Installation Material from Thomas + Betts

The Ty-Rap steel nose cable tie with integrated mounting hole is available in different versions and sizes with different mounting holes. It can be attached in one user-friendly step using screws, bolts or rivets. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used in the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 100 pieces
Lieske Part No.: 728022

The Ty-Rap steel nose cable tie with integrated mounting hole is available in different versions and sizes with different mounting holes. It can be attached in one user-friendly step using screws, bolts or rivets. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used in the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 500 pieces
Lieske Part No.: 827251

The Ty-Rap steel nose cable tie with integrated mounting hole is available in different versions and sizes with different mounting holes. It can be attached in one user-friendly step using screws, bolts or rivets. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used in the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 100 pieces
Lieske Part No.: 883986

The Ty-Rap steel nose cable tie with integrated mounting hole is available in different versions and sizes with different mounting holes. It can be attached in one user-friendly step using screws, bolts or rivets. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used in the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 50 pieces
Lieske Part No.: 105313

The Ty-Rap steel nose cable tie with expansion anchor and support bracket has the great advantage that fastening and bundling takes place in one step. The expansion anchor enables quick and safe assembly with different wall thicknesses. The support bracket also provides vibration protection. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and safest hold that can be found on the market. The powerful and reliable Ty-Rap can be used in the most adverse conditions such as heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without grid teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 650754

The natural-colored Ty-Rap special cable tie for reopening is suitable for bundling temporary wiring and for pre-assembly. It can be used multiple times, is particularly easy to install and is available in 2 lengths. In addition, no tools are required for this special tie. The powerful and reliable Ty-Rap can be used in adverse conditions such as vibration, heat or cold. A large selection of accessories complements the range.
Sales unit: 100 pieces
Lieske Part No.: 104959

The heat-stabilized version of the Ty-Rap steel nose cable tie made of polyamide 6.6 is ideal for applications in higher temperature ranges. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 422642

The high temperature resistant version of the Ty-Rap steel nose cable tie made of polyamide 4.6 can be used in high temperature areas. This series is therefore ideal for applications in industry, the commercial sector and the automotive industry. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and safest hold that can be found on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without grid teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 116634

The high temperature resistant version of the Ty-Rap steel nose cable tie made of polyamide 4.6 can be used in high temperature areas. This series is therefore ideal for applications in industry, the commercial sector and the automotive industry. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and safest hold that can be found on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without grid teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 116635

The UV-resistant version of the Ty-Rap steel nose cable tie made of black polypropylene has excellent resistance to hot materials and chemicals as well as excellent long-term stability against embrittlement. This series is therefore suitable for applications in outdoor installations, the chemical industry and shipbuilding, among others. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold available on the market. The powerful and reliable Ty-Rap can be used in the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 116636

The UV-resistant version of the Ty-Rap steel nose cable tie made of black polypropylene has excellent resistance to hot materials and chemicals as well as excellent long-term stability against embrittlement. This series is therefore suitable for applications in outdoor installations, the chemical industry and shipbuilding, among others. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold available on the market. The powerful and reliable Ty-Rap can be used in the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 104949

The Ty-Rap steel nose cable tie made of fluoropolymer ETFE is characterized by its high resistance to solvents, chemicals, acids, alkalis, oils and radioactivity. In addition, it does not outgas and is therefore ideal for use in zero gravity. The high-temperature-resistant cable tie is suitable for applications in nuclear power plants, medical technology and chemistry. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and safest hold on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without grid teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 104964

The Ty-Rap steel nose cable tie made of fluoropolymer ETFE is characterized by its high resistance to solvents, chemicals, acids, alkalis, oils and radioactivity. In addition, it does not outgas and is therefore ideal for use in zero gravity. The high-temperature-resistant cable tie is suitable for applications in nuclear power plants, medical technology and chemistry. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and safest hold on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without grid teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 500 pieces
Lieske Part No.: 617872

The Ty-Rap steel nose cable tie made of fluoropolymer ETFE is characterized by its high resistance to solvents, chemicals, acids, alkalis, oils and radioactivity. In addition, it does not outgas and is therefore ideal for use in zero gravity. The high-temperature-resistant cable tie is suitable for applications in nuclear power plants, medical technology and chemistry. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and safest hold on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without grid teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 100 pieces
Lieske Part No.: 105008

