Installation Material from U.I. Lapp

Cable gland SKINDICHT® SHVE-M 25X1.5/21/20/16, cable gland, M 25, clamping range (min./max.): 17.5 - 19.8 mm, wrench size 1: 30, nickel-plated brass, halogen-free, UV-resistant, IP 65, IP 66, IP 67, IP 68, EMC shielding, areas of application: medical technology, earthing cable gland, areas of application wherever electrical interference fields can occur, frequency converters, airports, measurement, control and regulation technology, benefits: optimal, low-resistance 360° shield contact, high protection class, high strain relief
Sales unit: 25 pieces
Lieske Part No.: 741306

Cable gland SKINDICHT® SHVE-M 32X1.5/29/22/17, cable gland, M 32, clamping range (min./max.): 19 - 21.8 mm, wrench size 1: 40, nickel-plated brass, halogen-free, UV-resistant, IP 65, IP 66, IP 67, IP 68, EMC shielding, areas of application: medical technology, earthing cable gland, areas of application wherever electrical interference fields can occur, frequency converters, airports, measurement, control and regulation technology, benefits: optimal, low-resistance 360° shield contact, high protection class, high strain relief
Sales unit: 10 pieces
Lieske Part No.: 450378

Cable gland SKINDICHT® SHVE-M ATEX 20X1.5, cable gland, M 20, clamping range (min./max.): 6.9 - 8.9 mm, wrench size 1: 22, nickel-plated brass, halogen-free, UV-resistant, IP 68 - 5 bar (30 min), IP 66, use in Ex areas, EMC shielding, areas of application: Equipment group II / category 2G+1D,'Devices, machines and systems with ignition protection type increased safety ''e'', Dust explosion protection through housing ''t''',Chemical and petrochemical industry,Plant engineering,For EMC-compliant grounding of the copper shield braid, Benefits: Antistatic, cold-shock resistant and safe,Faster and easier to install than any other system,Optimal, low-resistance 360° shield contact,Easy to uninstall,Easy cable adjustment
Sales unit: 10 pieces
Lieske Part No.: 461963

Flat cable screw connection SKINDICHT® SVF-M 20X1.5/16, flat cable screw connection, M 20, flat cable width (min./max.) 0.0 - 15.0 mm, flat cable height (min./max.) 0.0 - 5.0 mm, nickel-plated brass, UV-resistant, IP 54, areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For sealing and strain-relieving cable entry into a housing, For use with ÖLFLEX® flat cables, Benefits: Practical large clear width through which up to two flat cables can be clamped, Side sealing lips adapt flexibly to the dimensions of the flat cable, so that cable-specific sealing dimensions are not required, High functional reliability thanks to optimal strain relief, Large, variable clamping range for different flat cable dimensions (width/height)
Sales unit: 25 pieces
Lieske Part No.: 778492

Flat cable screw connection SKINDICHT® SVF-M 25X1.5/21, flat cable screw connection, M 25, flat cable width (min./max.) 9.0 - 20.0 mm, flat cable height (min./max.) 3.0 - 8.0 mm, nickel-plated brass, UV-resistant, IP 54, areas of application: Withstands high chemical and mechanical stress,Suitable for outdoor use,For sealing and strain-relieving cable entry into a housing,For use with ÖLFLEX® flat cables, Benefits: Practical large clear width through which up to two flat cables can be clamped,Side sealing lips adapt flexibly to the dimensions of the flat cable, so that cable-specific sealing dimensions are no longer necessary,High functional reliability thanks to optimal strain relief,Large, variable clamping range for different flat cable dimensions (width/height)
Sales unit: 25 pieces
Lieske Part No.: 727590

