SITECO 53BM812MV4CXD2 Modario 31 Gen.2 lighting insert, LED, 12.350 lm, 840
|
210,20 EUR |
|
|
( 250,14 EUR incl. VAT ) ≈ £175.94 | ≈ $231.01 plus delivery charges: 55,00 € |
|
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |
| Lieske Part No.: | 2033646 |
|---|---|
| Mfg Part No: | 53BM812MV4CXD2 |
| UPC/EAN: | 4069025186072 |
| Weight: | 4 kg |
| Type: | 53BM812MV4CXD2 |
Product information for SITECO 53BM812MV4CXD2:
Applications
This luminaire insert is intended for indoor use, particularly in production and processing areas of the food industry, as it meets the requirements of the International Featured Standards (IFS) for safety and quality. The permissible ambient temperature ranges from -35 °C to +40 °C. When mounted on the ceiling, a reduction of the maximum ambient temperature by 5 °C is required. The protection rating IP20 for the entire device and IP20 for the LED compartment provide sufficient protection against contact and dust, with the IP20 rating protecting the LED area from dust and splashing water. When using the optional accessory 5TP9018, the protection rating is increased to IP20, offering enhanced protection against splashing water.
Functions and Equipment in Detail
The light source is based on LED technology and produces a nominal luminous flux of 12,350 lumens with a light colour of 840 (corresponding to a colour temperature of approximately 4000 K). The colour rendering is specified with an SDCM value of 3 (initial), indicating high colour consistency and minimal deviation in colour reproduction. The primary optical cover consists of PMMA (polymethyl methacrylate), a transparent plastic suitable for its light transmittance and mechanical strength. The light emission is direct and radiant, and the primary light characteristic is symmetrical, enabling uniform light distribution in the space.
Technology Explained Simply
The device is operated via a control gear of type ON/OFF Multilumen, equipped with a 3-pole plug and enabling phase selection. The mains supply voltage is 220 to 240 volts AC at a frequency of 50/60 Hz. The nominal power of the device is 65 watts. The through-wiring is accessible at the system dimension, enabling flexible installation and cabling in existing systems. The protection class SK I (protective earthing) requires earthing of the device to ensure safe operation. The impact resistance is IK03, providing protection against minor mechanical stress.
Compatibility and Accessories
The luminaire insert is designed for use in systems with a system dimension of 299 mm. The optional accessory 5TP9018 enables an increase in protection rating to IP20, suitable for areas with increased humidity or splashing water. The light source and control gear comply with the requirements of the Ecodesign Regulation (EU) 2019/2020 and are replaceable according to this regulation, enabling easy maintenance and repair.
Mounting and Installation
Installation is carried out in existing systems with a system dimension of 299 mm. The through-wiring is accessible at the system dimension, enabling flexible cabling. Earthing is required due to protection class SK I. When mounted on the ceiling, a reduction of the maximum ambient temperature by 5 °C must be considered.
Operational Advantages
The luminaire insert offers high luminous output with 12,350 lumens at a low energy consumption of 65 watts. The colour rendering with SDCM 3 ensures consistent colour reproduction. Compatibility with the system dimension of 299 mm and the possibility of through-wiring facilitate integration into existing lighting systems. Compliance with IFS standards makes the device suitable for use in the food industry. The replaceability of the light source and control gear according to the Ecodesign Regulation (EU) 2019/2020 reduces maintenance costs and increases the system's lifespan.
The certification marks CE, ENEC, VDE, and UKCA confirm compliance with applicable European and British safety and quality standards.
| General | |
| System dimension | 299 mm |
| Colour of light | 840 |
| SDCM (initial) | 3 |
| Ballast | ON/OFF Multilumen |
| Mains supply | 220..240 V |
| Frequency | 50/60 Hz |
| Rated power | 65 W |
| Degree of protection (overall) | IP20 |
| Degree of protection (LED chamber) | IP50 |
| Protection class (overall) | SK I |
| Impact strength | IK03 |
| Permissible ambient temperature | -35..+40 °C |
| Test mark | CE, ENEC, VDE, UKCA |
| Through wiring | tapable in system dimension |
| Primary optical cover | cover made of PMMA |
| Light outlet | directly radiating |
| Primary light characteristic | Symmetric |
| Compatibility | system dimension 299 mm |
| Accessories | 5TP9018 (optional) |
| Eco-design regulation | EU 2019/2020 |
| Interchangeability | light source and operating device interchangeable |
| Application | indoor spaces, food industry |
| Material | steel sheet, band lacquered, white |
Questions & answers
What is the delivery time of SITECO 53BM812MV4CXD2 Modario 31 Gen.2 lighting insert, LED, 12.350 lm, 840?
The article SITECO 53BM812MV4CXD2 Modario 31 Gen.2 lighting insert, LED, 12.350 lm, 840 is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of SITECO 53BM812MV4CXD2 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you SITECO 53BM812MV4CXD2 Modario 31 Gen.2 lighting insert, LED, 12.350 lm, 840 always at the best possible price. We can give you a discount of 2% on SITECO 53BM812MV4CXD2 Modario 31 Gen.2 lighting insert, LED, 12.350 lm, 840 if you choose payment in advance on ordering.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