The Ty-Rap steel nose cable tie made of fluoropolymer ETFE is characterized by its high resistance to solvents, chemicals, acids, alkalis, oils and radioactivity. In addition, it does not outgas and is therefore ideal for use in zero gravity. The high-temperature-resistant cable tie is suitable for applications in nuclear power plants, medical technology and chemistry. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and safest hold on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without grid teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 100 pieces
Lieske Part No.: 105009

The Ty-Rap steel nose cable tie made of fluoropolymer ETFE is characterized by its high resistance to solvents, chemicals, acids, alkalis, oils and radioactivity. In addition, it does not outgas and is therefore ideal for use in zero gravity. The high-temperature-resistant cable tie is suitable for applications in nuclear power plants, medical technology and chemistry. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and safest hold on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without grid teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 100 pieces
Lieske Part No.: 105010

The Ty-Rap steel nose cable tie made of fluoropolymer ETFE is characterized by its high resistance to solvents, chemicals, acids, alkalis, oils and radioactivity. In addition, it does not outgas and is therefore ideal for use in zero gravity. The high-temperature-resistant cable tie is suitable for applications in nuclear power plants, medical technology and chemistry. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and safest hold on the market. The powerful and reliable Ty-Rap can be used under the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without grid teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Sales unit: 100 pieces
Lieske Part No.: 105011

The Ty-Grip all-plastic cable tie is a Velcro cable tie that is particularly suitable for applications where frequent changes are required. These Velcro cable ties can be processed very quickly and easily without tools. They are available in various lengths for different bundle diameters. In this series, the Velcro cable tie is available with either a locking slot or a fastening loop. Since the cables are not tied over during use, the powerful and reliable Ty-Grip is the ideal partner for special applications and pressure-sensitive cables such as fiber optic cables, telecommunications and network cables. They are easy to open and can therefore be reused. A large selection of accessories completes the range.
Sales unit: 10 pieces
Lieske Part No.: 131702

The Ty-Grip all-plastic cable tie is a Velcro cable tie that is particularly suitable for applications where frequent changes are required. These Velcro cable ties can be processed very quickly and easily without tools. They are available in various lengths for different bundle diameters. In this series, the Velcro cable tie is available with either a locking slot or a fastening loop. Since the cables are not tied over during use, the powerful and reliable Ty-Grip is the ideal partner for special applications and pressure-sensitive cables such as fiber optic cables, telecommunications and network cables. They are easy to open and can therefore be reused. A large selection of accessories completes the range.
Lieske Part No.: 131704

The Ty-Grip all-plastic cable tie is a Velcro cable tie that is particularly suitable for applications where frequent changes are required. These Velcro cable ties can be processed very quickly and easily without tools. They are available in various lengths for different bundle diameters. In this series, the Velcro cable tie is available with either a locking slot or a fastening loop. Since the cables are not tied over during use, the powerful and reliable Ty-Grip is the ideal partner for special applications and pressure-sensitive cables such as fiber optic cables, telecommunications and network cables. They are easy to open and can therefore be reused. A large selection of accessories completes the range.
Sales unit: 10 pieces
Lieske Part No.: 118538

The Ty-Grip all-plastic cable tie is a Velcro cable tie that is particularly suitable for applications where frequent changes are required. These Velcro cable ties can be processed very quickly and easily without tools. They are available in various lengths for different bundle diameters. In this series, the Velcro cable tie is available with either a locking slot or a fastening loop. Since the cables are not tied over during use, the powerful and reliable Ty-Grip is the ideal partner for special applications and pressure-sensitive cables such as fiber optic cables, telecommunications and network cables. They are easy to open and can therefore be reused. A large selection of accessories completes the range.
Lieske Part No.: 118648