Flat cable screw connection SKINDICHT® SVF-M 32X1.5/29, flat cable screw connection, M 32, flat cable width (min./max.) 14.0 - 27.0 mm, flat cable height (min./max.) 4.0 - 11.5 mm, nickel-plated brass, UV-resistant, IP 54, areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For sealing and strain-relieving cable entry into a housing, For use with ÖLFLEX® flat cables, Benefits: Practical large clear width through which up to two flat cables can be clamped, Side sealing lips adapt flexibly to the dimensions of the flat cable, so that cable-specific sealing dimensions are no longer necessary, High functional reliability thanks to optimal strain relief, Large, variable clamping range for different flat cable dimensions (width/height)
Sales unit: 10 pieces
Lieske Part No.: 448984

Flat cable screw connection SKINDICHT® SVF-M 40X1.5/36, flat cable screw connection, M 40, flat cable width (min./max.) 24.0 - 34.0 mm, flat cable height (min./max.) 4.0 - 11.5 mm, nickel-plated brass, UV-resistant, IP 54, areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For sealing and strain-relieving cable entry into a housing, For use with ÖLFLEX® flat cables, Benefits: Practical large clear width through which up to two flat cables can be clamped, Side sealing lips adapt flexibly to the dimensions of the flat cable, so that cable-specific sealing dimensions are no longer necessary, High functional reliability thanks to optimal strain relief, Large, variable clamping range for different flat cable dimensions (width/height)
Sales unit: 10 pieces
Lieske Part No.: 137764

Flat cable screw connection SKINDICHT® SVF-M 50X1.5/42, flat cable screw connection, M 50, flat cable width (min./max.) 29.0 - 44.0 mm, flat cable height (min./max.) 5.0 - 12.0 mm, nickel-plated brass, UV-resistant, IP 54, areas of application: Withstands high chemical and mechanical stress,Suitable for outdoor use,For sealing and strain-relieving cable entry into a housing,For use with ÖLFLEX® flat cables, Benefits: Practical large clear width through which up to two flat cables can be clamped,Side sealing lips adapt flexibly to the dimensions of the flat cable, so that cable-specific sealing dimensions are no longer necessary,High functional reliability thanks to optimal strain relief,Large, variable clamping range for different flat cable dimensions (width/height)
Sales unit: 5 pieces
Lieske Part No.: 950029

Flat cable screw connection SKINDICHT® SVF-M 63X1.5/48, flat cable screw connection, M 63, flat cable width (min./max.) 34.0 - 50.0 mm, flat cable height (min./max.) 5.0 - 12.0 mm, nickel-plated brass, UV-resistant, IP 54, areas of application: Withstands high chemical and mechanical stress,Suitable for outdoor use,For sealing and strain-relieving cable entry into a housing,For use with ÖLFLEX® flat cables, Benefits: Practical large clear width through which up to two flat cables can be clamped,Side sealing lips adapt flexibly to the dimensions of the flat cable, so that cable-specific sealing dimensions are no longer necessary,High functional reliability thanks to optimal strain relief,Large, variable clamping range for different flat cable dimensions (width/height)
Sales unit: 5 pieces
Lieske Part No.: 564930

Angle cable gland SKINDICHT® RWV-M 12X1.5, angle cable gland, M 12, 90° angle, IP 55, areas of application: electric motor construction, angle glands are used where cables and lines should be routed as parallel as possible along the housing wall, light and sound applications, plant engineering, mechanical and equipment engineering, benefits: reduction of the installation height, seawater resistant, strain relief, sealing by means of a cut-in sealing ring, corrosion-resistant
Sales unit: 25 pieces
Lieske Part No.: 303118

Angle cable gland SKINDICHT® RWV-M 12X1.5 WO. E+D, Angle cable gland, M 12, halogen-free, 90° angle, , Areas of application: Electric motor construction, Angle glands are used where cables and lines should be routed as parallel as possible along the housing wall, Light and sound applications, Plant engineering, Mechanical and equipment engineering, Benefits: Space and weight-saving use due to thin cable diameters, Reduction in installation height, Combinations with different screw connections possible, Corrosion-resistant, Parallel routing of the cable on the housing
Sales unit: 25 pieces
Lieske Part No.: 440381

