Installation Material from WAGO

2-conductor disconnect and measuring terminal with pivoting disconnect blade disconnect blade holder orange with test opening for test plugs Ø 2 mm and Ø 2.3 mm orange
Sales unit: 100 pieces
Lieske Part No.: 961323

2-conductor isolating and measuring terminal, with shield conductor rail, with test opening, for test plugs Ø 2 mm and Ø 3 mm, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², orange
Sales unit: 50 pieces
Lieske Part No.: 1962881

4-conductor disconnect and measuring terminal, with pivoting disconnect blade, with test opening, for test plugs Ø 2 mm and Ø 3 mm, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 802010

4-conductor isolating and measuring terminal, with shield conductor rail, with test opening, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 822476

4-conductor disconnect and measuring terminal with pivoting disconnect blade disconnect blade holder orange with test opening for test plug Ø 2 mm and Ø 2.3 mm orange
Sales unit: 50 pieces
Lieske Part No.: 1962882

4-conductor isolating and measuring terminal, with shield conductor rail, with test opening, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², orange
Sales unit: 50 pieces
Lieske Part No.: 589513

4-wire isolating and measuring terminal with pivoting isolating blade isolating blade holder orange with test opening for test plugs Ø 2 mm and Ø 2.3 mm suitable for Ex i applications blue
Sales unit: 50 pieces
Lieske Part No.: 1962883

Three-level terminal, with additional cross-bridging on the ground floor, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey/grey/grey
Sales unit: 50 pieces
Lieske Part No.: 1262459

Double-deck terminal, with additional cross-bridging on the ground floor, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey/grey
Sales unit: 50 pieces
Lieske Part No.: 1965181

2-wire front wiring, through terminals
(Center marking)
Cross section / mm ² 0.08 - 2.5
Color: gray
Width: 5 mm

Type: 280-901
Quantity: 1 unit.
Lieske Part No.: 206066

2-conductor feed-through terminal, 2.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 2.50 mm², orange
Sales unit: 100 pieces
Lieske Part No.: 590461

Contour-matched spacer housing suitable for 2-wire terminals horizontal design orange
Sales unit: 25 pieces
Lieske Part No.: 889124

2-conductor feed-through terminal, 2.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 2.50 mm², red
Sales unit: 100 pieces
Lieske Part No.: 717062

2-wire front wiring, through terminals
(Center marking)
Cross section / mm ² 0.08 - 2.5
Color: blue
Width: 5 mm

Type: 280-904
Quantity: 1 unit.
Lieske Part No.: 276450

2-conductor feed-through terminal, 2.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 2.50 mm², black
Sales unit: 100 pieces
Lieske Part No.: 484791

2-conductor feed-through terminal, 2.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 2.50 mm², yellow
Sales unit: 100 pieces
Lieske Part No.: 825473

2-wire front wiring, earthing terminals
(Center marking)
Conductor cross section: 0.08 - 2.5 mm ²
color: green yellow
Width: 5 mm

Type: 280-907
Quantity: 1 unit.
Lieske Part No.: 686312

2-wire protective conductor terminal suitable for Ex e II applications green-yellow
Sales unit: 100 pieces
Lieske Part No.: 150411

2-conductor disconnect terminal, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 715691

2-conductor disconnect terminal, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², orange
Sales unit: 50 pieces
Lieske Part No.: 1261492

2-conductor disconnect terminal, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², blue
Sales unit: 50 pieces
Lieske Part No.: 1964392

2-wire diode terminal with diode 1N4007 grey
Lieske Part No.: 293162

2-wire diode terminal with diode 1N4007 grey
Sales unit: 100 pieces
Lieske Part No.: 156182

2-conductor base terminal, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 447043

Component terminal, double-deck, with diode 1N4007, anode below, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1231955

Component terminal, double-deck, with diode 1N4007, anode at the top, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1962884

Component terminal, double-deck, with 2 diodes 1N4007, anodes below, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1962885

Component terminal, double-deck, with 2 diodes 1N4007, anodes at the top, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1962886

Component terminal, double-deck, with 2 diodes 1N4007, anode top, anode right, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1962887

Component terminal, double-deck, with 2 diodes 1N4007, anode top, anode left, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1962888

Component terminal, double-deck, with 2 diodes 1N4007, anodes below, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1962889

Double-deck diode terminal with 2 diodes 1N4007 grey
Sales unit: 50 pieces
Lieske Part No.: 429382

Component terminal, double-deck, LED red, DC 24 V, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1962890

Component terminal, double-deck, LED red, DC 24 V, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1962891

Component terminal, double-deck, with end plate, with transil diode 1.5KE33C, DC 24 V, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Lieske Part No.: 1941269

Component terminal, double-deck, with end plate, with transil diode 1.5KE62C, DC 48 V, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Lieske Part No.: 1941270

Component terminal, double-deck, with end plate, with transil diode 1.5KE82C, DC 60 V, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Lieske Part No.: 1941271

Component terminal, double-deck, with end plate, with transil diode 1.5KE150C, DC 110 V, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Lieske Part No.: 1949393

Component terminal, double-deck, with end plate, with transil diode 1.5KE39CA, AC 24 V, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Lieske Part No.: 1941272

Component terminal, double-deck, with end plate, with transil diode 1.5KE-C, AC 115 V, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Lieske Part No.: 1941273

Component terminal, double-deck, with end plate, with transil diode 1.5KE-C, AC 230 V, for mounting rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®, 2.50 mm², grey
Lieske Part No.: 1941274

4-conductor feed-through terminal, 2.5 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 2.50 mm², orange
Sales unit: 100 pieces
Lieske Part No.: 1963981

Double feed-through terminal, 2.5 mm², suitable for Ex e II applications, side label holders, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 2.50 mm², light grey
Sales unit: 100 pieces
Lieske Part No.: 1963715

4-conductor feed-through terminal, 2.5 mm², suitable for Ex e II applications, side label holders, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 2.50 mm², light grey
Sales unit: 100 pieces
Lieske Part No.: 1963716

2-wire feed-through terminal Ex e II suitable for Ex e II applications light grey
Sales unit: 100 pieces
Lieske Part No.: 837490

3-wire feed-through terminal Ex e II suitable for Ex e II applications light grey
Sales unit: 100 pieces
Lieske Part No.: 1963717

4-conductor feed-through terminal, 2.5 mm², suitable for Ex e II applications, center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 2.50 mm², light gray
Sales unit: 100 pieces
Lieske Part No.: 1232348

Double feed-through terminal, 2.5 mm², suitable for Ex e II applications, with double, central label holder, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 2.50 mm², light grey
Sales unit: 100 pieces
Lieske Part No.: 1963718

4-conductor feed-through terminal, 2.5 mm², suitable for Ex e II applications, center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 2.50 mm², light gray
Sales unit: 100 pieces
Lieske Part No.: 1963719

3-wire feed-through terminal Ex e II suitable for Ex e II applications light grey
Sales unit: 100 pieces
Lieske Part No.: 624349