Further information for BlackBox LMC401AE media converter 10/100BT 100BFX MM 5km ST
General
Operation mode
Converts 10/100/1000 Mbps copper to 100 Mbps fibre
UTP connection
RJ-45 10/100/1000BASE-T
Fibre optic connection
ST-pair
USB connection
Type Micro B
External power supply
100–240 VAC, 50–60 Hz
USB power supply
0,5 A @ 5 VDC
Operation temperature
0 to +50 °C
Storage temperature
-40 to +80 °C
Air humidity
5 to 95 %, non-condensing
Jumbo frames
up to 10.240 Bytes
LED indicators
Line voltage, UTP, fibre optic status
Warranty
2 years Double Diamond™ (Standard)
Auto-negotiation
Plug-and-Play
TAA-compliant
The Micro Mini Media Converter 100FX from BlackBox is a compact media converter that connects copper network cables (UTP) with fiber optic cables. It enables data transmission between a 10/100/1000BASE-T network port and a 100-Mbps duplex fiber optic port. The conversion occurs without additional configuration, as the device supports Plug-and-Play functionality and autonegotiation for speed and duplex mode. This allows for easy installation in existing networks without requiring manual settings. The device is particularly suitable for mobile applications where flexible power supply is required, such as field service operations or temporary network setups.
Applications
The converter enables network extension over fiber optic cables, significantly increasing the range of Ethernet connections. It is ideal for applications requiring a stable, interference-free connection to the workstation or mobile end devices. The term “Fibre-to-the-Laptop” describes typical use cases where a laptop is connected to the network via fiber optic. The combination of USB power supply and compact design makes it a mobile solution that can operate without a wall socket.
Functions and Features in Detail
The UTP port supports 10/100/1000BASE-T standards, enabling connection to various network components such as switches, routers, or computers. The fiber optic connection is equipped with an ST pair, allowing connection to multimode fiber optic cables. The maximum transmission range is not explicitly stated, but typical use for multimode fiber optic cables is designed for distances up to 5 km. The device supports Jumbo Ethernet frames up to 10,240 bytes, enhancing efficiency when transmitting large data volumes. The integrated LED indicators show the status of power supply, UTP connection, and fiber optic link, enabling visual monitoring of operation.
Technology Explained Simply
The converter acts as a bridge between two different transmission media: copper cable (UTP) and fiber optic. While copper cables are suitable for short distances, fiber optic offers higher bandwidth and lower signal loss over longer distances. The converter converts electrical signals from the copper cable into optical signals for the fiber optic cable and vice versa. Autonegotiation ensures that speed and duplex mode (half- or full-duplex) are automatically negotiated between connected devices, increasing compatibility. Power supply is either via a USB port (Type Micro B) or an external power adapter rated for 100–240 VAC. The USB power supply allows flexible use, for example, from a laptop or USB power adapter. The device automatically powers off when the connected computer is shut down, saving energy.
Compatibility and Accessories
The converter is designed for use in existing Ethernet networks and is compatible with devices supporting 10/100/1000BASE-T standards. The fiber optic connection type ST pair is intended for multimode fiber optic cables. The use of an external power adapter or USB cable is possible, but not included as standard accessories.
Mounting and Installation
Installation requires no tools. The converter is simply connected between the network device (e.g., laptop, switch) and the fiber optic cable. The Plug-and-Play function enables immediate use without manual configuration. The small form factor (2.1 cm height, 4.4 cm width, 5.7 cm depth) and low weight (70.8 g without power adapter) facilitate placement at various locations, even in confined spaces.
Operational Advantages
The converter provides a reliable and cost-efficient way to extend fiber optic networks to end devices. The combination of USB power supply and compact design makes it especially suitable for mobile applications. Support for Jumbo frames improves transmission performance for large data packets. LED indicators enable quick visual fault diagnosis. The operating temperature range of 0 to +50 °C and storage temperature range of -40 to +80 °C indicate a robust construction suitable for use in various environments. The warranty is 2 years under the Double Diamond™ standard.