Accessories from BEGA Gantenbrink

BEGA installation component 13216 ¿ track adapter type D ¿ for use indoors. For the integration of a BEGA system pendant luminaire into surface-mounted and recessed track systems 3-phase EUROSTANDARD-PLUS®. With LED power supply unit, DALI-controllable, for a current of 0.7 A, for the connection of a BEGA system pendant luminaire with a power of max. 29 W. Protection type IP 20. Protection class II. For the connection of a cable pendant 2 x 0.75 qmm, color black. Canopy surface color velvet white. Dimensions: 260 x 35 x height 110 mm.
Lieske Part No.: 666768

BEGA installation component 13218 ¿ track adapter type D ¿ for use indoors. For the integration of a BEGA system pendant luminaire into surface-mounted and recessed track systems 3-phase EUROSTANDARD-PLUS®. With LED power supply unit, DALI-controllable, for a current of 0.5 A, for the connection of a BEGA system pendant luminaire with an output of 2.5 - 21 W. Protection type IP 20. Protection class II. For the connection of a cable pendant 2 x 0.75 qmm, color white. Canopy surface color velvet white. Dimensions: 260 x 35 x height 110 mm.
Lieske Part No.: 666769

BEGA installation component 13220 ¿ track adapter type D ¿ for indoor use. For the integration of a BEGA system pendant light in surface-mounted and recessed track systems 3-phase EUROSTANDARD-PLUS®. With LED power supply, on/off, for a current of 350 mA, for the connection of a BEGA system pendant light with an output of 1.8 - 14.7 W. Protection type IP 20. Protection class II. For the connection of a cable pendant 2 x 0.5 mm², color white. Canopy surface velvet white. Dimensions: 235 x 35 x height 110 mm.
Lieske Part No.: 666770

BEGA installation component 13225 ¿ track adapter type D ¿ for indoor use. For the integration of a BEGA system pendant luminaire into surface-mounted and recessed track systems 3-phase EUROSTANDARD-PLUS®. Track adapter (DALI) for mains voltage ¿ without integrated power supply. Input voltage: 250 V - 50-60 Hz Protection type IP 20. Protection class I. For connecting a cable pendant 5 x 0.75 qmm with a steel cable, color white. Canopy surface color velvet black. Dimensions: 195 x 35 x height 100 mm.
Lieske Part No.: 666771

BEGA installation component 13232 ¿ surface-mounted canopy type B ¿ for indoor use. For mounting and electrical installation of a BEGA system pendant light on sloped and straight suspended ceilings. Suitable for sloped ceilings with a slope of 0-40°. With LED power supply, on/off, for a current of 350 mA, for connecting a BEGA system pendant light with an output of 3.5 - 15 W. Protection type IP 20. Protection class I. Canopy surface velvet white. Dimensions: 175 x 65 x height 65 mm.
Lieske Part No.: 666774

BEGA connection column 13543 with earth spike, portable, for use in private areas. Built-in components: 2 earthed sockets 16 A, 250 volts. Belgian/French standard. Plug type E. Housing and earth spike made of plastic (polyamide), glass fiber reinforced, color graphite. Protection class IP 44. With permanently connected connection cable H07RN-F 3 G 1.5 mm², length 5 m, with plug. Dimensions: 75 x 125 mm. Height above floor 160 mm.
Lieske Part No.: 327897

BEGA Smart Tower 13566 for the LED lighting system BEGA Plug & Play. Housing made of plastic (polyamide), glass fiber reinforced, graphite color. With 5 m connection cable H05RN-F 3 G 1 qmm, black with safety plug. Secondary: 48 V = DC · 0 - 50 W. 4 outputs, individually switchable and dimmable, for connecting lights and distributors. Connected load max. 50 W. Protection class IP 65. Dimensions: Ø 130 x 75 mm.
Lieske Part No.: 328885

BEGA Smart Extender 13568 for the BEGA Plug & Play LED lighting system. Housing made of plastic (polyamide), glass fiber reinforced, graphite color. With connecting cable H05RN-F 3 x 0.75 mm², length 5 m with 48 V plug. 4 outputs, individually switchable and dimmable, for connecting lights and distributors. Protection class IP 65. Dimensions: Ø 130 x 65 mm.
Lieske Part No.: 328887

BEGA 70039 antenna with wall bracket for mounting outside a luminaire. 2.4 GHz with SMA socket. Dimensions Ø 30 x 90 mm.
Lieske Part No.: 321452

BEGA 70049 Zigbee control module IP 20 with integrated 2.4 GHz antenna and DALI interface for use indoors and wherever a higher protection class is not required. DALI control output for joint switching and dimming of 5 DALI operating devices. Output for operating devices with a switching capacity of 2000 W · cos phi = 1, 1000 VA · cos phi = 0.5. Can be used as a router or coordinator in Zigbee networks. Voltage 100 - 240 V, 50 / 60 Hz.
Lieske Part No.: 321453

BEGA ZigBee circuit breaker no. 71021, with integrated 2.4 GHz antenna for DIN rail mounting. The control module can be used as a router or coordinator in ZigBee networks. Relay contact with a switching capacity of 3,600 VA, 16 A. Two inputs for conventional pushbutton or binary contacts. Supply voltage: 220-240 volts, 50 Hz. Operating temperature: -20° C to 45° C.
Lieske Part No.: 321454

