6398402233, EAN: 5706445240098

6398402233

Measurement > Voltage Measurement

6398402233

Lieske Part No. 922034
Mfg Part No 6398402233
EAN-Code 5706445240098
Manufacturer
Here only 376,20 EUR
447,68 EUR incl. VAT

Further information for 6398402233

General
Nominal voltage70…400 V AC
Frequency range40…65 Hz
Measurement circuit category transmitterCAT II / 300 V
Measurement circuit category receiverCAT III / 600 V
Radio frequency869,525 MHz
Max. radio range1,2 km
Receiver displayLCD 128 x 64, backlit
Supply2 x 1.5V batteries IEC LR6, AA
This item is a non-contact voltage tester with integrated socket tester, RCD tripping, phase indication, and fuse search function. It consists of two components: a transmitter and a receiver, which communicate wirelessly. The device is designed for use by qualified electricians to safely and efficiently inspect electrical installations. The transmitter is connected to the line under test and sends signals that are received and displayed on an illuminated LCD screen (128 x 64 pixels) on the receiver. The radio frequency is 869.525 MHz, with a maximum wireless range of approximately 1.2 km. The transmitter's measurement category is CAT II / 300 V according to IEC/EN 61010-1, while the receiver has the higher category CAT III / 600 V, making it suitable for more complex applications in electrical engineering.

Applications
This voltage tester is suitable for inspecting electrical installations in residential and commercial buildings. It enables checking of voltage, frequency, and phase relationship to detect unbalanced load distribution. The fuse search function helps quickly locate defective or missing fuses in switchboards. The integrated socket tester checks the correct connection sequence (L, N, PE) and detects faults in the protective earth conductor (PE). The RCD test function allows testing of residual current devices, displaying the tripping time to confirm functionality.

Functions and Equipment in Detail
The transmitter is rated for a nominal voltage of 70 to 400 V AC and operates in the frequency range of 40 to 65 Hz. It does not have its own display but transmits measured values wirelessly to the receiver. The receiver displays voltage, frequency, and phase relationship, with phase indication helping to identify wire assignments in multi-phase systems. Fuse search is performed via the transmitter, which injects a signal into the network that is received by the receiver if the fuse is intact. The socket test function detects incorrect connections, such as swapped wires or missing protective earth conductor.

Technology Explained Simply
Wireless communication between transmitter and receiver occurs at 869.525 MHz, providing sufficient range for use within buildings. The CAT III / 600 V measurement category of the receiver ensures a high safety standard when measuring in electrical installations under higher voltage. Both devices are powered by two 1.5-V batteries each (IEC LR6, AA). The receiver's display is illuminated, improving readability in poorly lit environments. The maximum wireless range of approximately 1.2 km is sufficient for indoor use, as signals are attenuated by walls and materials in buildings.

Compatibility and Accessories
The device is designed for use in electrical installations according to IEC/EN 61010-1. The functions are focused on testing voltage, frequency, phase relationship, sockets, and residual current devices. Fuse search is an independent mode activated via the transmitter.

Mounting and Installation
The transmitter is connected directly to the line under test, with the connection method varying depending on the test objective (e.g., to a socket, switch, or wire). The receiver is positioned near the test object to receive signals. The devices are compact and lightweight (transmitter approx. 200 g, receiver approx. 210 g), allowing use in elevated or hard-to-reach areas. Operation is via buttons on the receiver, which activate the various test functions.

Operational Advantages
The non-contact operation increases user safety, as no direct contact with conductive parts is required. The combination of transmitter and receiver allows flexible use, e.g., when testing switchboards, where the transmitter remains inside the cabinet and the receiver is held outside. Displaying the tripping time during RCD testing enables precise evaluation of circuit breaker performance. Phase indication assists in planning and optimizing load distribution in multi-phase systems. Fuse search reduces troubleshooting time in complex switchgear installations.

Note: Batteries are not included in the delivery scope.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/922034
qrcode für 6398402233