WAGO 787-722 Primary switch protection Power., ECO Power output voltage 24VDC 5A
|
219,45 EUR |
|||||||||||
|
( 261,15 EUR incl. VAT ) ≈ £188.73 | ≈ $250.17 plus delivery charges: 53,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline | |||||||||||
| In Stock: >10 pieces | |||||||||||
| Lieske Part No.: | 933579 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | 787-722 | ||||||||||
| UPC/EAN: | 4045454908188 | ||||||||||
| Weight: | 0.868 kg | ||||||||||
|
Graduated prices net
|
|||||||||||
Further Power Supply Unit from WAGOFurther products in category Power Supply Unit
All products of WAGO
Product information for WAGO 787-722:
WAGO Primary Switch Mode Power Supplies ECO output voltage DC 24 V 5 A no-load and short-circuit protected adjustable output voltage LED status display for TS 35 CAGE CLAMP® connection
General technical data:
Nominal input voltage Vin rated 230 V AC
input voltage range AC 85 V ... 264 V (with derating 0.8% / V (<110 V))
frequency 47 Hz ... 63 Hz
input current Ie 1.6 A typ. at 230 V AC
inrush current <30 Ap
Mains buffering
output voltage range DC 22 V ... 28 V adjustable
output current Ia 5 A at 24 V DC
Ripple <100 mVpp to 20 MHz
derating -2.67% / K (> 40 ° C)
deviation max. 1 %
Current limitation in the range 1.15 .. 1.4 x Ia
Efficiency typ. 82%
Test voltage pri. - PE 1.5 kV
test voltage Pri. - Sec 3 kV.
Test Voltage sec. - PE 0.5 kV
Protection IP 20
Operating display LED green (24 V DC OK) LED red (overload)
Mounting DIN rail mounting (DIN EN 50022)
Ambient temperature -10 ° C ... +70 ° C
Storage temperature -25 ° C ... +85 ° C
Standards / regulations EN 60950, EN 61000-6-2, EN 61000-6-3
Dimensions Height [mm] 92 mm Width [mm] 75 mm Depth [mm] 136 mm
Type: 787-722 Quantity: 1 ST.
Type: 787-722
General technical data:
Nominal input voltage Vin rated 230 V AC
input voltage range AC 85 V ... 264 V (with derating 0.8% / V (<110 V))
frequency 47 Hz ... 63 Hz
input current Ie 1.6 A typ. at 230 V AC
inrush current <30 Ap
Mains buffering
20 ms at 230 V AC
Nominal output voltage Vout DC 24 Voutput voltage range DC 22 V ... 28 V adjustable
output current Ia 5 A at 24 V DC
Ripple <100 mVpp to 20 MHz
derating -2.67% / K (> 40 ° C)
deviation max. 1 %
Current limitation in the range 1.15 .. 1.4 x Ia
Efficiency typ. 82%
Test voltage pri. - PE 1.5 kV
test voltage Pri. - Sec 3 kV.
Test Voltage sec. - PE 0.5 kV
Protection IP 20
Operating display LED green (24 V DC OK) LED red (overload)
Mounting DIN rail mounting (DIN EN 50022)
Ambient temperature -10 ° C ... +70 ° C
Storage temperature -25 ° C ... +85 ° C
Standards / regulations EN 60950, EN 61000-6-2, EN 61000-6-3
Dimensions Height [mm] 92 mm Width [mm] 75 mm Depth [mm] 136 mm
Type: 787-722 Quantity: 1 ST.
Type: 787-722
Questions & answers
What is the delivery time of WAGO 787-722 Primary switch protection Power., ECO Power output voltage 24VDC 5A?
The article WAGO 787-722 Primary switch protection Power., ECO Power output voltage 24VDC 5A is currently in stock
According to our experience the article is ready for dispatch within 5 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of WAGO 787-722 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you WAGO 787-722 Primary switch protection Power., ECO Power output voltage 24VDC 5A always at the best possible price. We can give you a discount of 2% on WAGO 787-722 Primary switch protection Power., ECO Power output voltage 24VDC 5A if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of WAGO 787-722 Primary switch protection Power., ECO Power output voltage 24VDC 5A we can offer you a price of 204,64 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
Fitting accessory for WAGO 787-722 Primary switch protection Power., ECO Power output voltage 24VDC 5A
 |
WAGO 216-241 ferrule sleeve for 0.5 mm² / AWG 22 m.Kunststoffkragen galv.verz.
