VOKA A-2Y(L)2Y50x2x0,8 A-2Y(L)2Y 50x2x0.8 mm² St.III Bd. telephone cable for underground installation VDE0816
|
13,67 EUR |
|||||||||||
|
incl. 5,68 EUR copper surcharge ( 16,27 EUR incl. VAT ) ≈ £11.44 | ≈ $15.02 plus delivery charges: 55,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline | |||||||||||
| In Stock: >1000 meters | |||||||||||
| Lieske Part No.: | 280806 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | A-2Y(L)2Y50x2x0,8 | ||||||||||
| UPC/EAN: | 4046725046332 | ||||||||||
| Weight: | 0.745 kg | ||||||||||
| Type: | A-2Y(L)2Y 50 X 2 X 0,8 | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for VOKA A-2Y(L)2Y50x2x0,8:
Applications
This cable is primarily intended for low-frequency applications and is preferably operated in the trunk network without loading. It is suitable for connecting telephone handsets and serves as basic infrastructure in fixed telephone networks. The design with polyethylene insulation and sheathing offers high mechanical stability and chemical resistance, making it suitable for use in various environments. The cable structure enables reliable signal transmission over long distances, with stranding in star quad and bundle configurations enhancing electromagnetic shielding and mechanical stability.
Functions and Equipment in Detail
The cable consists of single-strand, bare copper conductors with a diameter of 0.8 mm. The conductors are insulated with polyethylene (PE), ensuring high insulation strength and resistance to moisture and chemical influences. Conductor identification is achieved through black rings, enabling clear identification of individual conductors. The stranding is done in a star quad system, where 4 conductors form a star quad, 5 star quads form a basic bundle, and 5 or 10 basic bundles form a main bundle. These bundles are stranded into the cable core, with core wrapping enhancing mechanical stability. The outer sheath consists of a layered sheath made of aluminum tape (0.2 mm on both sides), coated with plastic and welded to the black PE sheath. This sheath protects the cable from external influences and provides high mechanical strength.
Technology Explained Simply
The rated voltage is 225 V, sufficient for use in telecommunications systems. The test voltage of 2000 V ensures the electrical strength of the cable. The loop resistance of 73.2 Ohm/km at a conductor diameter of 0.8 mm is suitable for signal transmission in telecommunications. The current-carrying capacity of 5.1 A allows operation under normal loading conditions. The operating capacitance of 55 nF/km and insulation resistance of 5 GOhm x km ensure high signal quality and minimize losses. The capacitive couplings (K3) are 300 pF/400 pF at 800 Hz and 300 m, ensuring electromagnetic compatibility. The line attenuation is approximately 0.78 dB/km at 800 Hz, indicating low signal attenuation over the cable length. The temperature ranges are -20 °C to +50 °C during installation and -30 °C to +70 °C after installation, enabling broad applicability in various climate zones. The bending radius is 7.5 times the cable diameter, allowing flexible installation without damaging the cable.
Compatibility and Accessories
The cable is compatible with other telecommunications earth cables according to DIN VDE 0816 Part 1. It can be integrated into existing telecommunications infrastructures, particularly in systems based on polyethylene insulation and sheathing. The stranding in star quad and bundle configurations enables easy integration into existing network structures. The sheath marking with continuous meter marking and the inscription “telephone handset” facilitates identification and maintenance of the cable during operation.
Installation and Mounting
Installation is carried out underground, with temperature conditions during installation (-20 °C to +50 °C) and after installation (-30 °C to +70 °C) to be considered. The bending radius of 7.5 times the cable diameter must be observed to avoid cable damage. Installation typically occurs in a protective conduit or directly in the ground, with mechanical stability ensured by the layered sheath and PE sheath. Installation does not require special tools, but careful handling is necessary to avoid mechanical damage.
Advantages in Operation
The cable offers high mechanical strength and chemical resistance, enabling long service life and low maintenance costs. The low line attenuation and high insulation strength ensure reliable signal transmission. Clear conductor identification and meter marking facilitate maintenance and fault diagnosis. Compatibility with existing telecommunications systems enables easy integration into existing infrastructures. The use of polyethylene as insulation and sheathing material provides high resistance to moisture and chemical influences, increasing reliability in outdoor environments.
| General | |
| Conductor diameter | 0,8 mm |
| Wire insulation | PE |
| Nominal voltage | 225 V |
| Test voltage | 2000 V |
| Loop resistance | 73,2 Ohm/km |
| Current carrying capacity | 5,1 A |
| Operating capacity | 55 nF/km |
| Insulation resistance | 5 GOhm x km |
| Capacitive couplings K3 (800 Hz, 300 m) | 300 pF/400 pF |
| Cable attenuation (800 Hz) | 0,78 dB/km |
| Installation temperature range | -20 °C to +50 °C |
| Temperature range after installation | -30 °C to +70 °C |
| Bending radius | 7.5 x cable diameter |
| Material outer sheath | aluminium tape with plastic coating and PE sheath |
| Conductor marking | black rings |
| Sheath marking | consecutive telephone handsets and meter marking white |
| Stranding | Star quad, basic bundle, main bundle, core winding |
The final cable weight will be determined before invoicing. The calculation is based on the copper content and any additional weight due to drums, pallets, or outer packaging. Prices are subject to this subsequent calculation.
Please note that for cables, that are not in stock and must be produced, the manufacturer may need an order of a minimum length that can be 5-10km depending on cable type!
Questions & answers
What is the delivery time of VOKA A-2Y(L)2Y50x2x0,8 A-2Y(L)2Y 50x2x0.8 mm² St.III Bd. telephone cable for underground installation VDE0816?
The article VOKA A-2Y(L)2Y50x2x0,8 A-2Y(L)2Y 50x2x0.8 mm² St.III Bd. telephone cable for underground installation VDE0816 is currently in stock
According to our experience the article is ready for dispatch within 3 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of VOKA A-2Y(L)2Y50x2x0,8 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you VOKA A-2Y(L)2Y50x2x0,8 A-2Y(L)2Y 50x2x0.8 mm² St.III Bd. telephone cable for underground installation VDE0816 always at the best possible price. We can give you a discount of 2% on VOKA A-2Y(L)2Y50x2x0,8 A-2Y(L)2Y 50x2x0.8 mm² St.III Bd. telephone cable for underground installation VDE0816 if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 25 meters of VOKA A-2Y(L)2Y50x2x0,8 A-2Y(L)2Y 50x2x0.8 mm² St.III Bd. telephone cable for underground installation VDE0816 we can offer you a price of 13,01 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

