WAGO 284-402 cross bridge insulated rated current 57 A grey
|
1,04 EUR |
|||||||||||
|
( 1,24 EUR incl. VAT ) ≈ £0.87 | ≈ $1.16 plus delivery charges: 55,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline | |||||||||||
| In Stock: >100 pieces | |||||||||||
| Lieske Part No.: | 179240 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | 284-402 | ||||||||||
| UPC/EAN: | 4044918396363 | ||||||||||
| Weight: | 0.123 kg | ||||||||||
| Type: | 284-402 | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for WAGO 284-402:
The article 284-402 from WAGO is an insulated cross bridge used in connection technology for secure and reliable electrical connection of conductors in terminal blocks. It serves as a bridge between adjacent terminals, enabling parallel current flow without additional wiring. The bridge is gray in color and designed for use in industrial plants and electrical installations where high mechanical and electrical load capacity is required.
Bridge
The bridge is a component for electrical connection of multiple terminals in a row. It is used in terminal block systems to connect multiple connection points, enabling a common power supply or a common grounding point. The insulated design protects against short circuits and increases operational safety.
Insulation
The insulation of the bridge ensures that the electrical connection occurs only at the designated connection points. This prevents unintended contact with adjacent conductors or terminals. The insulation is firmly integrated and provides high protection against electrical hazards, especially in environments with high mechanical stress or limited space.
Cross Bridge
As a cross bridge, the component is designed to be mounted perpendicular to the longitudinal axis of the terminal row. This enables direct connection between two adjacent terminals, simplifying wiring and reducing installation time. The design is compatible with the corresponding terminal blocks in the WAGO product range.
Rated Current and Cross-Section
The bridge is rated for a nominal current of 57 A, making it suitable for medium to high loads in industrial applications. The maximum conductor cross-section is 10 mm², allowing use with thicker cables. These values ensure safe and stable current transmission under load.
Color and Material
The bridge is gray in color, distinguishing it visually from other components and enabling easy identification in the enclosure. The color serves primarily for visual identification and does not affect functionality.
Applications
The bridge is used in electrical installations, automation technology, and industrial control systems. It is particularly useful in enclosures where multiple terminals need to be connected without requiring additional wiring. The insulated design also makes it suitable for applications requiring high electrical safety.
Compatibility and Accessories
The bridge 284-402 is specifically designed for use with terminal blocks in the WAGO product range. It is designed as a cross bridge and fits the standard dimensions of the terminals.
Mounting and Installation
Mounting is done by simply inserting the bridge into the designated connection points of the terminal blocks. No additional tools or mounting aids are required. The connection is mechanically stable and secured by the shape of the bridge and its fit within the terminal. Installation is done without additional wiring, reducing installation time.
Installation follows general guidelines for terminal block systems.
Operational Advantages
The bridge reduces the number of required connecting wires, simplifying installation and reducing error rates. The insulated design increases safety and prevents short circuits. The high current capacity of 57 A and support for 10 mm² conductor cross-section make it suitable for a wide range of industrial applications. The gray color facilitates visual differentiation in the enclosure.
Bridge
The bridge is a component for electrical connection of multiple terminals in a row. It is used in terminal block systems to connect multiple connection points, enabling a common power supply or a common grounding point. The insulated design protects against short circuits and increases operational safety.
Insulation
The insulation of the bridge ensures that the electrical connection occurs only at the designated connection points. This prevents unintended contact with adjacent conductors or terminals. The insulation is firmly integrated and provides high protection against electrical hazards, especially in environments with high mechanical stress or limited space.
Cross Bridge
As a cross bridge, the component is designed to be mounted perpendicular to the longitudinal axis of the terminal row. This enables direct connection between two adjacent terminals, simplifying wiring and reducing installation time. The design is compatible with the corresponding terminal blocks in the WAGO product range.
Rated Current and Cross-Section
The bridge is rated for a nominal current of 57 A, making it suitable for medium to high loads in industrial applications. The maximum conductor cross-section is 10 mm², allowing use with thicker cables. These values ensure safe and stable current transmission under load.
