WAGO 2010-1302 3-wire passage terminal 0.5-10(16) mm² orange
|
93,81 EUR |
|||||||||||
|
( 111,63 EUR incl. VAT ) ≈ £78.43 | ≈ $104.41 plus delivery charges: 55,00 € |
|||||||||||
| in stockinfo_outline | |||||||||||
| Sales unit: 25 pieces | |||||||||||
| Lieske Part No.: | 820072 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | 2010-1302 | ||||||||||
| UPC/EAN: | 4017332076197 | ||||||||||
| Weight: | 0.637 kg | ||||||||||
| Type: | 2010-1302 | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for WAGO 2010-1302:
The WAGO 2010-1302 is a 3-conductor pass-through terminal block in orange colour, specifically designed for use in explosion-protected installations according to category Ex e II. This terminal block enables the secure connection of three conductors within a single component, with the pass-through function ensuring continuous current flow across multiple terminals. The terminal block is intended for use in industrial installations, particularly in areas where increased explosion protection is required, for example in the chemical industry or during the processing of gases and vapours.
Applications
The terminal block is suitable for applications in the Ex e II category, meaning it can be used in environments where explosive atmospheres may occur, yet can be operated safely under specific conditions. The category Ex e II refers to devices approved for use in Zone 2 (occasional explosion hazard) or Zone 22 (occasional explosion hazard due to solids). The terminal block is therefore suitable for use in industrial installations with heightened safety requirements, where a secure electrical connection is needed under potentially hazardous conditions.
Functions and Equipment in Detail
The terminal block is designed as a pass-through terminal block, meaning it enables an electrical connection across multiple terminals without requiring additional connecting wires. The 3-conductor function allows the simultaneous connection of three individual conductors at one terminal point, thereby increasing mounting efficiency. This specification refers to the maximum permissible conductor size that can be safely processed in the terminal block. The orange colour serves as a visual identifier and is typical for terminals used in explosion-protected installations.
Technology Explained Simply
The terminal block operates on the principle of a pass-through terminal block, where current flow remains uninterrupted across multiple terminals. This is achieved through a special construction of the terminal block, where contacts are arranged to enable direct electrical connection between individual conductors. The Ex e II approval means the terminal block complies with the requirements of the European Explosion Protection Directive (ATEX) for use in explosive environments. The terminal block is therefore designed for use in environments where explosions caused by electrical sparks or overheating must be prevented.
Compatibility and Accessories
The terminal block is compatible with various accessories that facilitate mounting and identification. These include, for example, group label holders such as the 2009-193, which is green and designed for 15 mm spacing, as well as quick labelling systems such as the Mini-WSB in various colours (yellow, red, orange). Also compatible are wire end ferrules such as the 216-286 for 2.5 mm²/AWG 14 with plastic collar. Other accessories include end plates such as the 2010-1392 in orange, cover profiles such as the 709-156 transparent, and comb bridges such as the 2010-402 light grey 2-way 57A. Warning covers such as the 2010-115 with black lightning bolt symbol for 5 terminals in yellow can be used to mark hazardous areas. The combination with these accessories enables structured and safe installation in industrial facilities.
Mounting and Installation
Mounting is carried out in the usual manner within a terminal block field, inserting the terminal block into the designated grooves. The connection of conductors is made by inserting the conductors into the terminal opening and then tightening using a screwdriver or terminal crimping tool. The terminal block is designed to ensure a secure and durable connection, even under industrial loads. The use of accessories such as group label holders or labelling systems facilitates identification and maintenance of the installation.
Advantages in Operation
The terminal block provides a reliable electrical connection in explosive environments, thereby increasing the safety of the installation. The pass-through function reduces the number of required connections and thus reduces the risk of errors. Compatibility with various accessories enables flexible and structured mounting. The orange colour supports visual identification, which simplifies maintenance and inspection. The Ex e II approval guarantees that the terminal block meets the required safety standards and may be used in corresponding installations.
The item price shown refers to 25 pieces WAGO 2010-1302
Applications
The terminal block is suitable for applications in the Ex e II category, meaning it can be used in environments where explosive atmospheres may occur, yet can be operated safely under specific conditions. The category Ex e II refers to devices approved for use in Zone 2 (occasional explosion hazard) or Zone 22 (occasional explosion hazard due to solids). The terminal block is therefore suitable for use in industrial installations with heightened safety requirements, where a secure electrical connection is needed under potentially hazardous conditions.
