Triton 48,3 cm ( 19 inch )cabinet, accessory Breaker bar (rail), 3U content_copy

The Triton circuit breaker strip RAB-JL-X01-A1 is a 48,3 cm ( 19 inch ) accessory module for use in server and network enclosures. It is designed with a 3 U height and serves for mounting circuit breakers, fuses or other modular components in the rack. The device is finished in black (RAL9005) and features an integrated top rail, enabling the mounting of DIN- or top rail-based components. The strip is designed to be disassembled, allowing flexible adaptation to different mounting conditions and module sizes. The installation depth is approximately 8 cm, making it suitable for most standard modules. The rear side of the strip is open, facilitating cable routing and access to the modules.

19 inch technology is the standard in IT and electrical engineering for mounting devices in enclosures. The circuit breaker strip serves as a carrier for protective elements that control and protect the power supply to individual devices or modules. The top rail enables direct mounting of components designed to DIN or top rail standards. The 3 U height corresponds to a standard dimension of 13.5 cm (with 1 U = 4.445 cm), which is sufficient for most circuit breaker modules. The disassemblable construction allows the strip to be divided into individual sections, adapting it to the required number of mounted components.

The circuit breaker strip is designed for use in 48,3 cm ( 19 inch ) racks, particularly in server and network enclosures, where structured power supply and protection functions are required. It is suitable for mounting up to 23 modules, with the exact number depending on the size of the individual modules. The open rear side facilitates cable routing and access to the rear connections of the mounted components. The installation depth of approximately 8 cm is sufficient for most standard modules, although the exact depth of the mounted modules must be considered.

The integrated top rail is a central feature, as it enables the mounting of components according to DIN standards. This includes, for example, circuit breakers, fuses, power supply modules or other electrical components that are mounted on a top rail. The black finish (RAL9005) matches the typical colour scheme of server and network equipment. The disassemblable design offers flexibility during installation, as the strip can be divided into individual sections as needed.

The circuit breaker strip is compatible with a variety of accessories used in 48,3 cm ( 19 inch ) technology. These include, for example, PDU models (Power Distribution Units) such as the PDU ATS Switch 48,3 cm ( 19 inch ) 12xIEC-C13 230V/10A or the PDU Basic 12x IEC-320 outlets 230 V/16 A, which are also mounted in 48,3 cm ( 19 inch ) racks. Mounting is done via the integrated top rail, with the exact fastening method depending on the specific component.

Mounting is performed in a 48,3 cm ( 19 inch ) rack by securing to the vertical mounting holes of the enclosure. The top rail allows direct mounting of the components, with the exact fastening method depending on the specific component. The open rear side facilitates cable routing and access to rear connections. The installation depth of approximately 8 cm is sufficient for most standard modules, although the exact depth of the mounted modules must be considered.

The circuit breaker strip provides structured and secure mounting of circuit breakers and other modular components during operation. The disassemblable construction enables flexible adaptation to different requirements, while the top rail ensures mounting of standard components. The black finish (RAL9005) matches the typical colour scheme of server and network equipment. The 3 U height is sufficient for most circuit breaker modules, with the exact number of mountable modules depending on the size of the individual modules. The open rear side facilitates cable routing and access to the rear connections of the mounted components.

Mounting is performed in a 48,3 cm ( 19 inch ) rack by securing to the vertical mounting holes of the enclosure. The top rail allows direct mounting of the components, with the exact fastening method depending on the specific component. The open rear side facilitates cable routing and access to rear connections. The installation depth of approximately 8 cm is sufficient for most standard modules, although the exact depth of the mounted modules must be considered.

Technical data
Packaging volume	0.0046m³
Height unit	3U
Length packaging	0.485m
Colour	Grey (RAL7035)
Height packaging	0.070m
Width packaging	0.135m
Weight	1.000kg

---