Electrical Insulation from Baaske Medical
You have been filtering for Baaske Medical and therefore you see now only Electrical Insulation from Baaske Medical .
You can choose other manufacturers on the left side in the menu or get the complete overview.
Electrical Insulation from Baaske Medical
 |
 Baaske Medical 2005422 RS232 9Pin fiber optic isolator STD RL - VE 2 pcs / pack
RS232 9Pin RL fiber insulator STD Connection: 1 x 9pin SubD socket. EQUIVALENT and cable assembly required. Combined with item number 2005421 & 2005422baud rate: 110 - 115200 Signal lines: RxD ... Lieske Part No.: 378179 Mfg Part No: 2005422 |
189,46 EUR
 plus delivery charges
Delivery time from supplier's stock (ca.) 4 workdaysinfo_outline
|
 |
Baaske Medical 2005532 RS232 isolator STD fiber optic cable
RS232 Isolator STD Fiber Optic Cable The pre-assembled fiber optic cable for RS232 isolators is ideal for interference-free data transmission in environments where electrical isolation is necessary. Lieske Part No.: 152594 Mfg Part No: 2005532 |
5,81 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 4 workdaysinfo_outline
|
 |
Baaske Medical 2005674 Network Isolator MED MI 1005 Retail
Network Isolator MED MI 1005 Retail - Speed ​​10/100/1000 Mbit / s - Full compatibility with IEEE 802.3 - Standard certificate from the notified body in accordance with EN ... Lieske Part No.: 683508 Mfg Part No: 2005674 |
99,09 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Baaske Medical 2005674 Network Isolator MED MI 1005 Retail - 10 pcs pack
Network Isolator MED MI 1005 Retail - Speed ​​10/100/1000 Mbit / s - Full compatibility with IEEE 802.3 - Standard certificate from the notified body in accordance with EN ... Lieske Part No.: 968634 Mfg Part No: 2005674 |
856,32 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 4 workdaysinfo_outline
|
 |
Baaske Medical 2006633 MI 1005 E galvanic isolation to the network installation
The technology is based on the MI 1005E 10,000-proven technology of the world Brought to use MI 1005. In contrast to the MI 1005 Medical insulator MI 1005E is suitable for installation in housing. Lieske Part No.: 529561 Mfg Part No: 2006633 |
90,02 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 12 workdaysinfo_outline
|
If a device is connected via an isolating transformer, fault currents are no longer being discharged via the ground wire. Therefore residual current operated circuit breaker are no longer working properly. With the insulation monitoring devices offered by us, potential insulation failures can be detected and set off an alarm.
In this category you will also find products for an additional potential equalization. A distinction is made between the stationary mounted "general" potential equalization according to DIN VDE 0100 part 410 and 540 and the additional potential equalization for mobile active and non-active medical products, that has to be connected via a flexible conduct with a special plug, according to VDE 0107 (old) and VDE 0100 part 710 (new).
Please also take a look at our medical technology information page.