Functions and Equipment in Detail
The terminal block is designed as a pass-through terminal block, meaning it enables an electrical connection across multiple terminals without requiring additional connecting wires. The 3-conductor function allows the simultaneous connection of three individual conductors at one terminal point, thereby increasing mounting efficiency. This specification refers to the maximum permissible conductor size that can be safely processed in the terminal block. The orange colour serves as a visual identifier and is typical for terminals used in explosion-protected installations.
Technology Explained Simply
The terminal block operates on the principle of a pass-through terminal block, where current flow remains uninterrupted across multiple terminals. This is achieved through a special construction of the terminal block, where contacts are arranged to enable direct electrical connection between individual conductors. The Ex e II approval means the terminal block complies with the requirements of the European Explosion Protection Directive (ATEX) for use in explosive environments. The terminal block is therefore designed for use in environments where explosions caused by electrical sparks or overheating must be prevented.
Compatibility and Accessories
The terminal block is compatible with various accessories that facilitate mounting and identification. These include, for example, group label holders such as the 2009-193, which is green and designed for 15 mm spacing, as well as quick labelling systems such as the Mini-WSB in various colours (yellow, red, orange). Also compatible are wire end ferrules such as the 216-286 for 2.5 mm²/AWG 14 with plastic collar. Other accessories include end plates such as the 2010-1392 in orange, cover profiles such as the 709-156 transparent, and comb bridges such as the 2010-402 light grey 2-way 57A. Warning covers such as the 2010-115 with black lightning bolt symbol for 5 terminals in yellow can be used to mark hazardous areas. The combination with these accessories enables structured and safe installation in industrial facilities.
Mounting and Installation
Mounting is carried out in the usual manner within a terminal block field, inserting the terminal block into the designated grooves. The connection of conductors is made by inserting the conductors into the terminal opening and then tightening using a screwdriver or terminal crimping tool. The terminal block is designed to ensure a secure and durable connection, even under industrial loads. The use of accessories such as group label holders or labelling systems facilitates identification and maintenance of the installation.
Advantages in Operation
The terminal block provides a reliable electrical connection in explosive environments, thereby increasing the safety of the installation. The pass-through function reduces the number of required connections and thus reduces the risk of errors. Compatibility with various accessories enables flexible and structured mounting. The orange colour supports visual identification, which simplifies maintenance and inspection. The Ex e II approval guarantees that the terminal block meets the required safety standards and may be used in corresponding installations.
The item price shown refers to 25 pieces WAGO 2010-1302
| General | |
| Terminal type | 3-wire pass-through terminal |
| Colour | Orange |
| Application | Ex e II suitable |
| Conductor cross section | 0,5-10 mm² |
| Maximum conductor cross-section | 16 mm² |
Questions & answers
What is the delivery time of WAGO 2010-1302 3-wire passage terminal 0.5-10(16) mm² orange?
The article WAGO 2010-1302 3-wire passage terminal 0.5-10(16) mm² orange is currently in stock
According to our experience the article is ready for dispatch within 7 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of WAGO 2010-1302 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you WAGO 2010-1302 3-wire passage terminal 0.5-10(16) mm² orange always at the best possible price. We can give you a discount of 2% on WAGO 2010-1302 3-wire passage terminal 0.5-10(16) mm² orange if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 6 pieces of WAGO 2010-1302 3-wire passage terminal 0.5-10(16) mm² orange we can offer you a price of 88,88 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
How many units does the article contain?
