Telecom Behnke BT 50-571-IP Speakerphone
|
1.906,71 EUR |
|||||||||||
|
( 2.268,98 EUR incl. VAT ) plus delivery charges |
|||||||||||
| Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline | |||||||||||
| Lieske Part No.: | 678644 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | BT 50-571-IP | ||||||||||
| Weight: | 0.5 kg | ||||||||||
|
Graduated prices net
|
|||||||||||
Further Door Phones from Telecom BehnkeFurther products in category Door Phones
All products of Telecom Behnke
Product information for Telecom Behnke BT 50-571-IP:
50-2006A-IP
Module LC display
• LC display (green) 4 lines of 20 characters each
• Telephone book function (max. 200 entries)
• two buttons for navigation
• one button for selecting and calling the respective participant
• time-controlled or status-dependent Message or information texts
• Connection cable approx. 25 cm
• Incl. anti-twist protection for correct module installation
• Front panel: stainless steel (matt brushed)
• Material thickness: 1.5 mm
• Dimensions (H x W): 90 x 120 mm
• Operating temperature: -20° C to +50° C
50-4910
Module frame, size 4
• Installation option for four modules
• vertical
• Material: aluminum (black anodized)
• Material thickness: 3.5 mm
• Dimensions (H x W x D): 388 x 118 x 3.5 mm
• Order decorative strips made of shiny polished stainless steel separately!
20-0043A-IP
Electronics compact (SIP), size 4
• Basic electronics size 4 for door stations with integrated electronics
• Connection of up to 8 call buttons, 1 touchpad, 1 display, 1 loudspeaker, 1 microphone
• 2 switching relays (max. switching capacity: 2 A / 30VDC, 0.5 A / 40VAC): 1 make contact, 1 changeover contact
• 1 alarm input (input voltage 10 V= to max. 15 V=)
• RJ45 port for 100baseT Ethernet, alternatively via screw terminal (EIA / TIA 568 A)
• Additional RJ45 port for connecting additional IP devices, e.g. B. IP camera (no screw terminals)
• Large housing (possibility of installing an electronics extension)
• Dimensions (H x W x D): 378 x 108 x 72 mm
Electronics: • Voice connection via Voive over IP (VoIP) according to the SIP standard via the connected Ethernet LAN using a SIP-capable telephone system, a SIP provider or direct dialing of an IP address
• Configuration and software updates via web browser
• Power supply: Power over Ethernet (PoE) according to IEEE 802.3af
• Integrated PoE -Switch (VLAN support) for connecting another PoE-capable end device with a maximum power consumption of 7 W
• Full duplex operation (integrated acoustic echo suppression)
• Collective call function / redial
• Status / remote control messages for integration with third-party software
• 9 voice announcements each Can be saved for up to 40 seconds
• 16 MB shared flash memory for phone book and voice prompts
• Configuration can be saved in a file
Technical data
network
• MAC address (IEEE 802.3)
• IPv4 – Internet Protocol Version 4 (RFC 791)
• ARP – Address Resolution Protocol
• DNS – A record (RFC 1706)
• DHCP Client – Dynamic Host Configuration Protocol (RFC 2131)
• TCP – Transmission Control Protocol (RFC 93)
• UDP – User Datagram Protocol (RFC 768)
• RTP – Real Time Protocol (RFC 1889) (RFC 1890)
• RTCP – Real Time Control Protocol (RFC 1889)
• DiffServ (RFC 2475) , Type of Service (RFC 791, RFC 1349)
• SNTP – Simple Network Time Protocol (RFC 2030)
• SIPv2 – Session Initiation Protocol Version 2 (RFC 3261, 3262,3263, 3264)
• SIP in NAT networks (STUN)
• Autoprovisioning via DHCP Option 66 or via configured server
• Backup SIP server configurable
• Firmware update via web interface
• Integrated POE switch with support for tagged VLANs
Language codecs
• G.711 (A-law, µ-law)
• G726 (32 kbps)
• G.721
• DTMF in-band and out-of-band (RFC 2833), SIP info
• Full duplex, echo cancellation (AEC)
• Speaker volume configurable in 10 levels
• Microphone sensitivity configurable in 10 levels
Electrical characteristics
• Power supply via Power over Ethernet (PoE) according to IEEE802.3af