Angle cable gland SKINDICHT® RWV-M 16X1.5, angle cable gland, M 16, clamping range (min./max.): 3.0 - 9.0 mm, 90° angle, IP 55, areas of application: electric motor construction, angle glands are used where cables and lines should be routed as parallel as possible along the housing wall, light and sound applications, plant engineering, mechanical and equipment engineering, benefits: reduction of the installation height, seawater resistant, strain relief, sealing by means of a cut-out sealing ring, corrosion-resistant
Lieske Part No.: 662873

Angle cable gland SKINDICHT® RWV-M 16X1.5 WO. E+D, Angle cable gland, M 16, halogen-free, 90° angle, , Areas of application: Electric motor construction, Angle glands are used where cables and lines should be routed as parallel as possible along the housing wall, Light and sound applications, Plant engineering, Mechanical and equipment engineering, Benefits: Space and weight-saving use due to thin cable diameters, Reduction in installation height, Combinations with different screw connections possible, Corrosion-resistant, Parallel routing of the cable on the housing
Sales unit: 25 pieces
Lieske Part No.: 994304

Angle cable gland SKINDICHT® RWV-M 20X1.5, angle cable gland, M 20, clamping range (min./max.): 4.0 - 13.0 mm, 90° angle, IP 55, areas of application: electric motor construction, angle glands are used where cables and lines should be routed as parallel as possible along the housing wall, light and sound applications, plant engineering, mechanical and equipment engineering, benefits: reduction of the installation height, seawater resistant, strain relief, sealing by means of a cut-out sealing ring, corrosion-resistant
Lieske Part No.: 907227

Angle cable gland SKINDICHT® RWV-M 20X1.5 WO. E+D, Angle cable gland, M 20, halogen-free, 90° angle, , Areas of application: Electric motor construction, Angle glands are used where cables and lines should be routed as parallel as possible along the housing wall, Light and sound applications, Plant engineering, Mechanical and equipment engineering, Benefits: Space and weight-saving use due to thin cable diameters, Reduction in installation height, Combinations with different screw connections possible, Corrosion-resistant, Parallel routing of the cable on the housing
Sales unit: 25 pieces
Lieske Part No.: 429420

Angle cable gland SKINDICHT® RWV-M 25X1.5, angle cable gland, M 25, clamping range (min./max.): 8.5 - 17.5 mm, 90° angle, IP 55, areas of application: electric motor construction, angle glands are used where cables and lines should be routed as parallel as possible along the housing wall, light and sound applications, plant engineering, mechanical and equipment engineering, benefits: reduction of the installation height, seawater resistant, strain relief, sealing by means of a cut-out sealing ring, corrosion-resistant
Sales unit: 10 pieces
Lieske Part No.: 408215

Angle cable gland SKINDICHT® RWV-M 25X1.5 WO. E+D, Angle cable gland, M 25, halogen-free, 90° angle, , Areas of application: Electric motor construction, Angle glands are used where cables and lines should be routed as parallel as possible along the housing wall, Light and sound applications, Plant engineering, Mechanical and equipment engineering, Benefits: Space and weight-saving use due to thin cable diameters, Reduction in installation height, Combinations with different screw connections possible, Corrosion-resistant, Parallel routing of the cable on the housing
Sales unit: 10 pieces
Lieske Part No.: 434473

Angle cable gland SKINDICHT® RWV-M 32X1.5, angle cable gland, M 32, clamping range (min./max.): 16.0 - 25.0 mm, 90° angle, IP 55, areas of application: electric motor construction, angle glands are used where cables and lines should be routed as parallel as possible along the housing wall, light and sound applications, plant engineering, mechanical and equipment engineering, benefits: reduction of the installation height, seawater resistant, strain relief, sealing by means of a cut-out sealing ring, corrosion-resistant
Sales unit: 10 pieces
Lieske Part No.: 434459

