Workwear in Safety & Workwear Equipment
Workwear from DEHN
|
Dehn 766941 PSO M8 W45 PHE test probe 45° angled 3...24kV with threaded bolt M8
Test probe, angled at 45° for narrow passages in switchgear. For screwing onto the test tips of the PHE III and PHE voltage testers. Lieske Part No.: 608096 Mfg Part No: 766941 Type: PSO M8 W45 PHE |
564,68 EUR
![]() ≈ £478.85 | ≈ $633.01
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
DEHN 766950 PSO M8 W90 PHE Prüfsonden 90° mit M8 für PHE 3-24 kV
Prüfsonde, 90° abgewinkelt für Schaltanlagen, bei denen das Erreichen der Prüfkontakte über einen Durchlass (Tulpe) nur von unten nach oben möglich ist. Zum Aufschrauben auf die Prüfspitzen der ... Lieske Part No.: 575855 Mfg Part No: 766950 Type: PSO M8 W90 PHE |
456,00 EUR
![]() ≈ £386.69 | ≈ $511.18
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
DEHN 766960 PSO M8 PHE L800 test probes with threaded sleeve/bolt M8 for PHE3-24kV
Long test probe, especially for tower stations and switchgear where the immersion depth must be increased. For screwing onto the test tips of the PHE III and PHE voltage testers. Lieske Part No.: 881013 Mfg Part No: 766960 Type: PSO M8 PHE L800 |
386,17 EUR
![]() ≈ £327.47 | ≈ $432.90
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
DEHN 766994 KKL 92 28 12 Kunststoffkoffer leer für Spannungsprüfer
Kunststoffkoffer mit Alurahmen und Noppenschaum, leer, für Spannungsprüfer und Phasenvergleicher. Lieske Part No.: 581538 Mfg Part No: 766994 Type: KKL 92 28 12 |
290,04 EUR
![]() ≈ £245.95 | ≈ $325.13
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
DEHN 766998 KKL PHE3 60 110 plastic case empty for voltage tester
Plastic case, empty, for PHE III set. With foam insert. Lieske Part No.: 1322951 Mfg Part No: 766998 Type: KKL PHE3 60 110 |
801,80 EUR
![]() ≈ £679.93 | ≈ $898.82
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
DEHN 766999 KKL PHE L plastic case empty for voltage tester
Plastic case, empty, for PHE. With foam insert. Lieske Part No.: 926864 Mfg Part No: 766999 Type: KKL PHE L |
807,40 EUR
![]() ≈ £684.68 | ≈ $905.10
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
DEHN 767107 KKLDCA plastic case 395x295x105 mm for cap
Plastic case, empty, for DEHNcap. With foam insert. Lieske Part No.: 1312497 Mfg Part No: 767107 Type: KKL DCA |
322,24 EUR
![]() ≈ £273.26 | ≈ $361.23
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
DEHN 767122 SPG DCA IT LRM interface test device cap IT-LRM
Electronic, active interface test device DEHNcap/IT-LRM with two separate LED displays according to DIN VDE 0682-415 (EN/IEC 61243-5) for periodic testing of coupling parts on switchgear with HR test ... Lieske Part No.: 1316240 Mfg Part No: 767122 Type: SPG DCA IT LRM |
673,55 EUR
![]() ≈ £571.17 | ≈ $755.05
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
DEHN 767132 PVDCAPCLRM phase comparator cap PC-LRM
Electronic, active phase comparator DEHNcap/PC-LRM with three separate LED displays in accordance with DIN VDE 0682-415 (EN/IEC 61243-5) for determining all-pole phase equilibrium in switchgear with ... Lieske Part No.: 1316239 Mfg Part No: 767132 Type: PV DCA PC LRM |
1.483,62 EUR
![]() ≈ £1,258.11 | ≈ $1,663.14
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
DEHN MA DCA HR LRM test adapter f. DEHNca, 767,133
HR-LRM measuring adapter according to DIN VDE 0682-415 (EN/IEC 61243-5) for mechanical and electrical adaptation of HR (HO) to LRM systems and as measuring impedance with XC = 36 MOhm for repeat ... Lieske Part No.: 558577 Mfg Part No: 767133 Type: MA DCA HR LRM |
195,22 EUR
![]() ≈ £165.55 | ≈ $218.84
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
DEHN hp DCA HR LRM Prüferset DEHNcap HR, Plastic Case 767150
Complete set for determining the absence of voltage, testing the interface and for phase equality in HR and LRM systems in a plastic case, according to DIN VDE 0682-415 (EN/IEC 61243-5) on switchgear ... Lieske Part No.: 406636 Mfg Part No: 767150 Type: PS DCA HR LRM |
3.566,87 EUR
![]() ≈ £3,024.71 | ≈ $3,998.46
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
DEHN 767500 KLT23164 artificial leather case 235x160x40 mm
Artificial leather case, empty, for DEHNcap/PC. With carrying strap. Lieske Part No.: 2054892 Mfg Part No: 767500 Type: KLT 23 16 4 |
129,77 EUR
![]() ≈ £110.04 | ≈ $145.47
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
DEHN ASP 110420 L distance Spannungsprü, 50Hz Cat. L f. 767,571 overhead lines
Distance voltage tester ASP according to E DIN VDE 0682-417 for all-pole determination of the absence of voltage at the work site according to DIN VDE 0105-100 (EN 50110-1) in electrical systems. Lieske Part No.: 691878 Mfg Part No: 767571 Type: ASPS 110 420 L |
