Shelly · Flush-mounted · Wave i4 · Scene activator · 12 actions · Z-Wave

Z-Wave™ controller with 4 digital inputs for enhanced action control Manually activate or deactivate any created scene, execute synchronized actions or run complex trigger scenarios.Wave i4 is an input reader (it does not contain relays). Control other Z-Wave devices manually (e.g. with a multi-button switch). Multi-click - activation of up to 12 actions Extremely low power consumption: a gateway (smart hub) is not included. A gateway (smart hub) is required to configure the device.WHY WAVE i4? Replace one of the switches in your room and control all other installed Z-Wave devices!
With Wave i4 you can manually activate or deactivate any created scene, execute synchronized actions or run complex trigger scenarios. You can use it to control other Z-Wave devices in your network with the touch of a button. The retrofit design makes it small enough to fit behind any wall switch. Wave i4 can display the status and control the action of four inputs, offering maximum convenience by allowing all family members to manually control your smart home.INTRODUCING Z-WAVE Shelly Qubino works on Z-Wave By using Z-Wave, smart home products can communicate seamlessly with each other thanks to a central smart hub, regardless of their brand or platform! Shelly Qubino devices work with the latest Z-Wave chip generation (S800), one of the most popular standardized technologies for smart homes worldwide. Works with any Z-Wave gateway Wave i4 is retrofittable and designed to fit behind switches/buttons. After installation, include the device in your Z-Wave network (Z-Wave gateway is required) and control it via your smartphone or tablet. Shelly Qubino devices work with over 4000 Z-Wave certified devices and gateways. Functionalities Z-Wave powered Add Wave i4 to your Z-Wave network and control it remotely. It is compatible with all certified Z-Wave gateways.Multi-click support Up to 12 possible actions. Control the lights, close the blinds and turn off sockets. Manually control any Z-Wave device in your network and execute the desired scenes.Wide range of voltage support Wave i4 can be powered by 110–240V AC.Associations Set up direct communication between devices in your local Z-Wave network and set actions without the need for a hub! Configure up to 8 associations on the switch buttons and trigger them manually. Smart Scenes Set up custom scenes by combining Wave i4 with other Z-Wave devices (gateway required).Endless Uses Multiple Action Support With a simple button press, you can activate up to 12 scenes or actions from other Z-Wave devices on your network. Wave i4 supports up to 3 different automation actions per button, making quick manual control of a group of devices extremely convenient.
Install Wave i4 where it is most convenient for you and set up buttons to simultaneously control lights, blinds and other devices in specific rooms or throughout the building. Scene activation : 1 click Turn off multimedia devices2 clicks Close blinds1 long click (hold). Turn on/off the lights in the hallwayTrigger up to 8 actions without a gateway ! Wave i4 allows you to establish direct communication between your Z-Wave devices and set different associations without the need for a hub!* By supporting 2 associations per button, Wave i4 allows you to trigger and execute up to 8 actions, seamlessly controlling multiple Z-Wave devices. Wave devices with a simple press of a button.
Examples:
1 click (for basic commands).
Turn lights on/off
1 long click (hold) (for multi-stage commands).
Dim lights or open/close blinds
Gateway/Hub is required for some configuration of the device.Ultimate Convenience One of the most frustrating things is when you realize you forgot to turn off the living room lights before going to bed. Especially when your phone is nowhere nearby. But there's no need to worry! Wave i4 allows you to manually control other Z-Wave devices with a switch. Now full control of your home is just a hand away!Control Complex Scenes Manually activate or deactivate complex scenes. Wave i4 allows you to perform synchronized actions of multiple Z-Wave devices. You can install Wave i4 near the front door of your house and turn all the lights in your house on and off with the touch of a button, saving you time when you're in a hurry. Perfect Match Wave i4 is a perfect match for Shelly Wall Switch for Smart Relays - a 4-button switch. Each button can activate up to 4 different actions. This means that up to 16 scenes can be triggered and executed with just one 4-button switch! Thanks to its compact dimensions and simple wiring, Shelly Wall Switch fits into any existing switch panel or even the smallest of spaces. No extension of the wall space or changes to the wiring required! Specifications Power supply AC110-240V, 50/60Hz Power supply DC NO Energy consumption Surge protection NO Power metering NO Working without neutral NO Number of inputs 4 Distance up to 40m indoors (depending on local conditions) Z-Wave repeater: Yes CPU Z-Wave S800 Z-Wave frequency band 868.4MHz Maximum transmitted radio frequency power in frequency bands Size (H x W x D) 37 x 42 x 16 0.5mm / 1.46 x 1.65 x 0.63 0.02in Weight 17g / 0.6oz Mounting Wall bracket Screw terminals Max. torque 0.4Nm / 3.5lbs Conductor cross section 0.5 to 1.5mm / 20 to 16AWG Stripped conductor length 5 to 6mm / 0.20 to 0.24in Shell material Plastic Color Orange Ambient temperature -20 °C to 40 °C / -5 °F to 105 °F Humidity 30 % to 70 % relative humidity