Products of BEGA
Categories with products from BEGA
- Electronics ➤ Energy ➤ Extensions / cable drums ( 2 )
- Electronics ➤ Energy ➤ Surge Protection ( 2 )
- Electrics ➤ Industrial Material ➤ Control devices / Pilot devices ➤ Built-Command and signaling devices ( 2 )
- Electrics ➤ Industrial Material ➤ Industrial Connectors ➤ CEE form connectors / combinations ( 1 )
- Electrics ➤ Installation ➤ Install Outlets and Accessories ➤ For brick / hollow wall / concrete installation boxes ( 4 )
- Light & Sound ➤ Light Systems ➤ Accessories ➤ LED-drivers divers ( 1 )
- Light & Sound ➤ Light Systems ➤ Electrical Equipment ➤ Transformer, NV electronically ( 2 )
- Light & Sound ➤ Light Systems ➤ Fluorescent Light ➤ Chandeliers / Pendants ( 1 )
- Light & Sound ➤ Light Systems ➤ Living Room Lamps ➤ Wallmount Lamps ( 1 )
- Light & Sound ➤ Light Systems ➤ Outdoor Lighting ➤ Wallmount Lamps ( 48 )
- Light & Sound ➤ Light Systems ➤ Special Purpose Lamps ➤ Note lights ( 1 )
 |
 BEGA 70837 70837Bega 70837 E-light towerBEGA light mast 70837 made of steel, certified according to EN 40. Conical, seamlessly drawn with high strength values. Lower diameter 195 mm. Mast top diameter 76 mm. Hot-dip galvanized and painted ... Lieske Part No.: 1316456 Mfg Part No: 70837 |
4.103,65 EUR
 plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70848 70848Bega 70848 mounting base corresponds to 848 BEGA screw-on base 70848, made of hot-dip galvanized steel, in accordance with EN ISO 1461 for screwing onto a foundation. Powder-coated, graphite color. 8 long fixing holes, width 22 mm. Lieske Part No.: 1319163 Mfg Part No: 70848 |
748,34 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70866 70866BEGA Limburg 70866 DALI power supply BEGA DALI power supply 70866 for DIN rail mounting, supplies DALI operating devices that do not have their own integrated power supply. Integrated relay contact with adjustable run-on time for ... Lieske Part No.: 1333139 Mfg Part No: 70866 |
177,71 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70878 70878BEGA 70878 E-light tower BEGA light mast 70878 made of steel, certified according to EN 40. Conical, seamlessly drawn with high strength values. Lower diameter 135 mm. Hot-dip galvanized and painted inside and out. Surface ... Lieske Part No.: 1319177 Mfg Part No: 70878 |
1.534,01 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70879BEGA 879 E-light pole, 879 BEGA light mast 70879 made of steel, certified according to EN 40. Conical, seamlessly drawn with high strength values. Lower diameter 140 mm. Hot-dip galvanized and painted inside and out. Surface ... Lieske Part No.: 370136 Mfg Part No: 70879 |
1.873,87 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70880Bega Light pole 880, BEGA light mast 70880 made of steel, certified according to EN 40. Conical, seamlessly drawn with high strength values. Lower diameter 115 mm. Hot-dip galvanized and painted inside and out. Surface ... Lieske Part No.: 807163 Mfg Part No: 70880 |
894,27 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70881BEGA 70881 light pole H=3000mm with base piece BEGA light mast 70881 made of steel, certified according to EN 40. Conical, seamlessly drawn with high strength values. Lower diameter 115 mm. Hot-dip galvanized and painted inside and out. Surface ... Lieske Part No.: 603434 Mfg Part No: 70881 |
924,66 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70882BEGA 70882 light pole H=3500mm with ground piece BEGA light mast 70882 made of steel, certified according to EN 40. Conical, seamlessly drawn with high strength values. Lower diameter 115 mm. Hot-dip galvanized and painted inside and out. Surface ... Lieske Part No.: 603810 Mfg Part No: 70882 |
956,54 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70883Bega Light pole 883, BEGA light mast 70883 made of steel, certified according to EN 40. Conical, seamlessly drawn with high strength values. Lower diameter 115 mm. Hot-dip galvanized and painted inside and out. Surface ... Lieske Part No.: 586037 Mfg Part No: 70883 |
1.067,32 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70884Bega Light pole 884, BEGA light mast 70884 made of steel, certified according to EN 40. Conical, seamlessly drawn with high strength values. Lower diameter 135 mm. Hot-dip galvanized and painted inside and out. Surface ... Lieske Part No.: 586603 Mfg Part No: 70884 |
1.152,26 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70885Bega Light pole 885, BEGA light mast 70885 made of steel, certified according to EN 40. Conical, seamlessly drawn with high strength values. Lower diameter 115 mm. Hot-dip galvanized and painted inside and out. Surface ... Lieske Part No.: 722351 Mfg Part No: 70885 |
