WAGO 750-530 output terminal 8-channel digital 0.08–2.5 mm² light grey content_copy

The WAGO 750-530 is an 8-channel digital output terminal for industrial automation systems. It is designed for use in control systems where digital signals with a voltage of 24 V DC and a current of up to 0.5 A per channel must be transmitted. The terminal switches positively, meaning that the output carries the positive voltage when the signal is active. It is short-circuit-proof, so a short circuit on one channel does not affect the function of the other channels. The terminal is light grey in colour, allowing it to be visually integrated into standard control enclosures.

Applications
This terminal is suitable for applications in industrial automation, particularly in control systems communicating via bus systems such as Ethernet/IP, PROFINET or other fieldbus protocols. It is commonly used in machine building, manufacturing plants, packaging technology and other areas where digital signals are required to control relays, drives, lamps or other electrical loads. The 8-channel configuration enables the simultaneous control of multiple devices via a single module.

Functions and Features in Detail
The terminal features eight independent outputs, each capable of handling a maximum current of 0.5 A. The operating voltage is 24 V DC, a standard value in industrial electronics. The positive switching configuration is common for most digital output applications, as it enables control of loads via positive potential. The short-circuit-proof design protects the terminal and connected devices from damage due to incorrect connections or short circuits.

Technology Explained Simply
The terminal is designed for use in enclosures and is mounted on a support rail, such as an aluminium or steel support rail. The connection cross-sections range from 0.08 mm² to 2.5 mm², covering a wide range of conductors, including fine copper wires and standard installation cables. The light grey colour is a visual characteristic that makes the terminal recognisable in standard control systems.

Compatibility and Accessories
The terminal is part of the WAGO 750 system and can be combined with other modules from this system to build complex control systems. Suitable accessories include shielded terminal clamps such as the 790-108 or 790-140, which are used for secure fixation of shielded cables. System enclosures such as the 850-826/002-000 or 850-828/002-000 offer IP65 protection and are suitable for use in harsh environments. For labelling the terminals, Mini-WSB labels in various colours are available, such as red, green, orange, purple or yellow, enabling quick identification of functions. Power supply modules such as the 750-601 or 750-602 can be used to supply the required voltage to the terminal.

Mounting and Installation
Mounting is done on a standard support rail, as commonly used in industrial enclosures. The terminal is simply clipped onto the rail and locked in place. The connection terminals are designed for cross-sections from 0.08 to 2.5 mm², with connections made via screw or clamp connections. Wiring is done via the designated connection points, with polarity of the connections to be observed, as the terminal switches positively.

Operational Advantages
The terminal provides reliable and low-maintenance control of up to eight digital loads. The short-circuit-proof design increases safety and prevents system-wide failures in case of a fault on a single channel. The use of standard cross-sections and compatibility with the WAGO 750 system simplify integration into existing installations. The light grey colour supports visual organisation in control enclosures, and the use of labelling systems such as Mini-WSB enables quick identification of functions.

General
Number of channels	8
Operating voltage	24 V DC
Maximum current per channel	0,5 A
Switching type	positive switching
Connection cross section	0,08–2,5 mm²
Colour	Light grey
System compatibility	WAGO 750-System
Short-circuit-proof

---