 100BFX MM 5km ST is currently in stock
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of BlackBox LMC401AE to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you BlackBox LMC401AE Media converter 10/100BT 100BFX MM 5km ST always at the best possible price. We can give you a discount of 2% on BlackBox LMC401AE Media converter 10/100BT 100BFX MM 5km ST if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 4 pieces of BlackBox LMC401AE Media converter 10/100BT 100BFX MM 5km ST we can offer you a price of 307,75 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