Color and Material
The bridge is gray in color, distinguishing it visually from other components and enabling easy identification in the enclosure. The color serves primarily for visual identification and does not affect functionality.
Applications
The bridge is used in electrical installations, automation technology, and industrial control systems. It is particularly useful in enclosures where multiple terminals need to be connected without requiring additional wiring. The insulated design also makes it suitable for applications requiring high electrical safety.
Compatibility and Accessories
The bridge 284-402 is specifically designed for use with terminal blocks in the WAGO product range. It is designed as a cross bridge and fits the standard dimensions of the terminals.
Mounting and Installation
Mounting is done by simply inserting the bridge into the designated connection points of the terminal blocks. No additional tools or mounting aids are required. The connection is mechanically stable and secured by the shape of the bridge and its fit within the terminal. Installation is done without additional wiring, reducing installation time.
Installation follows general guidelines for terminal block systems.
Operational Advantages
The bridge reduces the number of required connecting wires, simplifying installation and reducing error rates. The insulated design increases safety and prevents short circuits. The high current capacity of 57 A and support for 10 mm² conductor cross-section make it suitable for a wide range of industrial applications. The gray color facilitates visual differentiation in the enclosure.
| General | |
| Bridge | cross bridge |
| Colour | Grey |
| Nominal current | 57 A |
| Conductor cross section | 10 mm² |
| Insulation | |
Questions & answers
What is the delivery time of WAGO 284-402 cross bridge insulated rated current 57 A grey?
The article WAGO 284-402 cross bridge insulated rated current 57 A grey is currently in stock
According to our experience the article is ready for dispatch within 2 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of WAGO 284-402 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you WAGO 284-402 cross bridge insulated rated current 57 A grey always at the best possible price. We can give you a discount of 2% on WAGO 284-402 cross bridge insulated rated current 57 A grey if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 50 pieces of WAGO 284-402 cross bridge insulated rated current 57 A grey we can offer you a price of 1,02 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
This product is recommended as accessory for
 |
WAGO 284-604 2-conductor pass-through terminal 0.2–10 mm² blue
The WAGO 284-604 is a 2-wire passage terminal block from the series 284, designed for use in industrial and building installations. It enables secure and reliable connection of electrical conductors ... Lieske Part No.: 103851 Mfg Part No: 284-604 |
2,80 EUR 2,82 EUR
 ≈ £2.34 | ≈ $3.12
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
WAGO 784-607 2-conductor protective earth terminal 0.2-10(16) mm² green-yellow
The WAGO 784-607 is a 2-conductor protective earth terminal block, specifically designed for use in industrial and electrical installations. It enables secure and reliable connection of protective ... Lieske Part No.: 117318 Mfg Part No: 784-607 |
5,87 EUR 5,96 EUR
≈ £4.91 | ≈ $6.53
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
WAGO 284-101 2-conductor pass-through terminal 0.2–10 mm² grey
2-conductor feed-through terminal, 10 mm², side label holders, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 10.00 mm², grey Lieske Part No.: 137170 Mfg Part No: 284-101 |
113,05 EUR 113,85 EUR
≈ £94.51 | ≈ $125.82
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 784-623 1-conductor terminal equipotential bonding 0.2–10(16) mm² grey
1-conductor equipotential bonding terminal, 10 mm², CAGE CLAMP®, 10.00 mm², grey Lieske Part No.: 142251 Mfg Part No: 784-623 |
102,36 EUR 103,95 EUR
≈ £85.57 | ≈ $113.93
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 784-601 2-conductor passage terminal 0.2-10(16) mm² grey
