Ses-Sterling 07390210007 Pliofine B-EX 160 Box (11m) red shrink tube 2:1 content_copy

The shrink tube Pliofine B-EX 160 Box (11m) red from Ses-Sterling is a professional protective material for cables and wires in the field of electrical and IT installation. It serves for mechanical and electrical insulation as well as protection against environmental influences such as dust, moisture or mechanical stress. The packaging contains 11 metres of the red-coloured shrink tube, delivered in a box. The red colour serves for visual identification and facilitates recognition in the installation environment, especially in systems with colour-coded wiring.

Applications

The shrink tube is suitable for use in industrial, commercial and technical installations where reliable insulation and protective layering for cables and wires is required. It is frequently used in electrical installations, during the mounting of control wiring, in automation technology or for wiring of machines and devices. The red colour enables quick visual differentiation from other wires, which supports error prevention and maintenance in complex wiring systems.

Functions and Equipment in Detail

The shrink tube has a shrink ratio of 2:1, meaning that it reduces to half its original outer diameter when heated. This ensures a tight, form-stable fit around the cables or wires to be protected. The shrink ratio is crucial for the quality of insulation and the mechanical stability of the connection. The packaging contains 11 metres of the tube, which is sufficient for larger installations. The red colouring is permanent and resistant to UV radiation and chemical influences, as long as these occur within the typical application environment.

Technology Explained Simply

The shrink tube is made of a thermoplastic material that shrinks when heated (e.g. with a hot air blower) and tightly wraps around the underlying cables. This process creates a dense, form-stable protective sleeve that resists mechanical stress, moisture and dust. The 2:1 shrink ratio allows flexible adaptation to different cable diameters, while the final fit remains stable after shrinking. The red colour is not only visually identifiable but also relevant for cable identification according to standards such as DIN 47100 or VDE 0815, where colours are used to distinguish wires.

Compatibility and Accessories

The shrink tube is designed for use with cables and wires used in electrical and IT installations. It is compatible with standard cables and wires having a maximum outer diameter of up to 160 mm, with the 2:1 shrink ratio enabling adaptation to smaller diameters. Processing is done by evenly heating the tube, causing it to shrink and envelop the cables.

Installation and Mounting

Installation is carried out by sliding the shrink tube over the cables or wires to be protected. It is then evenly heated with a hot air blower until it shrinks and forms a tight fit. The temperature and duration of heating must be chosen so that the tube shrinks completely without burning or deforming. The red colour remains intact and ensures clear visual identification. Processing requires no additional adhesives or chemicals, as the shrinking process itself creates a secure bond.

Advantages in Operation

The shrink tube provides a reliable, durable insulation and protective layer that resists mechanical stress, moisture and dust. The red colour facilitates identification and marking of wires, accelerating maintenance and fault diagnosis during operation. The 2:1 shrink ratio allows flexible adaptation to various cable diameters, enabling use in different installation scenarios. The packaging with 11 metres provides sufficient quantity for larger projects, allowing more efficient workflow.

General
Colour	Red

---