Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

SAGAB VS 3 multi function tester - Voltage testers with test socket

Your rating:
Average rating
product review for SAGAB VS 3 multi function tester - Voltage testers with test socket
( 0 / 5 ) 0 ratings
376,20 EUR
( 447,68 EUR incl. VAT )
≈ £314.88  |  ≈ $413.44
plus delivery charges: 55,00 €
On order · Delivery time approx. 20 workdaysinfo_outline
1x SAGAB VS 3 multi function tester - Voltage testers with test socket
Lieske Part No.:922034
Mfg Part No: 6398402233
UPC/EAN: 5706445240098
Weight:0.5 kg

Product information for 6398402233:

This item is a non-contact voltage tester with integrated socket tester, RCD tripping, phase indication, and fuse search function. It consists of two components: a transmitter and a receiver, which communicate wirelessly. The device is designed for use by qualified electricians to safely and efficiently inspect electrical installations. The transmitter is connected to the line under test and sends signals that are received and displayed on an illuminated LCD screen (128 x 64 pixels) on the receiver. The radio frequency is 869.525 MHz, with a maximum wireless range of approximately 1.2 km. The transmitter's measurement category is CAT II / 300 V according to IEC/EN 61010-1, while the receiver has the higher category CAT III / 600 V, making it suitable for more complex applications in electrical engineering.

Applications
This voltage tester is suitable for inspecting electrical installations in residential and commercial buildings. It enables checking of voltage, frequency, and phase relationship to detect unbalanced load distribution. The fuse search function helps quickly locate defective or missing fuses in switchboards. The integrated socket tester checks the correct connection sequence (L, N, PE) and detects faults in the protective earth conductor (PE). The RCD test function allows testing of residual current devices, displaying the tripping time to confirm functionality.

Functions and Equipment in Detail
The transmitter is rated for a nominal voltage of 70 to 400 V AC and operates in the frequency range of 40 to 65 Hz. It does not have its own display but transmits measured values wirelessly to the receiver. The receiver displays voltage, frequency, and phase relationship, with phase indication helping to identify wire assignments in multi-phase systems. Fuse search is performed via the transmitter, which injects a signal into the network that is received by the receiver if the fuse is intact. The socket test function detects incorrect connections, such as swapped wires or missing protective earth conductor.

Technology Explained Simply
Wireless communication between transmitter and receiver occurs at 869.525 MHz, providing sufficient range for use within buildings. The CAT III / 600 V measurement category of the receiver ensures a high safety standard when measuring in electrical installations under higher voltage. Both devices are powered by two 1.5-V batteries each (IEC LR6, AA). The receiver's display is illuminated, improving readability in poorly lit environments. The maximum wireless range of approximately 1.2 km is sufficient for indoor use, as signals are attenuated by walls and materials in buildings.

Compatibility and Accessories
The device is designed for use in electrical installations according to IEC/EN 61010-1. The functions are focused on testing voltage, frequency, phase relationship, sockets, and residual current devices. Fuse search is an independent mode activated via the transmitter.

Mounting and Installation
The transmitter is connected directly to the line under test, with the connection method varying depending on the test objective (e.g., to a socket, switch, or wire). The receiver is positioned near the test object to receive signals. The devices are compact and lightweight (transmitter approx. 200 g, receiver approx. 210 g), allowing use in elevated or hard-to-reach areas. Operation is via buttons on the receiver, which activate the various test functions.

Operational Advantages
The non-contact operation increases user safety, as no direct contact with conductive parts is required. The combination of transmitter and receiver allows flexible use, e.g., when testing switchboards, where the transmitter remains inside the cabinet and the receiver is held outside. Displaying the tripping time during RCD testing enables precise evaluation of circuit breaker performance. Phase indication assists in planning and optimizing load distribution in multi-phase systems. Fuse search reduces troubleshooting time in complex switchgear installations.

Note: Batteries are not included in the delivery scope.

General
Nominal voltage70…400 V AC
Frequency range40…65 Hz
Measurement circuit category transmitterCAT II / 300 V
Measurement circuit category receiverCAT III / 600 V
Radio frequency869,525 MHz
Max. radio range1,2 km
Receiver displayLCD 128 x 64, backlit
Supply2 x 1.5V batteries IEC LR6, AA


Questions & answers

What is the delivery time of SAGAB VS 3 multi function tester - Voltage testers with test socket?

The article SAGAB VS 3 multi function tester - Voltage testers with test socket is currently not in stock but has been backordered.

According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of 6398402233 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you SAGAB VS 3 multi function tester - Voltage testers with test socket always at the best possible price. We can give you a discount of 2% on SAGAB VS 3 multi function tester - Voltage testers with test socket if you choose payment in advance on ordering.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x 6398402233
SAGAB VS 3 multi function tester - Voltage testers with test socket
376,20 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: 6398402233
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
7 + 9 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.