Through terminals Through terminals, gray for mounting rail TS 35, 800 V Width: 10 mm Rated current: 57 A Rated cross-section: 10.0 mm ² Type: 784-601 Quantity: 1 unit. Lieske Part No.: 179956 Mfg Part No: 784-601 |
2,66 EUR 2,70 EUR
≈ £2.22 | ≈ $2.96
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
WAGO 284-904 2-conductor passage terminal 0.2–10 mm² blue
2-wire front wiring, through terminals (Center marking) Cross section / mm ² 0.2 to 10 Color: blue Width: 10 mm Type: 284-904 Quantity: 1 unit. Lieske Part No.: 180572 Mfg Part No: 284-904 |
2,83 EUR 2,85 EUR
≈ £2.37 | ≈ $3.15
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
WAGO 784-613 1-conductor N disconnect terminal 0.2–10(16) mm² blue
N-disconnect terminal blocks for mounting rail TS 35, Blue, 400 V Width: 10 mm Rated current: 57 A Rated cross-section: 8 mm ² Type: 784-613 Quantity: 1 unit. Lieske Part No.: 184563 Mfg Part No: 784-613 |
4,24 EUR 4,31 EUR
≈ £3.54 | ≈ $4.72
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
WAGO 284-104 2-conductor pass-through terminal 0.2–10 mm² blue
2-conductor feed-through terminal, 10 mm², side label holders, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 10.00 mm², blue Lieske Part No.: 250637 Mfg Part No: 284-104 |
116,85 EUR 117,32 EUR
≈ £97.69 | ≈ $130.05
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 284-607 2-conductor protective earth terminal 0.2–10 mm² green-yellow
The WAGO 284-607 is a 2-conductor protective earth terminal block, specifically designed for use in industrial electrical installations. It enables secure and reliable connection of protective earth ... Lieske Part No.: 263010 Mfg Part No: 284-607 |
5,94 EUR 5,97 EUR
≈ £4.97 | ≈ $6.61
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
WAGO 209-100 busbar carrier for cross bridge gray
Collective carrier for cross jumpers suitable for cross jumpers series 279-284, banana plug series 215 grey Lieske Part No.: 298748 Mfg Part No: 209-100 |
17,10 EUR 17,33 EUR
≈ £14.30 | ≈ $19.03
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 284-681 3-conductor pass-through terminal 0.2–10 mm² grey
3-conductor feed-through terminal, 10 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 10.00 mm², gray Lieske Part No.: 376183 Mfg Part No: 284-681 |
114,00 EUR 114,59 EUR
≈ £95.30 | ≈ $126.88
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 284-601 2-conductor pass-through terminal 0.2–10 mm² grey
2-conductor feed-through terminal, 10 mm², side label holders, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 10.00 mm², grey Lieske Part No.: 491926 Mfg Part No: 284-601 |
68,40 EUR 68,81 EUR
≈ £57.18 | ≈ $76.13
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 784-604 2-conductor pass-through terminal 0.2-10(16) mm² blue
Through terminals Through terminals, blue Width: 10 mm Rated current: 57 A Rated cross-section: 10.0 mm ² Type: 784-604 Quantity: 1 unit. Lieske Part No.: 666283 Mfg Part No: 784-604 |
70,06 EUR 71,28 EUR
≈ £58.57 | ≈ $77.98
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 284-107 2-conductor protective earth terminal 0.2–10 mm² green-yellow
2-conductor protective conductor terminal, 10 mm², side label holders, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 10.00 mm², green-yellow Lieske Part No.: 709109 Mfg Part No: 284-107 |
275,50 EUR 277,20 EUR
≈ £230.32 | ≈ $306.63
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 284-684 3-conductor pass-through terminal 0.2–10 mm² blue
3-conductor feed-through terminal, 10 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 10.00 mm², blue Lieske Part No.: 735397 Mfg Part No: 284-684 |
117,56 EUR 118,31 EUR
≈ £98.28 | ≈ $130.84
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 284-902 2-conductor pass-through terminal 0.2–10 mm² orange
2-conductor feed-through terminal, 10 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 10.00 mm², orange Lieske Part No.: 741090 Mfg Part No: 284-902 |
70,77 EUR 71,28 EUR
≈ £59.16 | ≈ $78.77
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 284-687 3-wire protective earth terminal 0.2–10 mm² green-yellow