The Ty-Grip all-plastic cable tie is a Velcro cable tie that is particularly suitable for applications where frequent changes are required. These Velcro cable ties can be processed very quickly and easily without tools. They are available in various lengths for different bundle diameters. In this series, the Velcro cable tie is available with either a locking slot or a fastening loop. Since the cables are not tied over during use, the powerful and reliable Ty-Grip is the ideal partner for special applications and pressure-sensitive cables such as fiber optic cables, telecommunications and network cables. They are easy to open and can therefore be reused. A large selection of accessories completes the range.
Lieske Part No.: 118652

The Ty-Grip all-plastic cable tie is a Velcro cable tie that is particularly suitable for applications where frequent changes are required. These Velcro cable ties can be processed very quickly and easily without tools. They are available in various lengths for different bundle diameters. In this series, the Velcro cable tie is available with either a locking slot or a fastening loop. Since the cables are not tied over during use, the powerful and reliable Ty-Grip is the ideal partner for special applications and pressure-sensitive cables such as fiber optic cables, telecommunications and network cables. They are easy to open and can therefore be reused. A large selection of accessories completes the range.
Lieske Part No.: 118655

The Ty-Grip all-plastic cable tie is a Velcro cable tie that is particularly suitable for applications where frequent changes are required. These Velcro cable ties can be processed very quickly and easily without tools. They are available in various lengths for different bundle diameters. In this series, the Velcro cable tie is available with either a locking slot or a fastening loop. Since the cables are not tied over during use, the powerful and reliable Ty-Grip is the ideal partner for special applications and pressure-sensitive cables such as fiber optic cables, telecommunications and network cables. They are easy to open and can therefore be reused. A large selection of accessories completes the range.
Lieske Part No.: 118703

The heat-stabilized, UV-resistant version of the Ty-Rap steel nose cable tie made of polyamide 6.6 is suitable for outdoor installations and has the advantage of lower installation temperatures. This series is therefore ideal for OEM applications and maintenance. The corrosion-resistant, anti-magnetic steel nose made of type 316 stainless steel in the cable tie head guarantees the strongest and most secure hold that can be found on the market. The powerful and reliable Ty-Rap can be used in the most adverse conditions such as vibration, heat or cold. The rounded edges and contours of the head and the tie ensure user-friendly handling and prevent the insulation of the cables and lines from being damaged by sharp edges or serrations. In addition, the smooth body without ratchet teeth or grooves reduces the number of overstressed areas. The light nubs on the inside of the band ensure that the tie sits firmly on the cable bundle. A large selection of accessories complements the range.
Lieske Part No.: 116633

The cable clamps with plug-in nose for reopening are easy to handle thanks to the integrated plug-in nose (expansion anchor). Installation is quick and easy. In addition, the ends of the brackets have a grip-friendly shape for easy reopening. These cable clamps are particularly suitable for series production or as a wiring aid. In addition, the TC95 has a two-stage locking mechanism. The high-performance cable clamps complete the product range of our reliable premium cable ties and cover the most frequently requested application possibilities in cable management.
Sales unit: 100 pieces
Lieske Part No.: 323177

The cable clamps with plug-in nose for reopening are easy to handle thanks to the integrated plug-in nose (expansion anchor). Installation is quick and easy. In addition, the ends of the brackets have a grip-friendly shape for easy reopening. These cable clamps are particularly suitable for series production or as a wiring aid. In addition, the TC95 has a two-stage locking mechanism. The high-performance cable clamps complete the product range of our reliable premium cable ties and cover the most frequently requested application possibilities in cable management.
Sales unit: 100 pieces
Lieske Part No.: 919438

The four-entry mounting base features a new design and material for higher stress levels. The flat, ramp-like design saves space and makes it easier to insert the tie. The mounting base also has longer struts (to the edge of the base) for better fastening and a special adhesive mixture for high pull-off forces. For greater strength, the base can also be fastened with two screws. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested applications in cable management.
Sales unit: 1000 pieces
Lieske Part No.: 118733

The two-entry mounting base is available in four material variations. These are natural-colored standard polyamide 6.6, black UV-resistant polyamide 6.6, flame-retardant polyamide 6.6 and the high-quality ETFE fluoropolymer (aquamarine blue) for use in extreme conditions. It is available with a foam-coated adhesive surface made of synthetic polymer, without a self-adhesive surface for screwing or for gluing with 2-component adhesive. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested applications in cable management.
Sales unit: 1000 pieces
Lieske Part No.: 385761