WAGO 2010-1302 3-wire passage terminal 0.5-10(16) mm² orange is offered by us in a sales unit of 25 pieces If you need a larger quantity, you can contact us at any time. We will make a special offer for you
Fitting accessory for WAGO 2010-1302 3-wire passage terminal 0.5-10(16) mm² orange
 |
WAGO 793-5501/000-006 Multilabel system WMB unprinted stretchable 5–5.2 mm blue
WMB multi-labeling system unprinted for terminal width 5 - 17.5 mm stretchable 5 - 5.2 mm 10 strips with 10 labels per card blue Lieske Part No.: 101925 Mfg Part No: 793-5501/000-006 |
23,42 EUR 23,56 EUR
 ≈ £19.58 | ≈ $26.07
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 248-501/000-023 quick designation System Mini-WSB green
Mini WSB quick labelling system unprinted label width 5 mm 10 strips with 10 labels per card green Lieske Part No.: 104969 Mfg Part No: 248-501/000-023 |
20,28 EUR 20,39 EUR
≈ £16.95 | ≈ $22.57
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 248-501/000-024 Mini-WSB quick labeling system violet
Mini WSB label card, as card, non-stretchable, unprinted, snap-on, violet Lieske Part No.: 104970 Mfg Part No: 248-501/000-024 |
20,28 EUR 20,39 EUR
≈ £16.95 | ≈ $22.57
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 2009-192 group label holder TOPJOBS snap-in for Brücke holes 10 mm green
TOPJOB®S group plate carrier snaps into the bridge opening 10 mm wide grey Lieske Part No.: 111604 Mfg Part No: 2009-192 |
7,31 EUR 7,35 EUR
≈ £6.11 | ≈ $8.14
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 2010-1392 end plate and intermediate plate orange
End and intermediate plate 1 mm thick orange Lieske Part No.: 150177 Mfg Part No: 2010-1392 |
18,29 EUR 18,32 EUR
≈ £15.29 | ≈ $20.36
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 2009-191 group label holder TOPJOBS snap-in bridge 5 mm grey
TOPJOB®S group plate carrier snaps into the bridge opening 5 mm wide grey Lieske Part No.: 162287 Mfg Part No: 2009-191 |
7,36 EUR 7,43 EUR
≈ £6.15 | ≈ $8.19
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 210-196 aluminium support rail aluminium metallic plain
Aluminium support rail 35 x 8.2 mm 1.6 mm thick 2 m long unperforated according to EN 60715 Aluminium, metallic bright Lieske Part No.: 183023 Mfg Part No: 210-196 |
22,59 EUR 22,72 EUR
≈ £18.89 | ≈ $25.14
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 793-5501 Multilabel system WMB unprinted expandable 5–5.2 mm white
WMB multi-labeling system unprinted for terminal width 5 - 17.5 mm stretchable 5 - 5.2 mm 10 strips with 10 labels per card white Lieske Part No.: 203298 Mfg Part No: 793-5501 |
3,61 EUR 3,63 EUR
≈ £3.02 | ≈ $4.02
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
 |
WAGO 2010-115 warning cover with black lightning bolt for 5 terminals yellow
Warning cover, with black lightning arrow, for 5 terminals, yellow Lieske Part No.: 208577 Mfg Part No: 2010-115 |
11,16 EUR
≈ £9.33 | ≈ $12.42
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 248-501/000-002 quick designation System Mini-WSB yellow
Mini WSB label card, as card, non-stretchable, unprinted, snap-on, yellow Lieske Part No.: 222437 Mfg Part No: 248-501/000-002 |
20,28 EUR 20,39 EUR
≈ £16.95 | ≈ $22.57
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 210-721 actuation tool, partially insulated, shaft type 3, blade 5.5x0.8 mm
Operating tool with partially insulated shaft type 3, blade (5.5 x 0.8) mm suitable for series 282, 283, 284, 285, 782, 783, 784, 785, 2006, 2010, 2016 Lieske Part No.: 226826 Mfg Part No: 210-721 |
11,75 EUR 11,82 EUR
≈ £9.82 | ≈ $13.08
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 2009-182 test probe grey
Test tap for max. 2.5 qmm for tool-free connection of individual test leads from 0.08 qmm - 2.5 qmm grey Lieske Part No.: 252820 Mfg Part No: 2009-182 |
155,80 EUR 156,67 EUR
≈ £130.25 | ≈ $173.41
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 2016-499 reduction bridge light grey from 10/16 mm² to 10/6/4/2.5 mm²
Reducing jumper insulated from 16/10 qmm to 10/6/4/2.5 qmm nominal current 57 A light grey Lieske Part No.: 271500 Mfg Part No: 2016-499 |
1,63 EUR 1,64 EUR
≈ £1.36 | ≈ $1.81
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
WAGO 248-501/000-006 quick designation System Mini-WSB blue
Mini WSB quick labelling system unprinted label width 5 mm 10 strips with 10 labels per card blue Lieske Part No.: 290620 Mfg Part No: 248-501/000-006 |
20,28 EUR 20,39 EUR
≈ £16.95 | ≈ $22.57
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 210-113 steel support rail 35x7.5 mm 1 mm thick 2 m unperforated galvanized CR/6-free