Wire end ferrule, sleeve for 0.5 mm² / AWG 20, with plastic collar, galvanically tinned, electrolytic copper, gas-tight crimped, according to DIN 46228, part 4/09.90, white Lieske Part No.: 104869 Mfg Part No: 216-241 |
66,50 EUR 69,30 EUR
 ≈ £57.19 | ≈ $75.81
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 216-243 ferrule sleeve for 1 mm² / AWG 18 galv.verz m.Kunststoffkragen.
Wire end ferrule, sleeve for 1 mm² / AWG 18, with plastic collar, galvanically tinned, electrolytic copper, gas-tight crimped, according to DIN 46228, part 4/09.90, red Lieske Part No.: 104870 Mfg Part No: 216-243 |
68,40 EUR
≈ £58.82 | ≈ $77.98
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 216-262 ferrule sleeve for 0.75 mm² / AWG 20 galv.verz m.Kunststoffkragen.
Wire end ferrule, sleeve for 0.75 mm² / AWG 18, with plastic collar, galvanically tinned, electrolytic copper, gas-tight crimped, according to DIN 46228, part 4/09.90, grey Lieske Part No.: 104903 Mfg Part No: 216-262 |
66,50 EUR 69,30 EUR
≈ £57.19 | ≈ $75.81
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 248-501/000-023 248-501 / 000-023 Quick marking, System Mini-WSB green
Mini WSB quick labelling system unprinted label width 5 mm 10 strips with 10 labels per card green Lieske Part No.: 104969 Mfg Part No: 248-501/000-023 |
20,28 EUR 20,39 EUR
≈ £17.44 | ≈ $23.12
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 248-501/000-024 248-501 / 000-024 Miniature WSB of the Quick, drawing violet system
Mini WSB label card, as card, non-stretchable, unprinted, snap-on, violet Lieske Part No.: 104970 Mfg Part No: 248-501/000-024 |
20,28 EUR 20,39 EUR
≈ £17.44 | ≈ $23.12
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 216-103 wire end sleeve for 1qmm/AWG 18 without plastic. Collar galvanically tinned
Wire end ferrule, sleeve for 1 mm² / AWG 18, without plastic collar, galvanically tinned Lieske Part No.: 179522 Mfg Part No: 216-103 |
10,45 EUR 10,89 EUR
≈ £8.99 | ≈ $11.91
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 216-201 wire end sleeve for 0.5qmm/AWG 22/plastic. Collar galvanically tinned
Wire end ferrule for 0.5 qmm / AWG 22 with plastic collar galvanically tinned white Lieske Part No.: 182446 Mfg Part No: 216-201 |
45,60 EUR
≈ £39.22 | ≈ $51.98
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 210-196 aluminum rail 35x7, 5 mm , unslotted L = 2 m, 1.5 mm thick
Aluminium support rail 35 x 8.2 mm 1.6 mm thick 2 m long unperforated according to EN 60715 Aluminium, metallic bright Lieske Part No.: 183023 Mfg Part No: 210-196 |
22,59 EUR 22,72 EUR
≈ £19.43 | ≈ $25.75
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 248-501/000-002 50005630 Miniature WSB title, yellow blank for 2-wire
Mini WSB label card, as card, non-stretchable, unprinted, snap-on, yellow Lieske Part No.: 222437 Mfg Part No: 248-501/000-002 |
20,28 EUR 20,39 EUR
≈ £17.44 | ≈ $23.12
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 216-244 wire end ferrule sleeve for 1.5 with plastic collar, galvanically tinned
Aderendhülse, Hülse für 1,5 mm² / AWG 16, mit Kunststoffkragen, galvanisch verzinnt, Elektrolytkupfer, gasdicht aufgecrimpt, gemäß DIN 46228, Teil 4/09.90, schwarz Lieske Part No.: 243846 Mfg Part No: 216-244 |
68,40 EUR