Angle cable gland SKINDICHT® RWV-M 32X1.5 WO. E+D, Angle cable gland, M 32, halogen-free, 90° angle, , Areas of application: Electric motor construction, Angle glands are used where cables and lines should be routed as parallel as possible along the housing wall, Light and sound applications, Plant engineering, Mechanical and equipment engineering, Benefits: Space and weight-saving use due to thin cable diameters, Reduction in installation height, Combinations with different screw connections possible, Corrosion-resistant, Parallel routing of the cable on the housing
Sales unit: 10 pieces
Lieske Part No.: 849637

Angle cable gland SKINDICHT® RWV-M 40X1.5, angle cable gland, M 40, clamping range (min./max.): 23.0 - 32.0 mm, 90° angle, IP 55, areas of application: electric motor construction, angle glands are used where cables and lines should be routed as parallel as possible along the housing wall, light and sound applications, plant engineering, mechanical and equipment engineering, benefits: reduction of the installation height, seawater resistant, strain relief, sealing by means of a cut-out sealing ring, corrosion-resistant
Sales unit: 5 pieces
Lieske Part No.: 434460

Angle cable gland SKINDICHT® RWV-M 40X1.5 WO. E+D, Angle cable gland, M 40, halogen-free, 90° angle, , Areas of application: Electric motor construction, Angle glands are used where cables and lines should be routed as parallel as possible along the housing wall, Light and sound applications, Plant engineering, Mechanical and equipment engineering, Benefits: Space and weight-saving use due to thin cable diameters, Reduction in installation height, Combinations with different screw connections possible, Corrosion-resistant, Parallel routing of the cable on the housing
Sales unit: 5 pieces
Lieske Part No.: 440382

Flat cable screw connection SKINDICHT® SVFK-M 25/16, flat cable screw connection, M 25, flat cable width (min./max.) 0.0 - 15.0 mm, flat cable height (min./max.) 0.0 - 5.0 mm, polyamide galvanized, IP 54, areas of application: conveyors, switch cabinet construction, elevator construction, for the introduction of flat cables, pumps, benefits: cable-specific sealing dimensions are no longer required, large clear width, so up to two flat cables can be clamped, dimensionally tolerant system, economical plastic design, side sealing lips adjust automatically
Sales unit: 25 pieces
Lieske Part No.: 719667

Flat cable screw connection SKINDICHT® SVFK-M 32/21, flat cable screw connection, M 32, flat cable width (min./max.) 10.0 - 21.0 mm, flat cable height (min./max.) 3.0 - 8.0 mm, polyamide galvanized, IP 54, areas of application: conveyors, switch cabinet construction, elevator construction, for the introduction of flat cables, pumps, benefits: cable-specific sealing dimensions are no longer required, large clear width, so up to two flat cables can be clamped, dimensionally tolerant system, economical plastic design, side sealing lips adjust automatically
Sales unit: 25 pieces
Lieske Part No.: 971812

Flat cable screw connection SKINDICHT® SVFK-M 40/29, flat cable screw connection, M 40, flat cable width (min./max.) 16.0 - 28.0 mm, flat cable height (min./max.) 4.0 - 11.5 mm, polyamide galvanized, IP 54, areas of application: conveyors, switch cabinet construction, elevator construction, for the introduction of flat cables, pumps, benefits: cable-specific sealing dimensions are no longer required, large clear width, so up to two flat cables can be clamped, dimensionally tolerant system, economical plastic design, side sealing lips adjust automatically
Sales unit: 25 pieces
Lieske Part No.: 442310

Flat cable screw connection SKINDICHT® SVFK-M 50/36, flat cable screw connection, M 50, flat cable width (min./max.) 26.0 - 35.0 mm, flat cable height (min./max.) 4.0 - 11.5 mm, polyamide galvanized, IP 54, areas of application: conveyors, switch cabinet construction, elevator construction, for the introduction of flat cables, pumps, benefits: cable-specific sealing dimensions are no longer required, large clear width, so up to two flat cables can be clamped, dimensionally tolerant system, economical plastic design, side sealing lips adjust automatically
Sales unit: 5 pieces
Lieske Part No.: 1236327