• Max. power consumption: 12 W
• SIP call station: 5 W
• Device on PORT2: max. 7 W
• Max. switching capacity of the relays: 2 A / 30VDC, 0.5 A / 40VAC
• Input voltage alarm input: 10 V to max. 15 V
• Operating temperature: -20° C to + 70°C
50-1100-IP
module loudspeaker, size 3
• Loudspeaker size 3 (large)
• Front panel: stainless steel (matt brushed)
• Material thickness: 1.5 mm
• Dimensions (H x W): 90 x 120 mm
50-2001
Module touch dial block
• Touch dial block with 16 buttons (capacitive)
• Keypad illuminated
• Free dialing possible
• 99 speed dial destinations
• Code lock function (door opener function)
• 1 additional direct call button
• Front panel: stainless steel (matt brushed)
• Material thickness: 1.5 mm
• Dimensions (H x W): 90 x 120 mm
50-3112
Microphone module, 1 button
• Microphone + a call button with labeling field (center)
• Illuminated labeling field
• Shiny polished call button
• Front panel: made of stainless steel (matt brushed)
• Material thickness: 1.5 mm
• Dimensions (H x W): 90 x 120 mm
50-9400
Two clip holders
• Two clip holders (shiny polished) for attaching to the module frame with industrial Velcro
• Material: stainless steel (shiny polished)
Module LC display
• LC display (green) 4 lines of 20 characters each
• Telephone book function (max. 200 entries)
• two buttons for navigation
• one button for selecting and calling the respective participant
• time-controlled or status-dependent Message or information texts
• Connection cable approx. 25 cm
• Incl. anti-twist protection for correct module installation
• Front panel: stainless steel (matt brushed)
• Material thickness: 1.5 mm
• Dimensions (H x W): 90 x 120 mm
• Operating temperature: -20° C to +50° C
50-4910
Module frame, size 4
• Installation option for four modules
• vertical
• Material: aluminum (black anodized)
• Material thickness: 3.5 mm
• Dimensions (H x W x D): 388 x 118 x 3.5 mm
• Order decorative strips made of shiny polished stainless steel separately!
20-0043A-IP
Electronics compact (SIP), size 4
• Basic electronics size 4 for door stations with integrated electronics
• Connection of up to 8 call buttons, 1 touchpad, 1 display, 1 loudspeaker, 1 microphone
• 2 switching relays (max. switching capacity: 2 A / 30VDC, 0.5 A / 40VAC): 1 make contact, 1 changeover contact
• 1 alarm input (input voltage 10 V= to max. 15 V=)
• RJ45 port for 100baseT Ethernet, alternatively via screw terminal (EIA / TIA 568 A)
• Additional RJ45 port for connecting additional IP devices, e.g. B. IP camera (no screw terminals)
• Large housing (possibility of installing an electronics extension)
• Dimensions (H x W x D): 378 x 108 x 72 mm
Electronics: • Voice connection via Voive over IP (VoIP) according to the SIP standard via the connected Ethernet LAN using a SIP-capable telephone system, a SIP provider or direct dialing of an IP address
• Configuration and software updates via web browser
• Power supply: Power over Ethernet (PoE) according to IEEE 802.3af
• Integrated PoE -Switch (VLAN support) for connecting another PoE-capable end device with a maximum power consumption of 7 W
• Full duplex operation (integrated acoustic echo suppression)
• Collective call function / redial
• Status / remote control messages for integration with third-party software
• 9 voice announcements each Can be saved for up to 40 seconds
• 16 MB shared flash memory for phone book and voice prompts
• Configuration can be saved in a file
Technical data
network
• MAC address (IEEE 802.3)
• IPv4 – Internet Protocol Version 4 (RFC 791)
• ARP – Address Resolution Protocol
• DNS – A record (RFC 1706)
• DHCP Client – Dynamic Host Configuration Protocol (RFC 2131)
• TCP – Transmission Control Protocol (RFC 93)
• UDP – User Datagram Protocol (RFC 768)
• RTP – Real Time Protocol (RFC 1889) (RFC 1890)
• RTCP – Real Time Control Protocol (RFC 1889)
• DiffServ (RFC 2475) , Type of Service (RFC 791, RFC 1349)
• SNTP – Simple Network Time Protocol (RFC 2030)