Steel support rail 35 x 7.5 mm 1 mm thick 2 m long unperforated according to EN 60715 bluish, galvanized, chromated, CR3 Lieske Part No.: 298797 Mfg Part No: 210-113 |
12,52 EUR 12,59 EUR
≈ £10.47 | ≈ $13.93
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 2009-193 group label holder TOPJOBS snap-in for Brücke opening 15 mm green
TOPJOB®S group plate holder snaps into the bridge opening 15 mm wide grey Lieske Part No.: 368631 Mfg Part No: 2009-193 |
7,60 EUR 7,67 EUR
≈ £6.35 | ≈ $8.46
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 248-501/000-012 Mini-WSB quick labeling system orange
Mini WSB label card, as card, non-stretchable, unprinted, snap-on, orange Lieske Part No.: 398280 Mfg Part No: 248-501/000-012 |
20,28 EUR 20,39 EUR
≈ £16.95 | ≈ $22.57
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 210-197 steel support rail 35x15 mm 1.5 mm thick 2 m yellow galvanized CR/6-free
Steel support rail 35 x 15 mm 1.5 mm thick 2 m long perforated similar to EN 60715 bluish, galvanized, chromated, CR3 Lieske Part No.: 412093 Mfg Part No: 210-197 |
20,76 EUR 20,88 EUR
≈ £17.36 | ≈ $23.11
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
WAGO 2009-110 labelling strip white
Labeling strip unprinted 11 mm wide 50 m roll for series TOPJOB®S white Lieske Part No.: 445332 Mfg Part No: 2009-110 |
188,10 EUR 189,09 EUR
≈ £157.25 | ≈ $209.36
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
 |
WAGO 248-501/000-005 Mini-WSB quick labeling system red
Mini WSB quick labelling system unprinted label width 5 mm 10 strips with 10 labels per card red Lieske Part No.: 457430 Mfg Part No: 248-501/000-005 |
20,28 EUR 20,39 EUR
≈ £16.95 | ≈ $22.57
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 2010-405 comb bridge light grey 5-way 57A
Comb jumper insulated 5-way rated current 57 A light grey Lieske Part No.: 457503 Mfg Part No: 2010-405 |
86,45 EUR 86,87 EUR
≈ £72.27 | ≈ $96.22
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 2009-145 Mini-WSB-Inline 5-5.2 mm 1700S White
Mini-WSB Inline unprinted 1,700 WMB signs (5 mm) on roll stretchable 5 - 5.2 mm white Lieske Part No.: 467714 Mfg Part No: 2009-145 |
66,82 EUR 67,22 EUR
≈ £55.86 | ≈ $74.37
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 2009-174 test adapter grey for test plug D=4 mm grey
Test adapter for test plug Ø 4 mm for testing TOPJOB®S terminal blocks grey Lieske Part No.: 531318 Mfg Part No: 2009-174 |
142,74 EUR 143,55 EUR
≈ £119.33 | ≈ $158.87
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 2009-198 labelling adapter grey for lateral labelling insertion for ≥ 5 mm
Quantity: 25 ST. Lieske Part No.: 533952 Mfg Part No: 2009-198 |
7,31 EUR 7,35 EUR
≈ £6.11 | ≈ $8.14
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 2010-100 finger protection cover yellow
Finger protection cover serves as contact protection for unused terminal points yellow Lieske Part No.: 545858 Mfg Part No: 2010-100 |
8,12 EUR 8,17 EUR
≈ £6.79 | ≈ $9.04
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 210-198 copper support rail copper metallic bright
Copper support rail 35 x 15 mm 2.3 mm thick 2 m long unperforated according to EN 60715 Copper, metallically bare Lieske Part No.: 570976 Mfg Part No: 210-198 |
191,90 EUR 193,05 EUR
≈ £160.43 | ≈ $213.58
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 216-284 wire end ferrule for 1.5 mm²/AWG 16 with plastic collar, galvanically zinc-plated
Aderendhülse, Hülse für 1,5 mm² / AWG 16, mit Kunststoffkragen, galvanisch verzinnt, Elektrolytkupfer, gasdicht aufgecrimpt, gemäß DIN 46228, Teil 4/09.90, schwarz Lieske Part No.: 577239 Mfg Part No: 216-284 |
101,65 EUR 101,97 EUR
≈ £84.98 | ≈ $113.14
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 2010-402 comb bridge light grey 2-way 57A
Comb jumper insulated 2-way rated current 57 A light grey Lieske Part No.: 631444 Mfg Part No: 2010-402 |
0,94 EUR 0,95 EUR
≈ £0.79 | ≈ $1.05
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
 |
WAGO 2010-435 comb bridge light grey 57A from 1 to 5
Bridge, from 1 to 5, insulated, light grey Lieske Part No.: 678906 Mfg Part No: 2010-435 |
92,86 EUR 93,31 EUR
≈ £77.63 | ≈ $103.35
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
WAGO 2010-404 comb bridge light grey 4-way 57A
Comb jumper insulated 4-way rated current 57 A light grey Lieske Part No.: 747003 Mfg Part No: 2010-404 |
64,60 EUR 65,09 EUR
≈ £54.01 | ≈ $71.90
Made to order · Delivery time approx. 20 workdaysinfo_outline
|