The four-entry wide cable tie mounting base is available with a foam-coated synthetic polymer adhesive surface, without a self-adhesive surface for screwing or gluing with 2-component adhesive. It is available in black UV-resistant or natural colored versions. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested applications in cable management.
Sales unit: 50 pieces
Lieske Part No.: 134822

The flat mounting base is characterized by its low height and easy handling. It is available in a self-adhesive version or for sticking on with 2-component adhesive. The powerful mounting base is available in black UV-resistant or natural-colored versions. It completes the product range of our reliable premium cable ties and covers the most frequently requested application possibilities in cable management.
Sales unit: 1000 pieces
Lieske Part No.: 118784

The mounting base with plug-in nose for surface mounting is particularly quick and easy to handle. The mounting base contains a plug-in nose (expansion anchor) for housings as well as mounting and front panels. The base is also characterized by its flat design. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested application options in cable management.
Sales unit: 100 pieces
Lieske Part No.: 131721

The mounting base with plug-in nose for surface mounting is particularly quick and easy to handle. The mounting base contains a plug-in nose (expansion anchor) for housings as well as mounting and front panels. The base is also characterized by its flat design. The high-performance mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested application options in cable management.
Sales unit: 1000 pieces
Lieske Part No.: 509110

The heavy-duty mounting base for outdoor installations is a stable and durable fastening solution for pipes, hoses and cables outdoors. It is available in several variations. On the one hand, it is available with an integrated dowel for wall mounting. Since the dowel only has to be hammered into a hole, installation is easy. In addition, the dowel, which consists of slatted layers arranged one above the other, ensures greater load-bearing capacity and permanent hold. On the other hand, the base can also be purchased with a support saddle in an ergonomic shape for easy installation. It can be screwed or riveted on. The powerful mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested application possibilities in cable management.
Sales unit: 25 pieces
Lieske Part No.: 118742

The heavy-duty mounting base for outdoor installations is a stable and durable fastening solution for pipes, hoses and cables outdoors. It is available in several variations. On the one hand, it is available with an integrated dowel for wall mounting. Since the dowel only has to be hammered into a hole, installation is easy. In addition, the dowel, which consists of slatted layers arranged one above the other, ensures greater load-bearing capacity and permanent hold. On the other hand, the base can also be purchased with a support saddle in an ergonomic shape for easy installation. It can be screwed or riveted on. The powerful mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested application possibilities in cable management.
Sales unit: 25 pieces
Lieske Part No.: 118760

The fastening base for screw mounting for cross bundling is characterized by its particularly low height and its easy handling. With this version, the cable tie is very easy to insert. In addition to screw mounting, the base can also be riveted on. It is equipped with 4 entries for inserting cable ties, which makes cross mounting possible. The powerful fastening base completes the product range of our reliable premium cable ties and covers the most frequently requested application options in cable management.
Sales unit: 100 pieces
Lieske Part No.: 134820

The fastening base for screw mounting in a particularly small and low design is characterized by its easy handling. With this version, the cable tie is very easy to insert. In addition to screw mounting, the base can also be riveted on. The powerful fastening base completes the product range of our reliable premium cable ties and covers the most frequently requested application options in cable management.
Sales unit: 1000 pieces
Lieske Part No.: 597927

The fastening base for screw mounting is characterized by its low height and easy handling. With this version, the cable tie is very easy to insert. In addition to screw mounting, the base can also be riveted on. The powerful fastening base completes the product range of our reliable premium cable ties and covers the most frequently requested application options in cable management.
Sales unit: 1000 pieces
Lieske Part No.: 104676

The cable fastening base with support saddle guarantees high stability thanks to its compact design. The prism-shaped saddle ensures that wires and cables are secured against twisting. In addition, it is non-conductive, corrosion-proof and resistant to fuels, lubricants and most chemicals. The binder base can be screwed or riveted on. It is available in natural or black UV-resistant, heat-stabilized versions. The high-performance fastening base completes the product range of our reliable premium cable ties and covers the most frequently requested applications in cable management.
Sales unit: 500 pieces
Lieske Part No.: 456273