• SIPv2 – Session Initiation Protocol Version 2 (RFC 3261, 3262,3263, 3264)
• SIP in NAT networks (STUN)
• Autoprovisioning via DHCP Option 66 or via configured server
• Backup SIP server configurable
• Firmware update via web interface
• Integrated POE switch with support for tagged VLANs
Language codecs
• G.711 (A-law, µ-law)
• G726 (32 kbps)
• G.721
• DTMF in-band and out-of-band (RFC 2833), SIP info
• Full duplex, echo cancellation (AEC)
• Speaker volume configurable in 10 levels
• Microphone sensitivity configurable in 10 levels
Electrical characteristics
• Power supply via Power over Ethernet (PoE) according to IEEE802.3af
• Max. power consumption: 12 W
• SIP call station: 5 W
• Device on PORT2: max. 7 W
• Max. switching capacity of the relays: 2 A / 30VDC, 0.5 A / 40VAC
• Input voltage alarm input: 10 V to max. 15 V
• Operating temperature: -20° C to + 70°C
50-1100-IP
module loudspeaker, size 3
• Loudspeaker size 3 (large)
• Front panel: stainless steel (matt brushed)
• Material thickness: 1.5 mm
• Dimensions (H x W): 90 x 120 mm
50-2001
Module touch dial block
• Touch dial block with 16 buttons (capacitive)
• Keypad illuminated
• Free dialing possible
• 99 speed dial destinations
• Code lock function (door opener function)
• 1 additional direct call button
• Front panel: stainless steel (matt brushed)
• Material thickness: 1.5 mm
• Dimensions (H x W): 90 x 120 mm
50-3112
Microphone module, 1 button
• Microphone + a call button with labeling field (center)
• Illuminated labeling field
• Shiny polished call button
• Front panel: made of stainless steel (matt brushed)
• Material thickness: 1.5 mm
• Dimensions (H x W): 90 x 120 mm
50-9400
Two clip holders
• Two clip holders (shiny polished) for attaching to the module frame with industrial Velcro
• Material: stainless steel (shiny polished)
Questions & answers
What is the delivery time of Telecom Behnke BT 50-571-IP Speakerphone ?
The article Telecom Behnke BT 50-571-IP Speakerphone is currently in stock
According to our experience the article is ready for dispatch within 3 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Telecom Behnke BT 50-571-IP to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Telecom Behnke BT 50-571-IP Speakerphone always at the best possible price. We can give you a discount of 2% on Telecom Behnke BT 50-571-IP Speakerphone if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduation prizes with every purchase. If you buy a minimum of 2 pieces of Telecom Behnke BT 50-571-IP Speakerphone we can offer you a price of 1.849,51 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
Fitting accessory for Telecom Behnke BT 50-571-IP Speakerphone
 |
Telecom Behnke 20-9596 PoE injector
• to supply an IP station or IP Camera • Output Power: 30W (High Power PoE) IEEE802.3at • Input voltage: 240V AC • Output Power: 30W • Dimensions (L x W x H): 164 x 65 x 36 mm • Operating ... Lieske Part No.: 158897 Mfg Part No: 20-9596 |
63,53 EUR
 plus delivery charges
Delivery time from supplier's stock (ca.) 6 workdaysinfo_outline
|
 |
Telecom Behnke 20-9575 Behnke HSNT power supply 15 V DC, 700 mA for Triphonie rail mounting
DIN rail power supply as the power supply for basic electronics 40-0006 Triphonie. Lieske Part No.: 162162 Mfg Part No: 20-9575 |
45,24 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 6 workdaysinfo_outline
|
 |
Telecom Behnke 20-9585 Behnke Power Supply 15V / 1,2 A
Power supply for various applications, 15 V, 1.2 A. Lieske Part No.: 334668 Mfg Part No: 20-9585 |
43,31 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Telecom Behnke 20-5211 Behnke UP housing size 4
UP-housing size 4 (Size 4 vertically for phones, horizontal). Galvanized sheet steel. External dimensions (H x W x D): 388 x 118 x 85 mm. Dimensions (H x W x D): 360 x 104 x 84 mm. Lieske Part No.: 964172 Mfg Part No: 20-5211 |
51,01 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 6 workdaysinfo_outline
|