Flat cable screw connection SKINDICHT® SVFK-M 50/42, flat cable screw connection, M 50, flat cable width (min./max.) 30.0 - 40.0 mm, flat cable height (min./max.) 5.0 - 12.0 mm, polyamide galvanized, IP 54, areas of application: conveyors, switch cabinet construction, elevator construction, for the introduction of flat cables, pumps, benefits: cable-specific sealing dimensions are no longer required, large clear width, so up to two flat cables can be clamped, dimensionally tolerant system, economical plastic design, side sealing lips adjust automatically
Sales unit: 5 pieces
Lieske Part No.: 459915

Flat cable gland SKINDICHT® SVFK-M 63/48, flat cable gland, M 63, flat cable width (min./max.) 36.0 - 45.0 mm, flat cable height (min./max.) 5.0 - 12.0 mm, polyamide galvanized, IP 54, areas of application: conveyors, switch cabinet construction, elevator construction, for the introduction of flat cables, pumps, benefits: cable-specific sealing dimensions are no longer required, large clear width, so up to two flat cables can be clamped, dimensionally tolerant system, economical plastic design, side sealing lips adjust automatically
Sales unit: 5 pieces
Lieske Part No.: 254244

Angle cable gland SKINDICHT® SE-M 20X1.5, Angle cable gland, M 20, Clamping range (min./max.): 4 - 13 mm, Flange, IP 55, Areas of application: For high mechanical loads, Wherever there is no threaded hole, Benefits: Sealing by means of a cut-in sealing ring, Low installation height, Easy to install, Corrosion-resistant, Absolutely secure cable entry
Sales unit: 10 pieces
Lieske Part No.: 440397

Angle cable gland SKINDICHT® SE-M 20X1.5 WO. E+D, angle cable gland, M 20, halogen-free, flange, , Areas of application: For use with metric SKINTOP®/SKINDICHT® cable glands, For fastening to the outer wall of housings without a thread that only allows one through-hole, Withstands high mechanical loads, For use with metric SILVYN® hose glands, Benefits: Stable and corrosion-resistant angle housing made of die-cast zinc, Secure cable entry for gentle cable entry, Can be combined with various screw connections, e.g. sealing, strain relief, kink protection, hose or earthing screw connections, Mounted O-ring enables a protection class of at least IP 55 due to the secure seal to the angle housing The screw connection used in the product is decisive for the protection class of the screw connection combination, Simple, twist-proof flange mounting using 2-4 mounting holes, Thanks to its small size, it is intended for use in confined spaces
Sales unit: 10 pieces
Lieske Part No.: 440434

Angle cable gland SKINDICHT® SE-M 25X1.5, Angle cable gland, M 25, Clamping range (min./max.): 8.5 - 17.5 mm, Flange, IP 55, Areas of application: For high mechanical loads, Wherever there is no threaded hole, Benefits: Sealing through cut-in sealing ring, Low installation height, Easy to install, Corrosion-resistant, Absolutely secure cable entry
Sales unit: 5 pieces
Lieske Part No.: 440453

Angle cable gland SKINDICHT® SE-M 25X1.5 WO. E+D, angle cable gland, M 25, halogen-free, flange, , Areas of application: For use with metric SKINTOP®/SKINDICHT® cable glands, For fastening to the outer wall of housings without a thread that only allows one through-hole, Withstands high mechanical loads, For use with metric SILVYN® hose glands, Benefits: Stable and corrosion-resistant angle housing made of die-cast zinc, Secure cable entry for gentle cable entry, Can be combined with various screw connections, e.g. sealing, strain relief, kink protection, hose or earthing screw connections, Mounted O-ring enables a protection class of at least IP 55 due to the secure seal to the angle housing The screw connection used in the product is decisive for the protection class of the screw connection combination, Simple, twist-proof flange mounting using 2-4 mounting holes, Thanks to its small size, it is intended for use in confined spaces
Sales unit: 5 pieces
Lieske Part No.: 757277