BEGA Zigbee control module 71052 with integrated 2.4 GHz antenna for installation in switch and cavity boxes. The control module can be used as a router or coordinator in Zigbee networks. Module for installation in switch and cavity boxes with integrated 2.4 GHz antenna. Switching contact (triac) with a switching capacity of 2 x 500 VA · 2 A. Two inputs for conventional button or binary contacts. Flexible connection wires with connection terminals 2.5 mm², length 140 mm. Supply voltage: 220-240 V - 50 Hz.
Lieske Part No.: 321458

BEGA screw-on base 71199, made of hot-dip galvanized steel, in accordance with EN ISO 1461 for screwing onto a foundation. Powder-coated, color graphite. 4 mounting holes, width 30 mm.
Lieske Part No.: 667055

BEGA connection column 71228, stationary. Built-in components: 4 earthed sockets 16 A, 250 volts. Plug type F: system widely used in Germany and Europe. Protection class IP 44. Cast aluminum, aluminum and stainless steel coating technology BEGA Unidure®, color graphite. With mounting plate for screwing onto a foundation or onto the anchor unit 70895. 3 cable entries for through-wiring the mains connection cable max. ø 17 mm. Dimensions: 105 x 550 x 165 mm.
Lieske Part No.: 675383

BEGA connection column 71229, stationary. Built-in components: 3 earthed sockets 16 A, 250 volts. Plug type F: system common in Germany and Europe. 1 universal on/off switch 1-pole 10 A, 250 V ?. Protection class IP 44. Cast aluminum, aluminum and stainless steel coating technology BEGA Unidure®, color graphite. 3 cable entries for through-wiring the mains connection cable max. ø 17 mm. With mounting plate for screwing onto a foundation or onto the anchor unit 70895. Dimensions: 105 x 550 x 165 mm.
Lieske Part No.: 675384

BEGA connection column 71230, stationary. Without installation inserts for a maximum of 4 inserts. Cast aluminum, aluminum and stainless steel coating technology BEGA Unidure®, color graphite. 3 cable entries for through-wiring of the mains connection cable max. ø 17 mm. With mounting plate for screwing onto a foundation or onto the anchor unit 70895. Dimensions: 75 x 500 x 155 mm.
Lieske Part No.: 675385

BEGA screw-on base 71243, made of hot-dip galvanized steel, in accordance with EN ISO 1461 for screwing onto a foundation. Powder-coated, color graphite. 4 mounting holes, width 13.5 mm.
Lieske Part No.: 670915

BEGA connection column 71253, stationary. Built-in components: 2 earthed sockets 16 A, 250 volts. Protection class IP 44. Cast aluminum, aluminum and stainless steel coating technology BEGA Unidure®, color graphite. 3 cable entries for through-wiring of the mains connection cable max. ø 17 mm. With mounting plate for screwing onto a foundation or onto the anchor unit 70895. Dimensions: 105 x 550 x 165 mm.
Lieske Part No.: 675386

BEGA connection column 71254, stationary. Built-in components: 1 earthed socket 16 A, 250 volts. Plug type F: system commonly used in Germany and Europe. 1 universal on/off switch 1-pole 10 A, 250 V ?. Protection class IP 44. Cast aluminum, aluminum and stainless steel coating technology BEGA Unidure®, color graphite. 3 cable entries for through-wiring the mains connection cable max. ø 17 mm. With mounting plate for screwing onto a foundation or onto the anchor unit 70895. Dimensions: 105 x 550 x 165 mm.
Lieske Part No.: 675387

BEGA connection column 71255, stationary. Without installation inserts for a maximum of 2 inserts. Cast aluminum, aluminum and stainless steel coating technology BEGA Unidure®, color graphite. 3 cable entries for through-wiring of the mains connection cable max. ø 17 mm. With mounting plate for screwing onto a foundation or onto the anchor unit 70895. Dimensions: 105 x 550 x 165 mm.
Lieske Part No.: 675389

BEGA blind cover 71257 for connection columns without installation inserts. The blind cover is used to properly close unused installation openings on the connection columns 71 230 and 71 255.
Lieske Part No.: 675492

BEGA BugSaver® control unit in device box 71304. Ready-to-connect unit for installation, e.g. in light masts, bollard lights and suspended ceilings, as well as for all types of installation outside of lights or groups of lights. Control unit for BEGA BugSaver® top-mounted lights for switching the colour temperature from 3000 K to 1800 K to protect nocturnal insects. Power can also be reduced. Switching is carried out either by a switched control phase or by virtual midnight calculation. Integrated DALI power supply for up to 9 DALI operating devices (2 mA each).
Lieske Part No.: 675480

BEGA BugSaver control unit in connection box 71305 for installation in light masts. Control unit for BEGA BugSaver luminaires for switching the colour temperature from 3000 K to 1800 K to protect nocturnal insects. Power can also be reduced. Switching is carried out either by a switched control phase or by virtual midnight calculation. Integrated DALI power supply for up to 9 DALI operating devices (2 mA each).
Lieske Part No.: 675379