Installation Material from Weidmüller

End plate

Type: APMCZ1.5
Quantity: 1 unit.
Sales unit: 50 pieces
Lieske Part No.: 285606

Isolation amplifier for recording electrical and physical quantities. With galvanic isolation, universally applicable.
Sales unit: 10 pieces
Lieske Part No.: 576592

Device for surge protection in information technology and measurement technology. The device should be installed close to the device to be protected.
Sales unit: 10 pieces
Lieske Part No.: 684453

Device for surge protection in information technology and measurement technology. The device should be installed close to the device to be protected.
Sales unit: 10 pieces
Lieske Part No.: 617991

Transfer module as interface with terminals and connectors.
Lieske Part No.: 369609

Transfer module as interface with terminals and connectors.
Lieske Part No.: 859842

Isolation amplifier for recording electrical and physical quantities. With galvanic isolation, universally applicable.
Lieske Part No.: 735471

Isolation amplifier for recording electrical and physical quantities. With galvanic isolation, universally applicable.
Lieske Part No.: 440255

The end bracket guarantees a permanently secure fit on the mounting rail and prevents slipping. The end bracket has marking options for group markers and the option of accommodating test plugs.
Lieske Part No.: 802118

Terminal block with multiple levels for connecting or linking conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity. Space-saving design.
Sales unit: 50 pieces
Lieske Part No.: 969482

Partition for the electrical separation of terminal blocks with adjacent cross connections. The partition is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 50 pieces
Lieske Part No.: 685316

Reihenklemme mit mehreren Ebenen zum Anschließen oder Verbinden von Leitern mit dauerhaft sicherem Kontakt. Gehärteter Stahl hält den mechanischen Kräften stand, Zinn-beschichtetes Kupfer sorgt für beste Leitfähigkeit. Platzsparende Bauform. Verkaufseinheit: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 493451

Terminal block with multiple levels for connecting or linking conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity. Space-saving design.
Sales unit: 50 pieces
Lieske Part No.: 520242

Terminal block with multiple levels for connecting or linking conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity. Space-saving design.
Sales unit: 50 pieces
Lieske Part No.: 814162

Terminal block with multiple levels for connecting or linking conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity. Space-saving design.
Sales unit: 50 pieces
Lieske Part No.: 485123

Terminal block for isolating circuits during testing or measurements.
Sales unit: 50 pieces
Lieske Part No.: 866565

Terminal block for isolating circuits during testing or measurements.
Sales unit: 100 pieces
Lieske Part No.: 675687

Terminal block for isolating circuits during testing or measurements.
Sales unit: 100 pieces
Lieske Part No.: 876286

Terminal block for isolating circuits during testing or measurements.
Sales unit: 50 pieces
Lieske Part No.: 866516

Terminal block for isolating circuits during testing or measurements.
Sales unit: 50 pieces
Lieske Part No.: 245446

Terminal block for isolating circuits during testing or measurements.
Sales unit: 50 pieces
Lieske Part No.: 866518

Terminal block for isolating circuits during testing or measurements.
Sales unit: 10 pieces
Lieske Part No.: 111914

Terminal block for isolating circuits during testing or measurements.
Sales unit: 10 pieces
Lieske Part No.: 315176

4032248813759
Sales unit: 1 piece
Lieske Part No.: 464285

Cross connectors for feed-through terminal blocks for potential distribution or for forwarding signals.
Sales unit: 5 pieces
Lieske Part No.: 275529

Cross connectors for feed-through terminal blocks for potential distribution or for forwarding signals.
Sales unit: 5 pieces
Lieske Part No.: 895665

Pre-assembled sensor-actuator cable for connecting sensors or actuators and for data transmission. The connectors are molded and tested.
Lieske Part No.: 1876854

Cross connectors for feed-through terminal blocks for potential distribution or for forwarding signals.
Sales unit: 100 pieces
Lieske Part No.: 777983

Cross connectors for feed-through terminal blocks for potential distribution or for forwarding signals.
Sales unit: 100 pieces
Lieske Part No.: 777984

Cross connectors for feed-through terminal blocks for potential distribution or for forwarding signals.
Sales unit: 50 pieces
Lieske Part No.: 1980154

Connecting sleeve to improve the contact between accessories and busbar.
Sales unit: 100 pieces
Lieske Part No.: 868419

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 25 pieces
Lieske Part No.: 905423

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Sales unit: 25 pieces
Lieske Part No.: 783057

End plate for contact protection on live parts of terminal blocks. The end plate is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 10 pieces
Lieske Part No.: 884687

Connecting sleeve to improve the contact between accessories and busbar.
Sales unit: 50 pieces
Lieske Part No.: 1980171

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity. With removable carrier for a fuse insert.
Sales unit: 50 pieces
Lieske Part No.: 807864

End plate for contact protection on live parts of terminal blocks. The end plate is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 20 pieces
Lieske Part No.: 311488

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity. With removable carrier for a fuse insert.
Sales unit: 20 pieces
Lieske Part No.: 252419

End plate for contact protection on live parts of terminal blocks. The end plate is also used for the optically recognizable separation of circuits in order to avoid wiring errors.
Sales unit: 20 pieces
Lieske Part No.: 237479

Mounting foot for attaching the housing to the wall. The feet are first screwed onto the housing and then the housing is attached to the wall.
Lieske Part No.: 348070

Mounting foot for attaching the housing to the wall. The feet are first screwed onto the housing and then the housing is attached to the wall.
Lieske Part No.: 348067

Terminal Type W / Screw Feed-through terminals WDU, beige bus bar of copper, tin-plated, beige.Terminal width: 2, 5 mm diameter flexible cable:
, -7 square-mm-diameter solid:
-
6 sq mm Type: WDU7 N/35 item:
ST.
Lieske Part No.: 707291

Terminal block for connecting or linking protective conductors to the mounting base (earth). Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Lieske Part No.: 721202

Terminal block for isolating circuits during testing or measurements.
Sales unit: 10 pieces
Lieske Part No.: 280672

Cross connectors for feed-through terminal blocks for potential distribution or for forwarding signals.
Sales unit: 5 pieces
Lieske Part No.: 413637

Cross connectors for feed-through terminal blocks for potential distribution or for forwarding signals.
Sales unit: 5 pieces
Lieske Part No.: 559045

Markers for labeling terminals. The markers can be labeled with a printer or plotter and appropriate software.
Sales unit: 10 pieces
Lieske Part No.: 620779

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity.
Lieske Part No.: 860975

Cross connectors for feed-through terminal blocks for potential distribution or for forwarding signals.
Sales unit: 5 pieces
Lieske Part No.: 598748

Terminal block for connecting or joining conductors with a permanently secure contact. Hardened steel withstands mechanical forces, tin-coated copper ensures the best conductivity. With removable carrier for a fuse insert.
Sales unit: 50 pieces
Lieske Part No.: 1232403