beroNet module 1x PRI with HPC
|
-5% 395,01 EUR 415,80 EUR |
|
|
( 470,06 EUR incl. VAT ) plus delivery charges |
|
| Delivery time on requestinfo_outline | |
| Lieske Part No.: | 1705067 |
|---|---|
| Mfg Part No: | BNMO-1PRI |
| Weight: | 0.18 kg |
Product information for BeroNet BNMO-1PRI:
The BF1E1 module is a 1 port PRI/ISDN module for the berofix gateways.
Each individual port of the BF1E1 module can
be operated individually in NT (Network Termination) or TE (Terminal Equipment) mode.
The PinOut of the BF1E1 is always in TE mode with pins 1,2,4,5. For this reason, it may be necessary to use a crossover cable when operating in NT mode.
The terminating resistor of 120 Ohm can be set via DIP switches on the module.
Specifications: 1 PRI (S2M) port NT or TE mode terminating resistors 120 ohm can be set on the module via DIP switches Layer 2 is Q.921 and Layer 3 is Q.931 (EuroISDN DSS1) compatible DSS1 feature set: CLIP/No-Screening, CLIR, COLP, UUS, MCID, CD, CNIP Q.SIG Feature set: CNIP Dimensions: 105 x 46 x 9 mm Weight: < 40g Operating range: 0-70°C CE and TBR-4 compatible (ISDN PRI)
Each individual port of the BF1E1 module can
be operated individually in NT (Network Termination) or TE (Terminal Equipment) mode.
The PinOut of the BF1E1 is always in TE mode with pins 1,2,4,5. For this reason, it may be necessary to use a crossover cable when operating in NT mode.
The terminating resistor of 120 Ohm can be set via DIP switches on the module.
Specifications: 1 PRI (S2M) port NT or TE mode terminating resistors 120 ohm can be set on the module via DIP switches Layer 2 is Q.921 and Layer 3 is Q.931 (EuroISDN DSS1) compatible DSS1 feature set: CLIP/No-Screening, CLIR, COLP, UUS, MCID, CD, CNIP Q.SIG Feature set: CNIP Dimensions: 105 x 46 x 9 mm Weight: < 40g Operating range: 0-70°C CE and TBR-4 compatible (ISDN PRI)
Questions & answers
What is the delivery time of beroNet module 1x PRI with HPC?
The article beroNet module 1x PRI with HPC is currently not in stock und muss auftragsbezogen bestellt werden.
According to our experience the article is ready for dispatch within 11 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of BeroNet BNMO-1PRI to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you beroNet module 1x PRI with HPC always at the best possible price. We can give you a discount of 2% on beroNet module 1x PRI with HPC if you choose payment in advance on ordering.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
Fitting accessory for beroNet module 1x PRI with HPC
 |
beroNet cross-over cable
1.8m E1/T2,5 cm ( 1 inch )cross-overö cable to connect beroNet E1 ports to equipment where Tx / Rx has to be inter-changed Lieske Part No.: 121830 Mfg Part No: BF1E1Cross |
-14% 8,93 EUR 10,40 EUR
 plus delivery charges
Delivery time on requestinfo_outline
|