The cable fastening base with support saddle guarantees high stability thanks to its compact design. The prism-shaped saddle ensures that wires and cables are secured against twisting. In addition, it is non-conductive, corrosion-proof and resistant to fuels, lubricants and most chemicals. The binder base can be screwed or riveted on. It is available in natural or black UV-resistant, heat-stabilized versions. The high-performance fastening base completes the product range of our reliable premium cable ties and covers the most frequently requested applications in cable management.
Sales unit: 500 pieces
Lieske Part No.: 110041

The fastening base for screw mounting in a particularly small and low design is characterized by its easy handling. With this version, the cable tie is very easy to insert. In addition to screw mounting, the base can also be riveted on. The powerful fastening base completes the product range of our reliable premium cable ties and covers the most frequently requested application options in cable management.
Sales unit: 1000 pieces
Lieske Part No.: 118761

The mounting base for screw mounting for cross bundling is characterized by its particularly low height and its ease of use. With this version, the cable tie is very easy to insert. In addition to screw mounting, the base can also be riveted. It is equipped with 4 entries for inserting cable ties, which makes cross mounting possible. The mounting base with integrated, angled support is ideal for cables, pipes, lines and hoses. The two mounting holes make the base particularly resilient - it can be screwed or riveted. Parallel, double or cross mounting are possible. It is also particularly suitable for cable harnesses with a large diameter. The powerful mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested application options in cable management.
Sales unit: 1000 pieces
Lieske Part No.: 774269

The fastening base for screw mounting for cross bundling is characterized by its particularly low height and its easy handling. With this version, the cable tie is very easy to insert. In addition to screw mounting, the base can also be riveted on. It is equipped with 4 entries for inserting cable ties, which makes cross mounting possible. The powerful fastening base completes the product range of our reliable premium cable ties and covers the most frequently requested application options in cable management.
Sales unit: 1000 pieces
Lieske Part No.: 721066

The screw-on cable strips enable the simultaneous installation of up to 6 cable bundles or other parts. Installation can be carried out particularly quickly because the cable tie is guided through the cable strip during assembly. In addition, our cable strips are available in several variations. On the one hand, they can be purchased in a flat design, which allows several cable strands to be installed easily and safely at the same time. On the other hand, the cable strip is available with a slot on one side, which leads to more flexibility during installation. There is also a strip for vertical installation and fastening on both sides. The powerful screw-on cable strip completes the product range of our reliable premium cable ties and covers the most frequently requested application possibilities in cable management.
Sales unit: 100 pieces
Lieske Part No.: 622864

Mounting base, cable strips, screw-on, for cable ties width up to 7.6 mm, natural colour, PA 6.6
Sales unit: 100 pieces
Lieske Part No.: 505104

The mounting base with adjustable support saddle is a special design and allows three types of mounting: the simple fastening of cables or other components in the screw base, parallel fastening or cross fastening. The elastic support saddle makes the base suitable for mounting and fastening round components such as cables, electrolytic capacitors or pipes. The powerful mounting base completes the product range of our reliable premium cable ties and covers the most frequently requested application options in cable management.
Sales unit: 100 pieces
Lieske Part No.: 706631

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Lieske Part No.: 105014

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Lieske Part No.: 118798

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Sales unit: 500 pieces
Lieske Part No.: 105311

The standard version of the Ty-Fast all-plastic cable tie is made from halogen- and silicone-free polyamide 6.6. State-of-the-art robot and raw material handling ensure product and material quality throughout the entire manufacturing process. The integrated cable tie nose combines low insertion resistance with high locking force. In addition, the rounded, flat tie heads and the slightly angled tie end with gripping surface ensure easy processing. In addition, the double serration on the cable tie end makes it easier to grip and tighten the tie and prevents the cable tie end from slipping out of the locking head. The Ty-Fast cable ties can therefore be processed quickly and safely, prevent user fatigue, help reduce assembly costs and thus increase productivity. A large selection of accessories complements the range.
Sales unit: 1000 pieces
Lieske Part No.: 795157