Theo Benning 044169 Benning BENNING EV 3-2 measuring adapter testing EVSE charging stations wall boxes

Benning EV 3-2. The test adapter enables the safety and functional testing of AC charging stations (wall boxes) for electric vehicles in accordance with DIN VDE 0100-600 and DIN VDE 0105-100 with the BENNING IT 200/BENNING IT 130 installation tester. Compatible with 1- and 3-phase charging stations (EVSE) of charging mode 3 with type 2 connector. Enables the installation tester to make secure contact with the charging station. Simulates an electric vehicle with different states for the charging station. Rotary switch Proximity Pilot PP (cable simulation): Simulation of different current carrying capacities (codings) of the charging cables. Rotary switch Control Pilot CP (vehicle simulation): Simulation of different vehicle states, such as A (not connected), B (connected, not ready), C (charging without ventilation), D (charging with ventilation) and E (short circuit between CP-PE). Separate phase displays (L1/L2/L3) by three LEDs as soon as the charging station provides energy. Test socket and 4 mm sockets (L1/L2/L3/N/PE) for easy connection to installation tester. BNC connection for measuring the pulse width modulated CP signal of the charging station with an oscilloscope. Checking the EVSE locking system from status B (release of the charging cable is blocked). Plug-in technology other. Material of the insulation material other. Measuring circuit category CAT II. Max. voltage measuring circuit category 300 V. Includes protective bag.
Type: BENNING EV 3-2