≈ £58.82 | ≈ $77.98
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 248-501/000-006 name, Miniature WSB blue blank for 2-wire
Mini WSB quick labelling system unprinted label width 5 mm 10 strips with 10 labels per card blue Lieske Part No.: 290620 Mfg Part No: 248-501/000-006 |
20,28 EUR 20,39 EUR
≈ £17.44 | ≈ $23.12
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 210-113 steel mounting rail 35x7,5mm, 1mm thick 2m ungel. Galvanized CR / 6 free
Steel support rail 35 x 7.5 mm 1 mm thick 2 m long unperforated according to EN 60715 bluish, galvanized, chromated, CR3 Lieske Part No.: 298797 Mfg Part No: 210-113 |
12,52 EUR 12,59 EUR
≈ £10.77 | ≈ $14.27
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 216-301 wire end sleeve for 0.25qmm/AWG 24/plastic. Collar galvanically tinned
Wire end ferrule for 0.25 qmm / AWG 24 with plastic collar galvanically tinned yellow Lieske Part No.: 323384 Mfg Part No: 216-301 |
45,60 EUR
≈ £39.22 | ≈ $51.98
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
ST Wago rail 35x7, 5mm 210-112, perforated length 2m
Mounting rail TS 35 x 7.5 mm, perforated, 2m Type: 210-112 Quantity: 1 unit. Lieske Part No.: 348496 Mfg Part No: 210-112 |
12,69 EUR 12,77 EUR
≈ £10.91 | ≈ $14.47
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
WAGO 248-501/000-012 WSB Mini-Schnellb. 248-501 / 000-012, orange unprinted for 2-wire
Mini WSB label card, as card, non-stretchable, unprinted, snap-on, orange Lieske Part No.: 398280 Mfg Part No: 248-501/000-012 |
20,28 EUR 20,39 EUR
≈ £17.44 | ≈ $23.12
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 210-197 steel support rail 35x15mm 1.5mm thick 2 m gel galvanized CR/6-free
Steel support rail 35 x 15 mm 1.5 mm thick 2 m long perforated similar to EN 60715 bluish, galvanized, chromated, CR3 Lieske Part No.: 412093 Mfg Part No: 210-197 |
20,76 EUR 20,88 EUR
≈ £17.85 | ≈ $23.67
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
WAGO 248-501/000-005 WSB Mini-Schnellb. 248-501 / 000-005, red for 2-wire unprinted
Mini WSB quick labelling system unprinted label width 5 mm 10 strips with 10 labels per card red Lieske Part No.: 457430 Mfg Part No: 248-501/000-005 |
20,28 EUR 20,39 EUR
≈ £17.44 | ≈ $23.12
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 2009-145 Miniature WSB Inline 5-5,2mm, 1700S. Know
Mini-WSB Inline unprinted 1,700 WMB signs (5 mm) on roll stretchable 5 - 5.2 mm white Lieske Part No.: 467714 Mfg Part No: 2009-145 |
66,82 EUR 67,22 EUR
≈ £57.47 | ≈ $76.17
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 210-115 steel support rail 35x7.5mm 1mm thick 2m perforated galvanized CR/6-free
Steel support rail 35 x 7.5 mm 1 mm thick 2 m long perforated according to EN 60715 hole width 18 mm, hole spacing 25 mm galvanized CR. 6-free Lieske Part No.: 483406 Mfg Part No: 210-115 |
13,16 EUR 13,24 EUR
≈ £11.32 | ≈ $15.00
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 216-221 wire end sleeve for 0.5qmm/AWG 22/plastic. Collar galvanically tinned
Wire end ferrule for 0.5 qmm / AWG 22 with plastic collar galvanically tinned white Lieske Part No.: 500797 Mfg Part No: 216-221 |
45,60 EUR
≈ £39.22 | ≈ $51.98
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 216-322 wire end sleeve for 0.35qmm/AWG 24/plastic. Collar galvanically tinned
