Products of BEGA
Categories with products from BEGA
- Electronics ➤ Energy ➤ Extensions / cable drums ( 2 )
- Electronics ➤ Energy ➤ Surge Protection ( 2 )
- Electrics ➤ Industrial Material ➤ Control devices / Pilot devices ➤ Built-Command and signaling devices ( 2 )
- Electrics ➤ Industrial Material ➤ Industrial Connectors ➤ CEE form connectors / combinations ( 1 )
- Electrics ➤ Installation ➤ Install Outlets and Accessories ➤ For brick / hollow wall / concrete installation boxes ( 4 )
- Light & Sound ➤ Light Systems ➤ Accessories ➤ LED-drivers divers ( 1 )
- Light & Sound ➤ Light Systems ➤ Electrical Equipment ➤ Transformer, NV electronically ( 2 )
- Light & Sound ➤ Light Systems ➤ Fluorescent Light ➤ Chandeliers / Pendants ( 1 )
- Light & Sound ➤ Light Systems ➤ Living Room Lamps ➤ Wallmount Lamps ( 1 )
- Light & Sound ➤ Light Systems ➤ Outdoor Lighting ➤ Wallmount Lamps ( 48 )
- Light & Sound ➤ Light Systems ➤ Special Purpose Lamps ➤ Note lights ( 1 )
 |
 BEGA 70793Bega light pole 793,BEGA light mast 70793, certified according to EN 40. Cylindrical with a diameter of 60 mm, without door with base plate. Height above ground 1500 mm. Aluminium, surface pre-treated, powder-coated and ... Lieske Part No.: 970203 Mfg Part No: 70793 |
271,26 EUR
 plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70794BEGA luminaire mast 794, BEGA light mast 70794 made of aluminum, certified according to EN 40. Conical, lower diameter 135 mm, with base plate Ø 340 mm. Height above ground 5000 mm. Mast top diameter 76 mm. Door with square ... Lieske Part No.: 812260 Mfg Part No: 70794 |
1.942,48 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70796BEGA 70796 grid BEGA louvre 70796 for BEGA spotlights. The louvre prevents lateral viewing up to 45° from all directions. Aluminium and stainless steel painted matt black. Lieske Part No.: 915287 Mfg Part No: 70796 |
73,16 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70800Bega light pole 800, galvanized steel embedded base with conical BEGA light mast 70800 made of steel, certified according to EN 40. Conical, seamlessly drawn with high strength values. Lower diameter 115 mm. Hot-dip galvanized inside and out, unpainted. Door with ... Lieske Part No.: 589257 Mfg Part No: 70800 |
771,21 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70801Bega Lighting Pole 3000mm H = 801, galvanized steel embedded base with conical BEGA light mast 70801 made of steel, certified according to EN 40. Conical, seamlessly drawn with high strength values. Lower diameter 115 mm. Hot-dip galvanized inside and out, unpainted. Door with ... Lieske Part No.: 815347 Mfg Part No: 70801 |
782,50 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70802Bega Light pole 802, BEGA light mast 70802 made of steel, certified according to EN 40. Conical, seamlessly drawn with high strength values. Lower diameter 115 mm. Hot-dip galvanized inside and out, unpainted. Door with ... Lieske Part No.: 790139 Mfg Part No: 70802 |
802,99 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70803BEGA luminaire mast 803, BEGA light mast 70803 made of steel, certified according to EN 40. Conical, seamlessly drawn with high strength values. Lower diameter 115 mm. Hot-dip galvanized inside and out, unpainted. Door with ... Lieske Part No.: 113747 Mfg Part No: 70803 |
881,89 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70804Bega Light pole 804, BEGA light mast 70804 made of steel, certified according to EN 40. Conical, seamlessly drawn with high strength values. Lower diameter 135 mm. Hot-dip galvanized inside and out, unpainted. Door with ... Lieske Part No.: 946643 Mfg Part No: 70804 |
942,88 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70805Bega Light pole 805, BEGA light mast 70805 made of steel, certified according to EN 40. Conical, seamlessly drawn with high strength values. Lower diameter 135 mm. Hot-dip galvanized inside and out, unpainted. Door with ... Lieske Part No.: 296584 Mfg Part No: 70805 |
1.080,49 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70806Bega Light pole 806, BEGA light mast 70806 made of steel, certified according to EN 40. Conical, seamlessly drawn with high strength values. Lower diameter 140 mm. Mast top diameter 76 mm. Hot-dip galvanized inside and ... Lieske Part No.: 905113 Mfg Part No: 70806 |
1.271,46 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70807Bega Light pole 807, BEGA light mast 70807 made of steel, certified according to EN 40. Conical, seamlessly drawn with high strength values. Lower diameter 160 mm. Mast top diameter 76 mm. Hot-dip galvanized inside and ... Lieske Part No.: 789109 Mfg Part No: 70807 |