Angle cable gland SKINDICHT® SE-M 32X1.5, Angle cable gland, M 32, Clamping range (min./max.): 16 - 25 mm, Flange, IP 55, Areas of application: For high mechanical loads, Wherever there is no threaded hole, Benefits: Sealing by means of a cut-in sealing ring, Low installation height, Easy to install, Corrosion-resistant, Absolutely secure cable entry
Lieske Part No.: 1230927

Angle cable gland SKINDICHT® SE-M 32X1.5 WO. E+D, angle cable gland, M 32, halogen-free, flange, , Areas of application: For use with metric SKINTOP®/SKINDICHT® cable glands, For fastening to the outer wall of housings without a thread that only allows one through hole, Withstands high mechanical loads, For use with metric SILVYN® hose glands, Benefits: Stable and corrosion-resistant angle housing made of die-cast zinc, Secure cable entry for gentle cable entry, Can be combined with various screw connections, e.g. sealing, strain relief, kink protection, hose or earthing screw connections, Mounted O-ring enables a protection class of at least IP 55 due to the secure seal to the angle housing The screw connection used in the product is decisive for the protection class of the screw connection combination, Simple, twist-proof flange mounting using 2-4 mounting holes, Thanks to its small size, it is intended for use in confined spaces
Lieske Part No.: 436123

Blind plug SKINTOP® CLICK BLK 16 RAL 7035 LGY, blind plug, bore diameter: 16.3mm, wrench size 1: 22mm, light grey, IP 68 - 5 bar (30 min), areas of application: Blind plug with innovative CLICK system for quick installation in hard-to-reach places. Ideal for quickly closing pre-made, unused bores, measurement, control and electrical engineering, plant and equipment construction, switch cabinet construction, automation technology, benefits: fewer parts, no lock nut required, no thread required, simple, free installation in any position, up to 70% time saving thanks to innovative locking system
Sales unit: 50 pieces
Lieske Part No.: 429748

Blind plug SKINTOP® CLICK BLK 20 RAL 7035 LGY, blind plug, bore diameter: 20.3mm, wrench size 1: 27mm, light grey, IP 68 - 5 bar (30 min), areas of application: Blind plug with innovative CLICK system for quick installation in hard-to-reach places. Ideal for quickly closing pre-made, unused bores, measurement, control and electrical engineering, plant and equipment construction, switch cabinet construction, automation technology, benefits: fewer parts, no lock nut required, no thread required, simple, free installation in any position, up to 70% time saving thanks to innovative locking system
Sales unit: 25 pieces
Lieske Part No.: 622846

Blind plug SKINTOP® CLICK BLK 25 RAL 7035 LGY, blind plug, bore diameter: 25.3mm, wrench size 1: 32mm, light grey, IP 68 - 5 bar (30 min), areas of application: Blind plug with innovative CLICK system for quick installation in hard-to-reach places. Ideal for quickly closing pre-made, unused bores, measurement, control and electrical engineering, plant and equipment construction, switch cabinet construction, automation technology, benefits: fewer parts, no lock nut required, no thread required, simple, free installation in any position, up to 70% time saving thanks to innovative locking system
Sales unit: 25 pieces
Lieske Part No.: 837679

