ABB 2CDG110071R0011 Universal I/O concentrator, 32-channel
|
515,85 EUR 521,73 EUR |
|||||||||||
|
( 613,86 EUR incl. VAT ) ≈ £431.77 | ≈ $566.92 plus delivery charges: 55,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 1 workdaysinfo_outline | |||||||||||
| In Stock: 2 pieces | |||||||||||
| Lieske Part No.: | 335761 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | 2CDG110071R0011 | ||||||||||
| UPC/EAN: | 4016779655774 | ||||||||||
| Weight: | 0.15 kg | ||||||||||
| Type: | UK/S 32.2 | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for ABB 2CDG110071R0011:
Universal I/O Concentrator
The concentrator serves as an interface between physical control elements such as pushbuttons or signal lamps and the KNX network. Each of the 32 channels can be independently configured to either capture input signals (e.g. from pushbuttons) or transmit output signals (e.g. for controlling lamps). The functions are controllable via the KNX system, enabling central monitoring and control of control elements in a building. The maximum switching power is 2 VA, and the maximum switching current is 0.08 A. Power supply is via an external 12- or 24-V-DC source, which is not part of the device.
Application Areas
The device is particularly suitable for applications where multiple control elements or indicator lamps are combined in a central panel, such as in control rooms, elevator controls or industrial control systems. It enables the integration of mechanical switches into a digital KNX system, allowing existing installations to be connected with modern building automation. The 32 channels provide sufficient capacity for extensive control panels.
Functions and Equipment in Detail
The concentrator features an integrated bus coupling, enabling direct communication with the KNX bus. The channels are individually configurable, allowing inputs (e.g. pushbuttons) or outputs (e.g. signal lamps) to be implemented according to application requirements. LED control is possible, although no LED indicator is integrated into the device itself. Remote control is possible via the KNX system, enabling control through a central control unit or gateway.
Technology Explained Simply
The 32 channels of the concentrator operate independently and can be configured as input or output as required. Inputs capture signals from external pushbuttons, while outputs control external loads such as signal lamps. Communication takes place via the KNX bus, enabling data transmission over the building automation network. Protection class IP20 protects against finger contact and solid foreign objects, but is not suitable for outdoor use or in damp rooms. The operating voltage of 24 V DC is a standard voltage in building automation and is typically supplied via a separate power source.
The maximum switching power of 2 VA and maximum switching current of 0.08 A are sufficient for controlling signal and indicator lamps. An external auxiliary voltage of 12 or 24 V DC is required to operate the internal switching functions. Mounting is in a REG module frame, enabling standard installation in enclosures or distributors.
Compatibility and Accessories
The device is designed for use in the KNX system and features an integrated bus coupling. It is not compatible with other bus systems such as KNX-RF, Funkbus, LON or Powernet. Use with other systems is not intended. Configuration is performed via the KNX system, enabling setup through central control software or a gateway. Connection to external pushbuttons or lamps is made via the 32 channels, each representing an input or output.
Mounting and Installation
Mounting is in a REG module frame, enabling standard installation in enclosures or distributors. The width is 4 module units, corresponding to the standard width for a module in a REG frame. Connection to the KNX bus is via the integrated bus coupling. Channel configuration is performed via the KNX system, allowing functions (input/output) to be configured according to application requirements.
Operational Advantages
The concentrator enables integration of mechanical control elements into a digital KNX system, allowing existing installations to be modernized. The 32 channels provide sufficient capacity for extensive control panels. Remote control via the KNX system enables central control and monitoring. Mounting in a REG frame is standardized and simplifies installation. Protection class IP20 is suitable for indoor use, although the device is not intended for outdoor use or in damp rooms. The external power supply of 12 or 24 V DC is required, ensuring operational reliability.
KNX-System
The device is part of the KNX system, an open standard for building automation. Communication takes place via the KNX bus, enabling data transmission over the building automation network. Configuration is performed via the KNX system, allowing functions (input/output) to be configured according to application requirements. Remote control is possible via the KNX system, enabling control through a central control unit or gateway. The integrated bus coupling enables direct connection to the KNX bus.
