Miscellaneous in Tools
Miscellaneous from KLAUKE
 |
 KLAUKE 50040634 die 50,040,634 61.5 mm, Slug-Buster for gap-punchers
For quick, clean, effortless and burr-free punching. Punch waste pieces are split and can be easily removed. Suitable for sheet steel (St37), plastic and aluminum. Manual and hydraulic operation.Lieske Part No.: 889610 Mfg Part No: 50040634 |
70,98 EUR
 plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50041754 Standard stamp 74mm steel (ST37) 3mm
Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 1580578 Mfg Part No: 50041754 |
160,18 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50041770 standard die 74mm steel (ST37) 3mm
Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 1580577 Mfg Part No: 50041770 |
111,92 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50041878 ball bearing nut ,
Single part for manual operation of sheet metal punches. 19mm Lieske Part No.: 833719 Mfg Part No: 50041878 |
105,44 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50041886 lag screw 19,0 x140mm 50,041,886, with ball bearings for manual operation
High wear resistance. To increase service life, we recommend greasing the tension screws with Greenlee assembly paste no. 50115472. Dimensions in diameter x length, tolerance deviations are reserved. Lieske Part No.: 760343 Mfg Part No: 50041886 |
59,60 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50042351 standard template 12.7mm, PG7 PG7 Knockout
Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 816874 Mfg Part No: 50042351 |
15,64 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50042459 Stamp 54.0mm Standard Knockout
Standard sheet metal punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter of 9.7mm ... Lieske Part No.: 280941 Mfg Part No: 50042459 |
66,03 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50042467 Standard Matrize 69,9mm Stahl(ST37) 3mm
Standard Blechlocher System. Geeignet für Stahlblech (ST37), Kunststoff und Aluminium. Blechlocher für manuelle und hydraulische Betätigung. Für die Verwendung des Zugbolzen 9,5mm muss das Loch ... Lieske Part No.: 492152 Mfg Part No: 50042467 |
104,45 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
KLAUKE 50042475 Standard Stempel 69,9mm Stahl(ST37) 3mm
Standard Blechlocher System. Geeignet für Stahlblech (ST37), Kunststoff und Aluminium. Blechlocher für manuelle und hydraulische Betätigung. Für die Verwendung des Zugbolzen 9,5mm muss das Loch ... Lieske Part No.: 492153 Mfg Part No: 50042475 |
128,11 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50042483 Standard stamp 47,6mm, Knockout
Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 472513 Mfg Part No: 50042483 |
60,44 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50042491 standard template 47,6mm, Knockout
Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 548487 Mfg Part No: 50042491 |
51,78 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50042521 Standard stamp 66.7mm steel (ST37) 3mm
Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 373908 Mfg Part No: 50042521 |
128,11 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50042564 Standard die 44.5mm Knockout
Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 703631 Mfg Part No: 50042564 |
39,95 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50042572 Standard Stamp 44.5mm Knockout
Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 703652 Mfg Part No: 50042572 |
53,46 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50046136 die 64.0 mm, 50,046,136 Slug splitter ISO 63
Long product life. Less effort due to simple application - punching waste pieces are split and can be easily removed. Suitable for stainless steel (V2A), sheet steel (St37), plastic and aluminum. Lieske Part No.: 210989 Mfg Part No: 50046136 |
145,63 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50046144 stamp 64.0mm, ISO 63 50,046,144 Slug Splitter
Long product life. Less effort due to simple application - punching waste pieces are split and can be easily removed. Suitable for stainless steel (V2A), sheet steel (St37), plastic and aluminum. Lieske Part No.: 330912 Mfg Part No: 50046144 |
460,15 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50046381 lock nut , for square holes
Accessories for Sub-Min-D hole punches. Lieske Part No.: 941819 Mfg Part No: 50046381 |
-5% 25,05 EUR 26,38 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50046861 reducing bushing
Accessories for standard sheet metal punch systems. Lieske Part No.: 1232226 Mfg Part No: 50046861 |
67,82 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50052152 Offset tool ,
Accessories for busbar machining center. Workpiece offset 5, 6, 8, 10 and 12 mm by using the insert plates. Suitable for materials AI/Cu max. 120 x 12 mm. Lieske Part No.: 278600 Mfg Part No: 50052152 |
2.099,88 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50052241 busbar processing tool
Type: 50052241 Sales unit: 1 pc Lieske Part No.: 694879 Mfg Part No: 50052241 |
16.011,30 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50052349 slot insert 6.5x13mm hole tool I Al/Cu rails up to 12mm
Hole insert for hole tool I. Suitable for Al/Cu solid rails up to max. 12 mm and steel up to 10 mm material thickness. 6.5 x 13 mm Lieske Part No.: 640845 Mfg Part No: 50052349 |
594,97 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50052357 slot use for hole tool 8,5 x16mm
Hole insert for hole tool I. Suitable for Al/Cu solid rails up to max. 12 mm and steel up to 10 mm material thickness. 8.5 x 16 mm Lieske Part No.: 203846 Mfg Part No: 50052357 |
594,97 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50052365 slot use for hole tool 11,0 x20mm
Hole insert for hole tool I. Suitable for Al/Cu solid rails up to max. 12 mm and steel up to 10 mm material thickness. 11.0 x 20 mm Lieske Part No.: 889295 Mfg Part No: 50052365 |
594,97 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50052373 slot use for hole tool 13,0 x20mm
Hole insert for hole tool I. Suitable for Al/Cu solid rails up to max. 12 mm and steel up to 10 mm material thickness. 13.0 x 20 mm Lieske Part No.: 147092 Mfg Part No: 50052373 |
594,97 EUR
plus delivery charges
Delivery time on requestinfo_outline
|