Cable gland SKINTOP® MS-M ATEX BRUSH 25X1.5, cable gland, M 25, clamping range (min./max.): 9 - 17 mm, wrench size 1: 29, nickel-plated brass, UV-resistant, IP 68 - 10 bar (30 min), IP 66, use in Ex areas, EMC shielding, areas of application: Withstands high chemical and mechanical stress,For device group II, category 2G and 1D,For use on devices, machines and systems with ignition protection type 'Increased Safety' ('e'),Especially in Ex areas of the chemical and petrochemical industry,For EMC-compliant introduction of copper-shielded cables, Benefits: Approval for the potentially explosive area according to ATEX Directive 2014/34/EU,Safe, quick and uncomplicated installation,Reliable EMC protection is guaranteed even after dismantling and reinstallation, as the Copper shielding braid is not damaged by the brass brush,Best possible sealing enables protection class IP 68 (10 bar),Optimal EMC protection through unique 360° brass brush, which creates a low-resistance contact between copper shielding braid and screw connection
Sales unit: 10 pieces
Lieske Part No.: 461965

Cable gland SKINTOP® MS-M ATEX BRUSH 63X1.5, cable gland, M 63, clamping range (min./max.): 34 - 45 mm, wrench size 1: 67, nickel-plated brass, UV-resistant, IP 68 - 10 bar (30 min), IP 66, use in Ex areas, EMC shielding, areas of application: Withstands high chemical and mechanical stress,For device group II, category 2G and 1D,For use on devices, machines and systems with the ignition protection type 'Increased Safety' ('e'),Especially in Ex areas of the chemical and petrochemical industry,For EMC-compliant introduction of copper-shielded cables, Benefits: Approval for the potentially explosive area according to ATEX Directive 2014/34/EU,Safe, quick and uncomplicated installation,Reliable EMC protection guaranteed even after dismantling and reinstallation, as the copper shielding braid is not damaged by the brass brush,Best possible sealing enables protection class IP 68 (10 bar),Optimal EMC protection through unique 360° brass brush, which creates a low-resistance contact between the copper shielding braid and the screw connection
Lieske Part No.: 652904

Cable gland SKINTOP® MS-XL PG 9, cable gland, PG 9, clamping range (min./max.): 4 - 8 mm, wrench size 1: 17, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Mechanical and apparatus engineering,With long connection thread for applications with thicker walls,Measurement and control technology,Chemical industry,In areas with high demands on special mechanical, chemical stability, Benefits: Especially for thick walls,Optimal strain relief,High functional reliability,Large, variable clamping ranges
Sales unit: 100 pieces
Lieske Part No.: 439793

Cable gland SKINTOP® MS-XL PG 11, cable gland, PG 11, clamping range (min./max.): 4 - 10 mm, wrench size 1: 20, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Mechanical and equipment engineering,With long connection thread for applications with thicker walls,Measurement and control technology,Chemical industry,In areas with high demands on special mechanical, chemical stability, Benefits: Especially for thick walls,Optimal strain relief,High functional reliability,Large, variable clamping ranges
Sales unit: 50 pieces
Lieske Part No.: 439777

Cable gland SKINTOP® MS-XL PG 13.5, cable gland, PG 13.5, clamping range (min./max.): 5 - 12 mm, wrench size 1: 22, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Mechanical and apparatus engineering,With long connection thread for applications with thicker walls,Measurement and control technology,Chemical industry,In areas with high demands on special mechanical, chemical stability, Benefits: Especially for thick walls,Optimal strain relief,High functional reliability,Large, variable clamping ranges
Sales unit: 50 pieces
Lieske Part No.: 439784

Cable gland SKINTOP® MS-XL PG 16, cable gland, PG 16, clamping range (min./max.): 8 - 14 mm, wrench size 1: 24, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Mechanical and apparatus engineering,With long connection thread for applications with thicker walls,Measurement and control technology,Chemical industry,In areas with high demands on special mechanical, chemical stability, Benefits: Especially for thick walls,Optimal strain relief,High functional reliability,Large, variable clamping ranges
Sales unit: 50 pieces
Lieske Part No.: 1231012