980,30 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70886BEGA 70886 light pole H=5000mm with base BEGA light mast 70886 made of steel, certified according to EN 40. Conical, seamlessly drawn with high strength values. Lower diameter 135 mm. Hot-dip galvanized and painted inside and out. Surface ... Lieske Part No.: 408378 Mfg Part No: 70886 |
1.327,69 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70887Bega Light pole 887, BEGA light mast 70887 made of steel, certified according to EN 40. Conical, seamlessly drawn with high strength values. Lower diameter 135 mm. Hot-dip galvanized and painted inside and out. Surface ... Lieske Part No.: 522930 Mfg Part No: 70887 |
1.173,84 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70888BEGA 70888 light pole H=3000mm with base BEGA light mast 70888 made of steel, certified according to EN 40. Conical, seamlessly drawn with high strength values. Lower diameter 115 mm. Hot-dip galvanized and painted inside and out. Surface ... Lieske Part No.: 429614 Mfg Part No: 70888 |
935,95 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
BEGA 70889BEGA 70889 tension strap BEGA tensioning belt 70889 for the portable operation of a spotlight with a G½ connection thread in accordance with ISO 228. Tensioning belt carrier is made of cast aluminum and stainless steel. Lieske Part No.: 812175 Mfg Part No: 70889 |
208,30 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
BEGA 70894Bega planted section 894, BEGA ground piece 70894, made of hot-dip galvanized steel, in accordance with EN ISO 1461. Length 400 mm. A welded construction consisting of a base plate, pipe section and flange plate with threaded ... Lieske Part No.: 134051 Mfg Part No: 70894 |
64,94 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
BEGA 70895BEGA 70895 ground piece 400 mm for light poles and bollard lights 3x120° M8 BEGA ground piece 70895, made of hot-dip galvanized steel, in accordance with EN ISO 1461. Length 400 mm. A welded construction consisting of a base plate, pipe section and flange plate with threaded ... Lieske Part No.: 685091 Mfg Part No: 70895 |
71,18 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
|
BEGA 70896Bega sunk 896 500 mm for light poles and bollards BEGA ground piece 70896, made of hot-dip galvanized steel, in accordance with EN ISO 1461. Length 500 mm. A welded construction consisting of a base plate, pipe section and flange plate with threaded ... Lieske Part No.: 141968 Mfg Part No: 70896 |
84,94 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
BEGA 70897Bega planted section 897, BEGA ground piece 70897, made of hot-dip galvanized steel, in accordance with EN ISO 1461. Length 600 mm. A welded construction consisting of a base plate, pipe section and flange plate with threaded ... Lieske Part No.: 530762 Mfg Part No: 70897 |
271,66 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
BEGA 70898BEGA anchorage unit 898 898 898 BEGA ground piece 70898, made of hot-dip galvanized steel, in accordance with EN ISO 1461. Length 800 mm. A welded construction consisting of a base plate, pipe section and flange plate with threaded ... Lieske Part No.: 100351 Mfg Part No: 70898 |
416,99 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
BEGA 70899BEGA 70899 ground piece BEGA ground piece 70899, made of hot-dip galvanized steel, in accordance with EN ISO 1461. Length 800 mm. A welded construction consisting of a base plate, pipe section and flange plate with threaded ... Lieske Part No.: 942307 Mfg Part No: 70899 |
490,64 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70900 70900Bega 70900 E-light tower BEGA light mast 70900 made of aluminum, certified according to EN 40. Cylindrical, offset, lower diameter 135 mm, with base plate Ø 340 mm. Height above ground 4000 mm. Mast top diameter 76 mm. Door ... Lieske Part No.: 1334816 Mfg Part No: 70900 |
1.321,25 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70901 70901BEGA 70901 E-light mast H=4000mm with ground piece BEGA light mast 70901 made of aluminum, certified according to EN 40. Cylindrical, offset, lower diameter 135 mm, with anchorage 800 mm. Mast top diameter 76 mm. Height above ground 4000 mm. Door with ... Lieske Part No.: 1334815 Mfg Part No: 70901 |
1.182,85 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70902 70902Bega 70902 E-light tower BEGA light mast 70902 made of aluminum, certified according to EN 40. Cylindrical, offset, lower diameter 135 mm, with base plate Ø 340 mm. Height above ground 5000 mm. Mast top diameter 76 mm. Door ... Lieske Part No.: 1334814 Mfg Part No: 70902 |
1.647,26 EUR
plus delivery charges
Delivery time on requestinfo_outline
|