Miscellaneous in Tools

Miscellaneous from Klauke

Klauke 50031708 threaded bushing 28,6 x 76 mm 03170, hydraulic actuation Accessories for standard sheet metal punch systems. For 19mm draw bolts to 28.6mm

Lieske Part No.: 854848
Mfg Part No: 50031708

80,88 EUR

plus delivery charges

Delivery time on request

KLAUKE 50040111 die 50,040,111 34.6 mm, Slug-Buster For quick, clean, effortless and burr-free punching. Punch waste pieces are split and can be easily removed. Suitable for sheet steel (St37), plastic and aluminum. Manual and hydraulic operation.

Lieske Part No.: 573596
Mfg Part No: 50040111

-5% 28,41 EUR 29,94 EUR

plus delivery charges

Delivery time on request

Klauke 50040138 Slug-Buster die 43.2mm max. steel 3mm For quick, clean, effortless and burr-free punching. Punch waste pieces are split and can be easily removed. Suitable for sheet steel (St37), plastic and aluminum. Manual and hydraulic operation.

Lieske Part No.: 424803
Mfg Part No: 50040138

39,95 EUR

plus delivery charges

Delivery time on request

Klauke 50040405 tension screw 19x55mm with ball bearing High wear resistance. To increase service life, we recommend greasing the tension screws with Greenlee assembly paste no. 50115472. Dimensions in diameter x length, tolerance deviations are reserved.

Lieske Part No.: 460693
Mfg Part No: 50040405

33,07 EUR

plus delivery charges

Delivery time on request

Klauke 50040588 Standard Stamp 57.2mm Knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ...

Lieske Part No.: 1232228
Mfg Part No: 50040588

75,88 EUR

plus delivery charges

Delivery time on request

Klauke 50040596 standard die 57.2mm knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ...

Lieske Part No.: 1232227
Mfg Part No: 50040596

67,82 EUR

plus delivery charges

Delivery time on request

KLAUKE 50040618 die 50,040,618 49.6 mm, Slug-Buster for gap-punchers For quick, clean, effortless and burr-free punching. Punch waste pieces are split and can be easily removed. Suitable for sheet steel (St37), plastic and aluminum. Manual and hydraulic operation.

Lieske Part No.: 767441
Mfg Part No: 50040618

50,14 EUR

plus delivery charges

Delivery time on request

KLAUKE 50040634 die 50,040,634 61.5 mm, Slug-Buster for gap-punchers For quick, clean, effortless and burr-free punching. Punch waste pieces are split and can be easily removed. Suitable for sheet steel (St37), plastic and aluminum. Manual and hydraulic operation.

Lieske Part No.: 889610
Mfg Part No: 50040634

70,98 EUR

plus delivery charges

Delivery time on request

Klauke 50041754 Standard stamp 74mm steel (ST37) 3mm Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ...

Lieske Part No.: 1580578
Mfg Part No: 50041754

160,18 EUR

plus delivery charges

Delivery time on request

Klauke 50041770 standard die 74mm steel (ST37) 3mm Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ...

Lieske Part No.: 1580577
Mfg Part No: 50041770

111,92 EUR

plus delivery charges

Delivery time on request

Klauke 50041878 ball bearing nut , Single part for manual operation of sheet metal punches. 19mm

Lieske Part No.: 833719
Mfg Part No: 50041878

105,44 EUR

plus delivery charges

Delivery time on request

KLAUKE 50041886 lag screw 19,0 x140mm 50,041,886, with ball bearings for manual operation High wear resistance. To increase service life, we recommend greasing the tension screws with Greenlee assembly paste no. 50115472. Dimensions in diameter x length, tolerance deviations are reserved.

Lieske Part No.: 760343
Mfg Part No: 50041886

59,60 EUR

plus delivery charges

Delivery time on request

KLAUKE 50042351 standard template 12.7mm, PG7 PG7 Knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ...

Lieske Part No.: 816874
Mfg Part No: 50042351

15,64 EUR

plus delivery charges

Delivery time on request

Klauke 50042459 Stamp 54.0mm Standard Knockout Standard sheet metal punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter of 9.7mm ...

Lieske Part No.: 280941
Mfg Part No: 50042459

66,03 EUR

plus delivery charges

Delivery time on request

KLAUKE 50042467 Standard Matrize 69,9mm Stahl(ST37) 3mm Standard Blechlocher System. Geeignet für Stahlblech (ST37), Kunststoff und Aluminium. Blechlocher für manuelle und hydraulische Betätigung. Für die Verwendung des Zugbolzen 9,5mm muss das Loch ...

Lieske Part No.: 492152
Mfg Part No: 50042467

104,45 EUR

plus delivery charges

Delivery time on request

KLAUKE 50042475 Standard Stempel 69,9mm Stahl(ST37) 3mm Standard Blechlocher System. Geeignet für Stahlblech (ST37), Kunststoff und Aluminium. Blechlocher für manuelle und hydraulische Betätigung. Für die Verwendung des Zugbolzen 9,5mm muss das Loch ...

Lieske Part No.: 492153
Mfg Part No: 50042475

128,11 EUR

plus delivery charges

Delivery time on request

Klauke 50042483 Standard stamp 47,6mm, Knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ...

Lieske Part No.: 472513
Mfg Part No: 50042483

60,44 EUR

plus delivery charges

Delivery time on request

Klauke 50042491 standard template 47,6mm, Knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ...

Lieske Part No.: 548487
Mfg Part No: 50042491

51,78 EUR

plus delivery charges

Delivery time on request

Klauke 50042521 Standard stamp 66.7mm steel (ST37) 3mm Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ...

Lieske Part No.: 373908
Mfg Part No: 50042521

128,11 EUR

plus delivery charges

Delivery time on request

Klauke 50042564 Standard die 44.5mm Knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ...

Lieske Part No.: 703631
Mfg Part No: 50042564

39,95 EUR

plus delivery charges

Delivery time on request

Klauke 50042572 Standard Stamp 44.5mm Knockout Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ...

Lieske Part No.: 703652
Mfg Part No: 50042572

53,46 EUR

plus delivery charges

Delivery time on request

KLAUKE 50046136 die 64.0 mm, 50,046,136 Slug splitter ISO 63 Long product life. Less effort due to simple application - punching waste pieces are split and can be easily removed. Suitable for stainless steel (V2A), sheet steel (St37), plastic and aluminum.

Lieske Part No.: 210989
Mfg Part No: 50046136

145,63 EUR

plus delivery charges

Delivery time on request

KLAUKE 50046144 stamp 64.0mm, ISO 63 50,046,144 Slug Splitter Long product life. Less effort due to simple application - punching waste pieces are split and can be easily removed. Suitable for stainless steel (V2A), sheet steel (St37), plastic and aluminum.

Lieske Part No.: 330912
Mfg Part No: 50046144

460,15 EUR

plus delivery charges

Delivery time on request

KLAUKE 50046381 lock nut , for square holes Accessories for Sub-Min-D hole punches.

Lieske Part No.: 941819
Mfg Part No: 50046381

-5% 25,05 EUR 26,38 EUR

plus delivery charges

Delivery time on request

1 5 10 15 20 25 30 35 40 42 44 45 46 47 48 49 50 51 52 53 54 55 57 59 60 .. 70 .. 80 .. 90 .. 100 .. 110 .. 118