Vossloh-Schwabe 100970 ceramic holder for G4, GZ4, GX5.3, G6.35, GY6.35 content_copy

The socket 100970 from Vossloh-Schwabe is a ceramic socket for low-voltage halogen lamps, specifically designed for use in lighting systems with low operating voltage. It supports various lamp base types, including G4, GX5.3, GY6.35, and GZ6.35, and serves as an electrical connection point for lamps in luminaire construction. The socket is designed for use in electrical installations where a secure and thermally stable connection is required, particularly in applications with halogen lamps that generate high temperatures during operation.

Socket type and design
The socket is made of ceramic, a material suitable for lighting technology due to its high heat resistance and electrical insulation properties. The cover plate is made of mica, providing additional protection against heat and electrical discharges. The round design allows for universal mounting in various luminaire constructions. The socket features through-holes with M3 threading, which can be used for securing it to luminaire bodies or mounting plates.

Technical design and wiring
The socket is equipped with a wire having a cross-sectional area of 0.75 mm². This wire is intended for connection to the electrical network and enables a secure power supply to the connected lamp. The usable wire length is 140 mm, which is sufficient to allow flexible installation in various mounting situations. The wire is designed for use in electrical installations operating under low-voltage conditions, typically at voltages below 50 V.

Applications
The socket is intended for use in low-voltage lighting systems, particularly in installations with halogen lamps used in indoor and outdoor luminaires, accent lighting, spotlights, or technical devices. The ceramic construction makes it especially suitable for applications involving high temperatures, as it remains thermally stable and does not pose a risk of insulation failure. The socket is not intended for high-voltage installations or for direct connection to the public power grid (230 V).

Compatibility and accessories
The socket is compatible with lamp base types G4, GX5.3, GY6.35, and GZ6.35. These base types are widely used in low-voltage lighting technology and are found in various luminaire constructions. The socket can be used in combination with corresponding halogen lamps designed for the respective base size.

Mounting and installation
Mounting is done via the through-holes with M3 threading, allowing the socket to be secured to a suitable substrate or within a luminaire structure. The wire can be extended or connected according to installation requirements, while complying with electrical regulations and safety standards.

Operational advantages
The ceramic socket offers high thermal stability and electrical insulation, increasing operational safety. The mica cover plate provides additional protection against heat and electrical discharges. The wire with a 0.75 mm² cross-section is adequately dimensioned for low-voltage applications and ensures reliable power supply. The universal compatibility with multiple base types increases flexibility in lamp selection and simplifies replacement during operation.

General
Socket type	Ceramics
Compatible sockets	G4, GX5,3, GY6,35, GZ6,35
Cover plate	Mica
Pass-through holes	M3
Cable	0,75 mm²
Usable cable length	140 mm

---