Wire end ferrule for 0.35 qmm / AWG 24 with plastic collar galvanically tinned green Lieske Part No.: 507811 Mfg Part No: 216-322 |
45,60 EUR
≈ £39.22 | ≈ $51.98
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 216-222 wire end sleeve for 0.75qmm/AWG 20/plastic. Collar galvanically tinned
Wire end ferrule, sleeve for 0.75 mm² / AWG 18, with plastic collar, galvanically tinned, grey Lieske Part No.: 522254 Mfg Part No: 216-222 |
45,60 EUR
≈ £39.22 | ≈ $51.98
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 210-198 Cu-rail 35x15mm , unperforated l = 2m 2.3mm thick
Copper support rail 35 x 15 mm 2.3 mm thick 2 m long unperforated according to EN 60715 Copper, metallically bare Lieske Part No.: 570976 Mfg Part No: 210-198 |
191,90 EUR 193,05 EUR
≈ £165.03 | ≈ $218.77
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 216-284 Aderendhülse für 1,5 mm²/AWG 16 mit Kunststoffkragen galvanisch verzinkt
Aderendhülse, Hülse für 1,5 mm² / AWG 16, mit Kunststoffkragen, galvanisch verzinnt, Elektrolytkupfer, gasdicht aufgecrimpt, gemäß DIN 46228, Teil 4/09.90, schwarz Lieske Part No.: 577239 Mfg Part No: 216-284 |
101,65 EUR 101,97 EUR
≈ £87.42 | ≈ $115.88
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 216-102 wire end ferrule for 0.75mm²/AWG 20 without plastic collar, galvanically tinned
Wire end ferrule, sleeve for 0.75 mm² / AWG 20, without plastic collar, galvanically tinned, silver-coloured Lieske Part No.: 588962 Mfg Part No: 216-102 |
10,45 EUR 10,89 EUR
≈ £8.99 | ≈ $11.91
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 216-264 wire end sleeve for 1.5qmm/AWG 16 with plastic collar, galvanized
Wire end ferrule for 1.5 qmm / AWG 16 with plastic collar galvanically tinned electrolytic copper gas-tight crimped according to DIN 46228, part 4/09.90 black Lieske Part No.: 616890 Mfg Part No: 216-264 |
68,40 EUR
≈ £58.82 | ≈ $77.98
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 216-223 Aderendhülse 1qmm, red AWG 18 with plastic collar
Wire end ferrule, sleeve for 1 mm² / AWG 18, with plastic collar, galvanically tinned, red Lieske Part No.: 705596 Mfg Part No: 216-223 |
45,60 EUR
≈ £39.22 | ≈ $51.98
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 210-720 operating tool type2 3,5 x0, 5mm,
Operating tool with partially insulated shaft type 2, blade (3.5 x 0.5) mm suitable for series 260, 261, 262, 264, 270, 280, 281, 290, 775, 776, 777, 769, 780, 781, 869, 870, 880, 2002, 2003, 2004, ... Lieske Part No.: 726859 Mfg Part No: 210-720 |
6,84 EUR 6,88 EUR
≈ £5.88 | ≈ $7.80
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
B = 6mm 249-116 WAGO terminal clamp for TS 35
Screwless end clamp, 6 mm wide, for mounting rail 35 x 15 and 35 x 7.5, grey Lieske Part No.: 754662 Mfg Part No: 249-116 |
0,71 EUR
≈ £0.61 | ≈ $0.81
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
 |
WAGO 216-104 ferrule sleeve for 1.5 mm² / AWG 16 galv.verz o.Kunststoffkragen.
Wire end ferrule, sleeve for 1.5 mm² / AWG 16, without plastic collar, galvanically tinned, silver-coloured Lieske Part No.: 757883 Mfg Part No: 216-104 |
10,45 EUR 10,89 EUR
≈ £8.99 | ≈ $11.91
Made to order · Delivery time approx. 20 workdaysinfo_outline
|