Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English
AKNord Logo

AKNord LPT2USB-DE LPT2USB cable

Your rating:
Average rating
product review for AKNord LPT2USB-DE LPT2USB cable
( 0 / 5 ) 0 ratings
64,90 EUR
( 77,23 EUR incl. VAT )
≈ £54.06  |  ≈ $71.20
plus delivery charges: 55,00 €
On order · Delivery time approx. 20 workdaysinfo_outline
1x AKNord LPT2USB-DE LPT2USB cable
Lieske Part No.:651816
Mfg Part No: LPT2USB-DE
Weight:0.3 kg

Product information for AKNord LPT2USB-DE:

The AKNord LPT2USB-DE is an adapter that connects USB printers and multifunction devices to the parallel LPT interface (Centronic 25-pin SUB-D) of PCs or older machines. It enables the use of modern USB printers on systems that do not have a USB interface, such as older computers or industrial devices. The connection is made via a cable approximately 1.8 metres in length, featuring a Centronic 25-pin SUB-D plug (IEEE-1284 - A) at one end and a USB plug (Type B) at the other. Power supply is provided by a power adapter with an input range of 10 to 240 volts at 50/60 Hz, delivering an output voltage of 5 volts at a current of approximately 100 mA.

Applications
This adapter is specifically designed for environments where older computers or machines with parallel interfaces are still in use, but modern USB printers need to be connected. It is suitable, for example, in industrial facilities, for maintaining legacy office equipment, or in installations where hardware modernisation is being carried out gradually. Compatibility with USB 1.0, USB 1.1, and USB 2.0 ensures broad applicability across various systems.

Functions and Features in Detail
The LPT2USB-DE supports printing functions SPP, ECP, and IEEE1284, including version IEEE1284.4. Bidirectional communication is enabled via modes Nibble, Byte, ECP-Reverse, and BECP-Reverse. The interface operates in Low-Speed mode at a speed of 1.5 MBit/s and in Full-Speed mode at 12 MBit/s. The USB interface is implemented as Printer-Class, enabling direct recognition by the operating system. No additional drivers are required for printing, as the adapter directly supports the necessary protocols.

Technology Explained Simply
The adapter acts as a bridge between the parallel LPT interface and the USB port. It converts parallel data transmission into serial USB transmission, ensuring the printer can be recognised and controlled by the computer. Power supply is provided externally via the power adapter, allowing the adapter to operate independently of the connected device’s power supply. Support for IEEE1284.4 enables bidirectional communication, which is necessary for the printer to send feedback to the computer, such as status indication or error reporting.

Compatibility and Accessories
The adapter is designed for printers equipped with a USB port and supporting the mentioned printing protocols. Only printing functions are supported; scanning, PC fax, or software toolboxes are not possible. GDI printers cannot be used, as they require specific driver requirements that the adapter does not meet. Compatibility with USB 2.0 allows connection to modern computers, while support for USB 1.0 and 1.1 also covers older systems.

Installation and Mounting
Installation is carried out by directly connecting the Centronic plug to the LPT port of the computer and the USB plug to an available USB port. The external power adapter is connected to a power outlet. Software installation is not required, as the adapter is recognised as a standard Printer-Class. Configuration is handled via integrated firmware, which can be updated via Flash-Update. A status print is also possible to check the operational state of the adapter.

Operational Advantages
Using the LPT2USB-DE allows modern printers to be used with older systems without hardware modifications. Simple installation and driver independence reduce setup time. The external power supply ensures stable operating voltage, independent of the connected device’s power supply. Support for various printing protocols and bidirectional communication ensures reliable data transmission and printer feedback.

General
LPT connectorCentronic 25pin SUB-D connector IEEE-1284 - A
Cable length1,8 m
Power supply input10-240 V
Power supply frequency50/60 Hz
Power supply output5 V
Power supply output current100 mA
USB interfaceCompatible with USB 1.0, USB 1.1, USB 2.0
USB transfer speedLow-Speed 1.5 MBit/s, Full-Speed 12 MBit/s
USB classPrinter
Supported print protocolsSPP, ECP, IEEE1284, IEEE1284.4
Driver requirementno drivers required
Supported functionsPrinting only
GDI printernot supported
Scanningnot supported
PC faxnot supported
Software toolboxesnot supported
Flash updateYes
Status printYes


Questions & answers

What is the delivery time of AKNord LPT2USB-DE LPT2USB cable?

The article AKNord LPT2USB-DE LPT2USB cable is currently not in stock but has been backordered.

According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of AKNord LPT2USB-DE to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you AKNord LPT2USB-DE LPT2USB cable always at the best possible price. We can give you a discount of 2% on AKNord LPT2USB-DE LPT2USB cable if you choose payment in advance on ordering.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x AKNord LPT2USB-DE LPT2USB cable
AKNord LPT2USB-DE LPT2USB cable
64,90 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: AKNord LPT2USB-DE LPT2USB cable
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
6 + 3 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.