Power Supply
The operating voltage is 24 V DC, with an external auxiliary voltage of 12 or 24 V DC required. The maximum switching power is 2 VA, and the maximum switching current is 0.08 A. The power supply is sufficient for controlling signal and indicator lamps. The external power supply is required to operate the internal switching functions.
Protection Class IP20
Protection class IP20 protects against finger contact and solid foreign objects. The device is suitable for indoor use, although it is not intended for outdoor use or in damp rooms. Protection class IP20 is a standard protection class for devices in indoor environments that do not come into contact with water or moisture.
Mounting Type REG
Mounting is in a REG module frame, enabling standard installation in enclosures or distributors. The width is 4 module units, corresponding to the standard width for a module in a REG frame. Mounting is simple and standardized, enabling easy installation in existing enclosures or distributors.
Configuration
Channel configuration is performed via the KNX system, allowing functions (input/output) to be configured according to application requirements. The 32 channels are individually configurable, enabling inputs (e.g. pushbuttons) or outputs (e.g. signal lamps) to be implemented as needed. Configuration is performed via central control software or a gateway, enabling flexible and adaptable setup.
Remote Control
Remote control is possible via the KNX system, enabling control through a central control unit or gateway. Communication takes place via the KNX bus, enabling data transmission over the building automation network. Remote control enables central control and monitoring of control elements.
Inputs and Outputs
The 32 channels can be individually configured as input or output. Inputs capture signals from external pushbuttons, while outputs control external loads such as signal lamps.
Application in Control and Display Panels
The device is particularly suitable for applications where multiple control elements or indicator lamps are combined in a central panel, such as in control rooms, elevator controls or industrial control systems. It enables the integration of mechanical switches into a digital KNX system, allowing existing installations to be connected with modern building automation. The 32 channels provide sufficient capacity for extensive control panels.
Universal I/O Concentrator
KNX-System
Power Supply
Protection Class IP20
Mounting Type REG
Configuration
Remote Control
Inputs and Outputs
Application in Control and Display Panels
Universal I/O Concentrator
KNX-System
Power Supply
Protection Class IP20
Mounting Type REG
Configuration
Remote Control
Inputs and Outputs
Application in Control and Display Panels
| General | |
| Other bus systems | Other |
| Mounting method | DRA (DIN-rail adapter) |
| Width in number of modular spacings | 4 |
| Number of input channels | 32 |
| Number of inputs | 32 |
| Max. switching current | 0.08 |
| Max. switching power | 2 |
| Input voltage | 24 |
| Number of output channels | 32 |
| Max. number of switching contacts | 32 |
| Type of current | DC |
| Degree of protection (IP) | IP20 |
| Bus system KNX | |
| Bus system KNX radio | |
| Bus system radio frequent | |
| Bus system LON | |
| Bus system Powernet | |
| Remote operation possible | |
| Ethernet | |
| Bus connection included | |
| LED controlling | |
| With LED indication | |
| Local operation/hand operation | |
| Suitable for C-load | |
| With switch function | |
| External signal voltage necessary | |
| Different phases connectable | |
Questions & answers
What is the delivery time of ABB 2CDG110071R0011 Universal I/O concentrator, 32-channel?
The article ABB 2CDG110071R0011 Universal I/O concentrator, 32-channel is currently in stock
According to our experience the article is ready for dispatch within 1 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of ABB 2CDG110071R0011 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you ABB 2CDG110071R0011 Universal I/O concentrator, 32-channel always at the best possible price. We can give you a discount of 2% on ABB 2CDG110071R0011 Universal I/O concentrator, 32-channel if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 3 pieces of ABB 2CDG110071R0011 Universal I/O concentrator, 32-channel we can offer you a price of 492,64 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
This product is recommended as accessory for
|
ABB 2CDG110070R0011 NTU/S12.2000.1 uninterrupted power supply 2A, REG
to provide an uninterruptible SELV 12 V DC supply with a max. output current of 2 A. Particularly suitable for supplying security technology components or as an auxiliary power supply for KNX devices.Lieske Part No.: 120812 Mfg Part No: 2CDG110070R0011 Type: NTU/S12.2000.1 |
341,05 EUR 345,51 EUR
![]() ≈ £285.46 | ≈ $374.81
Made to order · Delivery time approx. 8 workdaysinfo_outline
|