3-conductor protective conductor terminal, 10 mm², center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 10.00 mm², green-yellow Lieske Part No.: 761533 Mfg Part No: 284-687 |
200,45 EUR 201,71 EUR
≈ £167.58 | ≈ $223.10
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 284-901 2-conductor pass-through terminal 0.2–10 mm² grey
2-wire front wiring, through terminals (center marking) cross section / mm ², 2 - color: gray width: mm Type: 284-9 ST. Lieske Part No.: 830663 Mfg Part No: 284-901 |
2,74 EUR 2,75 EUR
≈ £2.29 | ≈ $3.05
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
WAGO 284-682 3-conductor pass-through terminal 0.2–10 mm² orange
Quantity: 25 ST. Lieske Part No.: 947212 Mfg Part No: 284-682 |
117,56 EUR 118,31 EUR
≈ £98.28 | ≈ $130.84
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 284-907 2-conductor protective earth terminal 0.2–10 mm² green-yellow
2-wire front wiring, earthing terminals (center marking) Conductor cross-section: 2 - mm ² color: green yellow Width: mm Type: 284-9 7 item: ST. Lieske Part No.: 965630 Mfg Part No: 284-907 |
5,94 EUR 5,97 EUR
≈ £4.97 | ≈ $6.61
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
WAGO 284-691 2-conductor Ex e II passage terminal 0.5–10 mm² light grey
2-conductor feed-through terminal, 10 mm², suitable for Ex e II applications, side label holders, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 10.00 mm², light grey Lieske Part No.: 1581180 Mfg Part No: 284-691 |
70,77 EUR 71,28 EUR
≈ £59.16 | ≈ $78.77
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 284-992 2-conductor Ex e II passage terminal 0.5–10 mm² light grey
2-wire feed-through terminal Ex e II suitable for Ex e II applications light grey Lieske Part No.: 1964032 Mfg Part No: 284-992 |
70,77 EUR 71,28 EUR
≈ £59.16 | ≈ $78.77
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 284-993 3-wire Ex e II passage terminal 0.5–10 mm² light grey
3-conductor feed-through terminal, 10 mm², suitable for Ex e II applications, center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 10.00 mm², light gray Lieske Part No.: 1964033 Mfg Part No: 284-993 |
117,56 EUR 118,31 EUR
≈ £98.28 | ≈ $130.84
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 284-607/999-950 2-conductor protective earth terminal 0.5–10 mm² green-yellow
2-conductor protective conductor terminal, 10 mm², suitable for Ex e II applications, side label holders, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 10.00 mm², green-yellow Lieske Part No.: 1964129 Mfg Part No: 284-607/999-950 |
155,32 EUR 156,17 EUR
≈ £129.85 | ≈ $172.87
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 284-687/999-950 3-wire protective earth terminal 0.5-10 mm² green-yellow
3-conductor protective conductor terminal, 10 mm², suitable for Ex e II applications, center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 10.00 mm², green-yellow Lieske Part No.: 1964130 Mfg Part No: 284-687/999-950 |
209,24 EUR 210,38 EUR
≈ £174.92 | ≈ $232.88
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 284-907/999-950 2-conductor protective earth terminal 0.5–10 mm² green-yellow
2-conductor protective conductor terminal, 10 mm², suitable for Ex e II applications, center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 10.00 mm², green-yellow Lieske Part No.: 1964131 Mfg Part No: 284-907/999-950 |
155,32 EUR 156,17 EUR
≈ £129.85 | ≈ $172.87
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 784-607/999-950 2-conductor protective earth terminal 0.2-10(16) mm² green-yellow
2-wire protective conductor terminal suitable for Ex e II applications only use on copper mounting rails green-yellow Lieske Part No.: 1964272 Mfg Part No: 784-607/999-950 |
152,00 EUR 154,44 EUR
≈ £127.07 | ≈ $169.18
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 784-992 2-conductor Ex e II passage terminal 0.2–10 mm² light grey
2-conductor feed-through terminal, 10 mm², suitable for Ex e II applications, center labeling, for mounting rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 10.00 mm², light gray Lieske Part No.: 1964273 Mfg Part No: 784-992 |
70,54 EUR 71,53 EUR
≈ £58.97 | ≈ $78.51
Made to order · Delivery time approx. 20 workdaysinfo_outline
|