Triton RUA-12-AS6-BAX-A1
48,3 cm ( 19 inch ) Wandgehäuse, Wandschrank einteilig 12HE/595mm, abnehmbare Seitenwände, Vollglastür, schwarz content_copy

RUA wall-mounted cabinet is one of the one-sectioned wall-mounted cabinets. Thanks to removable side panels, installed devices are very easily accessible. Das Gehäuse verfügt über eine robuste Schweißkonstruktion. Die hohe Verarbeitungsqualität und neueste Technologien gewährleisten sein tolles Aussehen. Cabinet has a robust welded construction. High quality processing and the up-to-date technology ensure a perfect look of the cabinet and maximal loading capacity of 30 kg. Cabinet door is glass standardly but it can be steel or perforated as required. The hinge system enables almost 180° wide opening of the door. Doors can be easily removed. REMOVABLE SIDE PANELS: Removable side plates enable access to the installed devices from the rear side without demounting. Blanking panels for installation of cooling ventilators: RUA has now in its all versions six break-out blanking panels for installation of cooling ventilators RAX-CH-X07-X9 (three are in the upper and three in the lower part of a cabinet). RUA cabinet enables installation of devices that could not be cooled sufficiently in wall-mounted cabinets in the past and therefore had to be installed into free-standing cabinets only. ADJUSTABLE VERTICAL RAILS: One pair of vertical 48,3 cm ( 19 inch ) rails is freely adjustable in any depth of the cabinet. This simplifies mounting of the device and organisation of connecting cables. BREAKOUT-TYPE BLANKING PANELS: Cable openings covered with breakout-type blanking panels are ready in the top, bottom and rear part of the cabinet. Use a plastic frame and a blanking panel with a brush, that are parts of the cabinet supply, to seal the cabinet opening against dust penetration.
DESCRIPTION, PURPOSE OF USE
48,3 cm ( 19 inch ) one-sectioned wall-mounted cabinet with IP30 protection
Removable side panels secured by locks
Cabinet is to be hanged right on the wall
Cabinet includes two sliding vertical rails
Cabinet construction: Welded frame with removable side panels secured by locks Safety hardened glass door, thickness 4 mm. On demand may be metal or perforated
Max. permissible load of the door is 10 kg
Min. thickness of the surface fi nish is 65 micrometer
Cabinets are intended for installation of data and telecommunication devices and their distribution systems
The frame of the cabinet and all the removable parts are connected with earthing cables that have to be properly fixed and inserted into connectors during all the time when using the cabinet
There is one M8 screw placed on the bottom part of the cabinet as an earthing main point
Cable openings covered with breakout-type blanking panels are placed in the top and the bottom part of the cabinet rear side, others are in the top and the bottom side of cabinet
There are several openings in the top and bottom part of the cabinet which allow to install ventilation units and which are covered with break-out blanking panels
OPERATION CONDITIONS
Operation environment:Office
The cabinet is not intended for outdoor installations and for installations in environment that can influence negatively the functionality of the cabinet and the mounted devices (e.g. environment with danger of explosion or humid and wet surroundings)
Must be protected against:Mechanical damage
Improper manipulation
A different usage than the cabinet is intended for
Improper manipulation is especially:Overloading (maximum recommended load exceeding)
Device installation that can influence negatively operation and function of the cabinet or the installed equipment
Change of the construction or design of the cabinet
INSTALLATION OF THE CABINETThis type of cabinet is to be hanged right on the wall using screws, wall plugs and washers (included in the supply). Spacing of mounting holes is showed and indicated as "R" in the cabinet scheme
To secure the maximum recommended load, it is necessary to fix the cabinet on the wall with an appropriate carrying capacity (brick, concrete or similar) and to distribute the installed loading equally
To avoid dust penetration in a case where cables lead through some of the cable openings, you can seal it using a blanking panel with a brush or secure by plastic frame (both are part of the cabinet supply)
ENVIRONMENT PROTECTIONAll parts are made of recyclable materials and after its discard, it is necessary to dispose the cabinet according to valid regulations
Supply includes: 2x key - front door, 4x screw 6x50, 4x washer 6,6, 4x dowel 10, 8x captive nut M6, 1x blanking panel with brush, 8x screw M6x10, 8x plastic washer, 1x plastic frame 300x700mm
Material: Safety hardened glass 5 mm thick, steel sheet
Dimension (HxWxD in mm): 635 x 600 x 595
Door size (HxW in mm): 530 x 530
Net weight: 26,0 kg / Gross weight: 26,3 kg

Technical data
Door width	530mm
Packaging volume	0.2267m³
Recommended maximum load	30kg
Width	600mm
Weight	25.500kg
Width packaging	0.600m
Depth	595mm
Door height	530mm
Length packaging	0.595m
Protection class	IP30
Height unit	12U
Height packaging	0.635m
Height (outside)	635mm
Colour	Black (RAL9005)
Detachable rear panel
Demountable
Detachable side panels

---