Cable gland SKINTOP® MS-XL PG 21, cable gland, PG 21, clamping range (min./max.): 11 - 18 mm, wrench size 1: 30, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Mechanical and apparatus engineering,With long connection thread for applications with thicker walls,Measurement and control technology,Chemical industry,In areas with high demands on special mechanical, chemical stability, Benefits: Especially for thick walls,Optimal strain relief,High functional reliability,Large, variable clamping ranges
Sales unit: 25 pieces
Lieske Part No.: 439785

Cable gland SKINTOP® MS-XL PG 29, cable gland, PG 29, clamping range (min./max.): 16 - 25 mm, wrench size 1: 40, nickel-plated brass, UV-resistant, IP 68 - 5 bar (30 min), , Areas of application: Mechanical and apparatus engineering,With long connection thread for applications with thicker walls,Measurement and control technology,Chemical industry,In areas with high demands on special mechanical, chemical stability, Benefits: Especially for thick walls,Optimal strain relief,High functional reliability,Large, variable clamping ranges
Sales unit: 25 pieces
Lieske Part No.: 1312345

Sealing ring SKINDICHT® O-RING M12 (9X2) FKM, sealing ring, M 12, inner diameter: 9mm, outer diameter: 13mm, fluororubber, FKM, green, areas of application: For secure sealing to the housing, protection against oil, acids, chemicals on the connection thread of a screw connection, or similar parts under extreme conditions, benefits:
Sales unit: 100 pieces
Lieske Part No.: 440260

Sealing ring SKINDICHT® O-RING M20 (17X2) FKM, sealing ring, M 20, inner diameter: 17mm, outer diameter: 21mm, fluororubber, FKM, green, areas of application: For secure sealing to the housing, protection against oil, acids, chemicals on the connection thread of a screw connection, or similar parts under extreme conditions, benefits:
Sales unit: 100 pieces
Lieske Part No.: 440261

Type: SKINTOP CUBE FRAME 16
Sales unit: 1 pc
Lieske Part No.: 396080

Multiple entry SKINTOP® CUBE FRAME 24, Multiple entry, Number of cable entries: 1, UV-resistant, , Areas of application: Suitable for outdoor use, Can be used in dry, damp and oily environments, For sealing and strain-relieving multiple entry of pre-assembled and non-assembled cables through a housing, For use with the SKINTOP® CUBE MODULE quick-release modules, Benefits: Easy installation using 4 fastening screws, UL/CSA certification in accordance with the technical data enables the product to be used in North America, Multiple entry of cables enables higher packing density (up to 10 cables depending on the variant), Integrated flat seal enables secure sealing to the housing when filled (protection class IP 64), Modular system simplifies service work as individual cables can be flexibly replaced without removing the frame from the housing, Available in two sizes for 16- or 24-pin connector mounting cutouts, Made from Robust polyamide (flammability class HB according to UL94 test method for the flammability of plastics)
Lieske Part No.: 887297

Multiple entry SKINTOP® CUBE MODULE 20X20 SMALL, Multiple entry, Number of cable entries: 1, IP 64, UV-resistant, Halogen-free, Areas of application: Suitable for outdoor use, Can be used in dry, damp and oily environments, For sealing and strain-relieving multiple entry of pre-assembled and non-assembled cables through a housing, For use with the fixed frame SKINTOP® CUBE FRAME, Benefits: UL/CSA certification in accordance with the technical data enables the product to be used in North America, Quick-release modules are divisible and can therefore be easily clamped around the pre-assembled cable, Modular system simplifies service work, as individual cables can be flexibly replaced by removing the quick-release modules using a screwdriver, Patented sealing system enables protection class IP 64, Vibration-proof locking in the appropriate frame, Available in various sizes, with variable clamping areas for different cable outer diameters as well as clamping areas especially for AS-I bus cables, Made of robust polypropylene (flammability class V-0 according to UL94 test method for the flammability of plastics)
Sales unit: 5 pieces
Lieske Part No.: 928962

Type: SKINTOP CUBE MODULE 20X20 LARGE
Sales unit: 5 pc
Sales unit: 5 pieces
Lieske Part No.: 675369