1.755,17 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70808Bega Lighting Pole 8000mm H = 808, galvanized steel embedded base with conical BEGA light mast 70808, certified according to EN 40. Conical, seamless drawn with high strength values. Lower diameter 170 mm. Steel, hot-dip galvanized inside and out, unpainted. Door with square ... Lieske Part No.: 266437 Mfg Part No: 70808 |
1.969,70 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70809BEGA 70809 light pole H=9000mm with ground piece BEGA light mast 70809 made of steel, certified according to EN 40. Conical, seamlessly drawn with high strength values. Lower diameter 195 mm. Mast top diameter 76 mm. Hot-dip galvanized inside and ... Lieske Part No.: 691753 Mfg Part No: 70809 |
2.855,56 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70811BEGA 70811 light pole H=3000mm with base BEGA light mast 70811 made of steel, certified according to EN 40. Conical, seamlessly drawn with high strength values. Lower diameter 115 mm. Hot-dip galvanized inside and out, unpainted. Door with ... Lieske Part No.: 456084 Mfg Part No: 70811 |
792,99 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70814BEGA 814 E-light pole, 814 BEGA light mast 70814 made of steel, certified according to EN 40. Conical, seamless drawn with high strength values. Lower diameter 135 mm. Hot-dip galvanized inside and out, unpainted. Door with ... Lieske Part No.: 727792 Mfg Part No: 70814 |
1.346,60 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70815BEGA luminaire mast 815, BEGA light mast 70815 made of steel, certified according to EN 40. Conical, seamlessly drawn with high strength values. Lower diameter 115 mm. Hot-dip galvanized inside and out, unpainted. Door with ... Lieske Part No.: 558972 Mfg Part No: 70815 |
810,12 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70816 70816Bega 70816 E-light tower corresponds to 816 BEGA light mast 70816 made of steel, certified according to EN 40. Conical, seamless drawn with high strength values. Lower diameter 140 mm. Mast top diameter 76 mm. Hot-dip galvanized inside and out, ... Lieske Part No.: 1319166 Mfg Part No: 70816 |
1.574,50 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70817BEGA luminaire mast 817, BEGA light mast 70817 made of steel, certified according to EN 40. Conical, seamlessly drawn with high strength values. Lower diameter 135 mm. Hot-dip galvanized inside and out, unpainted. Door with ... Lieske Part No.: 701624 Mfg Part No: 70817 |
969,90 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70819 70819BEGA 70819 mounting base (old item no.: 819) BEGA screw-on base 70819, made of hot-dip galvanized steel, in accordance with EN ISO 1461 for screwing onto a foundation. Powder-coated, color graphite. 4 mounting holes, width 18 mm. Lieske Part No.: 1319165 Mfg Part No: 70819 |
498,27 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70829 70829BEGA 70829 mounting base (old item no.: 829) BEGA screw-on base 70829, made of hot-dip galvanized steel, in accordance with EN ISO 1461 for screwing onto a foundation. Powder-coated, color graphite. 4 mounting holes, width 18 mm. Lieske Part No.: 1319164 Mfg Part No: 70829 |
512,72 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70833BEGA 70833 mounting base BEGA screw-on base 70833, made of hot-dip galvanized steel, in accordance with EN ISO 1461 for screwing onto a foundation. Powder-coated, color graphite. 4 mounting holes, width 18 mm. Lieske Part No.: 489005 Mfg Part No: 70833 |
523,81 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70834Bega Lichtmast H=6000mm 834, Stahl feuerverzinkt lackiert D=76mm BEGA light mast 70834 made of steel, certified according to EN 40. Conical, seamlessly drawn with high strength values. Lower diameter 140 mm. Mast top diameter 76 mm. Hot-dip galvanized and painted ... Lieske Part No.: 176936 Mfg Part No: 70834 |
1.513,61 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70835BEGA 70835 E-light pole H = 7000mm BEGA light mast 70835 made of steel, certified according to EN 40. Conical, seamlessly drawn with high strength values. Lower diameter 160 mm. Mast top diameter 76 mm. Hot-dip galvanized and painted ... Lieske Part No.: 371448 Mfg Part No: 70835 |
2.594,99 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
BEGA 70836BEGA 70836 E-light pole H = 8000mm BEGA light mast 70836, certified according to EN 40. Conical, seamlessly drawn with high strength values. Lower diameter 170 mm. Steel, hot-dip galvanized and painted inside and out. Surface ... Lieske Part No.: 371483 Mfg Part No: 70836 |
3.051,38 EUR
plus delivery charges
Delivery time on requestinfo_outline
|