2.730,20 EUR
![]() ≈ £2,315.21 | ≈ $3,060.55
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
DEHN 767645 PHEG2 P SN7259 DC voltage tester with positive pole at test tip Un 1,0–12 kV
Resistive, two-leg DC voltage tester PHE/G for switchgear, positive pole on test head, as a combined design based on DIN VDE 0682-411 (EN/IEC 61243-1) for determining the absence of voltage by ... Lieske Part No.: 1326431 Mfg Part No: 767645 Type: PHEG2 P SN7259 |
3.123,41 EUR
![]() ≈ £2,648.65 | ≈ $3,501.34
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
DEHN PHE3S 20 S ZK Spannungsprüferset, 20kV 50Hz Kat.'S' Schaltanl / Freil.767724
Capacitive voltage tester set PHE III as a combined design according to DIN VDE 0682-411 (EN/IEC 61243-1) for all-pole verification of the absence of voltage at the work site according to DIN VDE ... Lieske Part No.: 374214 Mfg Part No: 767724 Type: PHE3S 20 S ZK |
3.470,64 EUR
![]() ≈ £2,943.10 | ≈ $3,890.59
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
DEHN 767740 PHE3620SL voltage tester PHE III 6–20 kV 50 Hz Cat. S/L
Capacitive voltage tester PHE III as a combined design according to DIN VDE 0682-411 (EN/IEC 61243-1) for all-pole verification of the absence of voltage at the work site according to DIN VDE 0105-100 ... Lieske Part No.: 1316235 Mfg Part No: 767740 Type: PHE3 6 20 SL |
2.005,07 EUR
![]() ≈ £1,700.30 | ≈ $2,247.68
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
DEHN 767750 PHE31030SL voltage tester PHE III 10...30kV 50Hz Cat. S/L
Capacitive voltage tester PHE III as a combined design according to DIN VDE 0682-411 (EN/IEC 61243-1) for all-pole verification of the absence of voltage at the work site according to DIN VDE 0105-100 ... Lieske Part No.: 608129 Mfg Part No: 767750 Type: PHE3 10 30 SL |
2.014,86 EUR
![]() ≈ £1,708.60 | ≈ $2,258.66
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
DEHN S61 PS PHE 435 Probe S61 f. PH, 767 761
Test probe with integrated test electrode for voltage testers PHE III and PHE. Category ' S ' for switchgear and overhead lines. Lieske Part No.: 204357 Mfg Part No: 767761 Type: S61 PS PHE 435 |
327,65 EUR
![]() ≈ £277.85 | ≈ $367.30
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
DEHN 767762 Our concern S62 PS PHE 620 probe S 62, 767,762
Test probe with integrated test electrode for voltage testers PHE III and PHE. Category ' S ' for switchgear and overhead lines. Lieske Part No.: 605164 Mfg Part No: 767762 Type: S62 PS PHE 620 |
354,35 EUR
![]() ≈ £300.49 | ≈ $397.23
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
DEHN 767764 S64 PS PHE 880 test probe S64 PHE III 915 mm
Test probe with integrated test electrode for voltage testers PHE III and PHE. Category ' S ' for switchgear and overhead lines. Lieske Part No.: 1322950 Mfg Part No: 767764 Type: S64 PS PHE 880 |
447,55 EUR
![]() ≈ £379.52 | ≈ $501.70
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Dehn FSG PHG2 PHV fall protection rubber testing devices PHV/PHG II
Fall protection rubber for PHG II and PHV. Lieske Part No.: 608163 Mfg Part No: 767777 Type: FSG PHG2 PHV |
11,21 EUR
![]() ≈ £9.51 | ≈ $12.57
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
DEHN 767910 PHE310SZK voltage tester PHEIII 10 kV 50 Hz Cat. S with tooth coupling
Capacitive voltage tester PHE III as a combined design according to DIN VDE 0682-411 (EN/IEC 61243-1) for all-pole verification of the absence of voltage at the work site according to DIN VDE 0105-100 ... Lieske Part No.: 1320332 Mfg Part No: 767910 Type: PHE3 10 S ZK |
1.846,13 EUR
![]() ≈ £1,565.52 | ≈ $2,069.51
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
DEHN 767921 PHE3 PK6 20 S SB ZK test head 6–20 kV 50 Hz category S with standby function
Capacitive voltage tester PHE III as separate design according to DIN VDE 0682-411 (EN/IEC 61243-1) for all-pole verification of the absence of voltage at the work site according to DIN VDE 0105-100 ... Lieske Part No.: 2054893 Mfg Part No: 767921 Type: PHE3 PK6 20 S SB ZK |
1.920,04 EUR
![]() ≈ £1,628.19 | ≈ $2,152.36
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
DEHN 767930 PHE330SZK Spannungsprüfer PHE III 30 kV 50 Hz Kat. S mit Zahnkupplung
Kapazitiver Spannungsprüfer PHE III als zusammengehörige Bauart nach DIN VDE 0682-411 (EN/IEC 61243-1) zum allpoligen Feststellen der Spannungsfreiheit an der Arbeitsstelle nach DIN VDE 0105-100 (EN ... Lieske Part No.: 506619 Mfg Part No: 767930 Type: PHE3 30 S ZK |
1.862,86 EUR
![]() ≈ £1,579.71 | ≈ $2,088.27
Made to order · Delivery time approx. 20 workdaysinfo_outline
|























