WAGO 753-667/000-004 electronic unit, safe digital input/output, 4/4 channels
|
426,00 EUR |
|||||||||||
|
( 506,94 EUR incl. VAT ) plus delivery charges |
|||||||||||
| Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline | |||||||||||
| In Stock: >100 pieces | |||||||||||
| Lieske Part No.: | 1991250 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | 753-667/000-004 | ||||||||||
| Weight: | 0.12 kg | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for WAGO 753-667/000-004:
The 75x-667/000-004 module has 4 power outputs (O1 . O4) and 4 clock-sensitive inputs (I1 . I4). The sensors can be fed directly with 24 V or through the 2 differently clocked outputs (T1 . T2). Potential-free, contact-based emergency stop buttons, safety door or operating mode selector switches as well as safe sensors or safe semiconductor outputs (e.g. light barriers, PLC outputs) can be connected to the inputs. The power outputs switch resistive and inductive loads according to DC 13 with a nominal current of up to 2 A without additional external circuitry.
The power outputs can be operated bipolarly (high-side/low-side circuit) or unipolarly (common potential on one side of the load).
Short circuits, cross circuits and 24V external feed are monitored. Monitoring and other safety-relevant parameters such as operating modes or switching off the test pulses, discrepancy times or filter times can be parameterized via WAGO-I/O-CHECK.
The parameterization tool can be easily integrated into engineering systems that support the TCI (Tool Calling Interface) with CC2 or CC3.
Depending on the setting, the parameters are automatically downloaded to the controller via a PROFIsafe-compliant iPar server when the module is replaced. The PROFIsafe address is set on the coding switch on the side or alternatively via WAGO-I/O-CHECK.
The module supports the PROFIsafe protocols V2.4 (PROFIBUS, PROFINET) and V2.6 (PROFINET).
The field and system levels are galvanically isolated from each other.
The arrangement of the individual safe modules is arbitrary during configuration in the fieldbus node.
If necessary (e.g. cable length of the 24V supply greater than 3 m), a WAGO filter module or a suitable external filter must be used for the 24V supply to protect against surge and burst (according to IEC 61000-6-7 and the shipping sector).
Further information can be found in the manual (German and English)!
The 75x-667/000-004 module was evaluated by UL in accordance with the standards UL/CSA 61010-1, UL/CSA 61010-2-201 and UL 121201, CSA-C22.2 No. 213.
The evaluation of functional safety in accordance with the standards mentioned was carried out by TÜV Rheinland.
Type: 753-667/000-004
Questions & answers
What is the delivery time of WAGO 753-667/000-004 electronic unit, safe digital input/output, 4/4 channels?
The article WAGO 753-667/000-004 electronic unit, safe digital input/output, 4/4 channels is currently in stock
According to our experience the article is ready for dispatch within 2 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of WAGO 753-667/000-004 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you WAGO 753-667/000-004 electronic unit, safe digital input/output, 4/4 channels always at the best possible price. We can give you a discount of 2% on WAGO 753-667/000-004 electronic unit, safe digital input/output, 4/4 channels if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduation prizes with every purchase. If you buy a minimum of 4 pieces of WAGO 753-667/000-004 electronic unit, safe digital input/output, 4/4 channels we can offer you a price of 419,61 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.