Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English
ABB Logo

ABB 2CDG110060R0011 Diagnosis and protection module DSM/S 1.1

Your rating:
Average rating
product review for ABB 2CDG110060R0011 Diagnosis and protection module DSM/S 1.1
( 4.4 / 5 ) 30 ratings
ABB 2CDG110060R0011
This image may differ from the desired article.
ABB 2CDG110060R0011ABB 2CDG110060R0011
76,95 EUR 78,21 EUR
( 91,57 EUR incl. VAT )
≈ £64.41  |  ≈ $84.57
plus delivery charges: 55,00 €
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
In Stock: >5 pieces
1x ABB 2CDG110060R0011 Diagnosis and protection module DSM/S 1.1
Lieske Part No.:414872
Mfg Part No: 2CDG110060R0011
UPC/EAN: 4016779652056
Weight:0.1 kg
Type:DSM/S 1.1
Graduated prices net
From piecesPrice per pieces
674,64 EUR
1272,33 EUR
2470,02 EUR
3667,72 EUR

Product information for ABB 2CDG110060R0011:

The DSM/S 1.1 diagnostic and protection module from ABB is a specific component for KNX installations, designed for monitoring and protection functions of the bus system. It enables visual and electrical monitoring of the bus status, with the telegram traffic displayed via an LED. This display serves as a quick diagnostic aid to check the operating status of the KNX bus. Additionally, the module is equipped with a changeover contact that activates in the event of a bus failure – that is, when the bus voltage drops below the minimum value Umin. This allows integration into monitoring or alarm systems to detect technical faults early.

Applications

The DSM/S 1.1 is used in KNX installations, particularly in buildings with automated systems for lighting, blinds, heating, or alarm systems. It is suitable for installations where reliable bus monitoring and protection functions are required to prevent disruptions caused by voltage spikes or bus failures. The application typically occurs in the distributor or enclosure area, where the module is integrated into the KNX installation.

Functions and Equipment in Detail

The module features an LED display that visually indicates the telegram traffic on the KNX bus. This facilitates the diagnosis of bus problems, as a missing or irregular blinking pattern indicates disturbances. The integrated changeover contact enables electrical signaling of a bus failure, allowing external devices or systems to be informed of the status. The function of the changeover contact is independent of the LED display and can be used for external alarm or monitoring systems.

Technology Explained Simply

The DSM/S 1.1 contains a suppressor diode that suppresses short-term overvoltages and transient voltage spikes on the KNX bus. This diode protects connected devices from transient voltage spikes caused by lightning strikes, power grid disturbances, or other electrical interferences. The protection function is passive and requires no additional power supply. The LED display also operates without external power, as it is directly powered by the bus. The protection function and the diagnostic function operate independently, making the module suitable for both fault detection and bus system protection.

Compatibility and Accessories

The module is designed for use in KNX installations and is compatible with all devices supporting the KNX standard. It is integrated into the KNX bus line and requires no special software or additional configuration. Connection is made via standardized KNX terminal clamps. There are no specific accessories associated with this module; installation is carried out directly into the existing KNX infrastructure.

Mounting and Installation

Mounting is performed in a suitable enclosure or distributor box. The module is connected via the KNX bus line, with terminal clamps provided for the bus lines (Bus+ and Bus–). The changeover contact is connected to the corresponding terminal clamps for external signaling. Installation does not require special tools, but proper wiring according to applicable standards is mandatory. Positioning is typically done near the bus distribution to ensure optimal monitoring.

Advantages in Operation

The DSM/S 1.1 offers a reliable and simple way to monitor the status of the KNX bus. The LED display enables quick visual diagnosis, while the changeover contact allows electrical signaling of bus failures. The integrated suppressor diode protects connected devices from transient voltage spikes, increasing the lifespan of the installation. The combination of diagnostic and protection functions in a single module reduces the number of required components and simplifies installation and maintenance.

KNX is an open standard for building automation that enables communication between various devices. Diagnostic and protection module describes the product's function, serving both monitoring and protection of the bus system. Suppressor diode is the technical term for the component that suppresses voltage spikes. LED display serves for visual representation of telegram traffic. Changeover contact enables electrical signaling of a bus failure. Bus failure refers to the condition where the bus voltage drops below the minimum value.

General
Product seriesKNX
FunctionDiagnosis and protection
IndicationLED
Protection functionSuppressor diode
Bus failure detectionwhen U < Umin


Questions & answers

What is the delivery time of ABB 2CDG110060R0011 Diagnosis and protection module DSM/S 1.1?

The article ABB 2CDG110060R0011 Diagnosis and protection module DSM/S 1.1 is currently in stock

According to our experience the article is ready for dispatch within 3 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of ABB 2CDG110060R0011 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you ABB 2CDG110060R0011 Diagnosis and protection module DSM/S 1.1 always at the best possible price. We can give you a discount of 2% on ABB 2CDG110060R0011 Diagnosis and protection module DSM/S 1.1 if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 6 pieces of ABB 2CDG110060R0011 Diagnosis and protection module DSM/S 1.1 we can offer you a price of 74,64 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x ABB 2CDG110060R0011 DSM/S 1.1 Diagnostic Module
ABB 2CDG110060R0011 Diagnosis and protection module DSM/S 1.1
76,95 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: ABB 2CDG110060R0011 DSM/S 1.1 Diagnostic Module
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
6 + 4 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.