APC Smart-UPS X 1500 Rack/Tower LCD UPS 230 V 1200 W 1500 VA Ethernet RS-232 USB 8x output sockets 2 U Black content_copy

The APC Smart-UPS X SMX1500RMI2UNC is an uninterruptible power supply (UPS) in rackmount/tower design with an output capacity of 1.5 kVA and an output power of 1200 W. It provides power supply and protection for IT and network equipment against power outages, voltage fluctuations, overvoltages, and other grid disturbances. The UPS operates using line-interactive topology and delivers a pure sine wave output signal during battery operation, which is important for sensitive devices such as servers, switches, or storage systems. The nominal output voltage is 230 V, the input voltage ranges from 151 V to 302 V, and the frequency is 50/60 Hz. Automatic voltage regulation ensures stable power supply, even during minor grid fluctuations.

Applications

The UPS is suitable for use in small and medium-sized enterprises as well as in data centers where continuous power supply for IT infrastructure is required. It protects against short-term power outages and voltage sags that could lead to data loss or hardware damage. The combination of rack and tower operation enables flexible installation, whether in a 19-inch rack or as a freestanding unit.

Functions and Equipment in Detail

The front panel features an LCD display and LED indicators showing the operating status, battery charge level, and other parameters. The connections include eight C13 outlets, which are switchable in two groups via IEC jumpers, enabling targeted control of connected devices. An EPO (Emergency Power-Off) connection allows for safe shutdown in an emergency. The UPS supports cold start, meaning it can be activated even without mains power supply.

Technology Explained Simply

The UPS uses a sealed lead-acid battery (VRLA) with a capacity of 311 VAh. At full load, the typical backup time is 5.8 minutes; at half load, it is 17.2 minutes. The battery can be charged with temperature compensation, which extends its lifespan. Battery charging time is three hours. Battery life is up to five years, although environmental conditions such as temperature and power quality can influence lifespan. An automatic battery test regularly checks the battery condition.

Compatibility and Accessories

The UPS is equipped with a SmartSlot, into which a network management card (NMC) is installed, enabling remote monitoring and control via SNMP. The included network card supports the PowerChute Network Shutdown software, which enables controlled shutdown of servers and virtual machines in the event of a power failure. External battery packs (e.g., SMX48RMBP2U) can be connected to extend backup time. The UPS automatically detects external batteries.

Mounting and Installation

The device is designed for 2U rack mounting and can also be operated as a tower unit. The delivery includes the rack mounting kit, an RS-232 cable, a USB cable, a quick installation guide, and a software CD. Cable length is 1.83 m. Mounting is done using the included 4-post rack brackets or the feet for tower operation.

Advantages in Operation

The UPS achieves an efficiency of 98.5 % in online mode, resulting in low energy consumption and a low noise level of 40 dB. Integrated energy consumption measurement enables monitoring of power usage. The devices are intended for indoor use, with an operating temperature of 0 to 40 °C and relative humidity of 0 to 95 %. Maximum operating altitude is 3000 m. The UPS complies with standards CE, VDE, RoHS, REACH, PEP, and EOLI, as well as EN 50091-1 and EN 50091-2.

Battery
Battery technology	Sealed Lead Acid (VRLA)
Battery capacity	311 VAh
Typical backup time at full load	5.8 min
Typical backup time at half load	17.2 min
Battery life (max)	5 year(s)
Battery recharge time	3 h
Hot-swap battery
Automatic battery test
Cold start
Certificates
Compliance certificates	RoHS
Certification	C-tick, CE, EN 50091-1, EN 50091-2, VDE, REACH, PEP, EOLI
Design
Form factor	Rackmount/Tower
Rack capacity	2U
Cable length	1.83 m
Product colour	Black
Display type	LCD
LED indicators
Features
UPS topology	Line-Interactive
Output power capacity	1.5 kVA
Output power	1200 W
Waveform	Sine
Input operation voltage (min)	151 V
Input operation voltage (max)	302 V
Input frequency	50/60 Hz
Output frequency regulation	50/60 Hz
Surge energy rating	645 J
Efficiency	98.5%
Noise level	40 dB
Audible alarm modes	Low battery alarm, Overload alarm
Automatic Voltage Regulation (AVR)
Emergency Power Off (EPO)
Surge protection
Audible alarm(s)
Auto-restart
Logistics data
Products per pallet	8 pc(s)
Harmonized System (HS) code	85078000
Total carbon footprint (kg of CO2e)	1419.64
Operational conditions
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-15 - 45 °C
Operating relative humidity (H-H)	0 - 95%
Storage relative humidity (H-H)	0 - 95%
Operating altitude	0 - 3000 m
Non-operating altitude	0 - 15000 m
Other features
Nominal output voltage	230 V
Nominal input voltage	230 V
Packaging content	Removable support feet
Packaging content
Cables included	RS-232, USB cable
Rack mount kit
Management card included
Quick installation guide
Packaging data
Package width	589 mm
Package depth	620 mm
Package height	246 mm
Package weight	30 kg
Software CD
Ports & interfaces
AC outlet types	C13 coupler
Power plug	C14 coupler
AC outlets quantity	8 AC outlet(s)
Number of output IEC jumpers	2
USB port
SmartSlot
SmartConnect port
Weight & dimensions
Width	432 mm
Depth	490 mm
Height	89 mm
Weight	24.8 kg

---