Ses-Sterling 06030270010 Pliofine SAM 12.7 Box (8m) black shrink tube 2:1 content_copy

The shrink tube Pliofine SAM 12.7 Box (8m) from Ses-Sterling is a professional protective material for cables and wiring in the field of electrical and IT installation. It serves mechanical and electrical insulation as well as protection against environmental influences such as dust, moisture, or mechanical stress. The packaging contains 8 meters of the black shrink tube, delivered in a box. The product name Pliofine SAM 12.7 refers to the specific product line and the nominal size of 12.7 mm, which describes the inner diameter of the tube before shrinking.

Shrink tube is a thermoplastic material that shrinks to approximately half its original diameter when heated to around 100 to 120 °C. This 2:1 shrink ratio enables a tight fit around cables or wiring, creating a dense, form-stable covering. The black color is standard for use in technical installations and industrial environments, as it is UV-resistant and resistant to light aging.

Applications include cable protection covering in electrical installation, network cable mounting, wiring of control lines in automation technology, and in safety technology. The shrink tube is particularly suitable for applications requiring durable, weather-resistant, and mechanically robust insulation. It can be used at cable ends, connection points, or along wiring sections to ensure clean and professional processing.

Functions and equipment in detail include thermal shrinkability, which allows precise adaptation to cable geometry. The material composition ensures high mechanical strength and resistance to mechanical stress. The black color is not only aesthetically neutral but also functional, as it resists UV radiation and is therefore suitable for outdoor use. The packaging unit of 8 meters provides sufficient quantity for multiple installation steps, while the box ensures stable storage and transport.

Technology explained simply means that the shrink tube is activated by heat — for example, using a hot air blower. The material then contracts and tightly conforms to the cable underneath. The 2:1 shrink ratio means that a tube with an inner diameter of 12.7 mm reaches a diameter of approximately 6.35 mm after shrinking. This ensures a tight fit, enabling secure and dense coverage. The material composition is chosen to provide high heat resistance and chemical resistance, which is important for use in industrial environments.

Compatibility and accessories include use with various cable types, particularly with wiring having a diameter of up to 6.35 mm. The shrink tube is suitable for use in combination with cable ties, insulating tape, or other protective materials to achieve additional security or improved mechanical stability. The use of hot air blowers or other heat sources is required to initiate the shrinking process.

Installation and mounting are performed by sliding the shrink tube over the cable section to be protected and then heating it with a hot air blower. The temperature should be between 100 and 120 °C to ensure even shrinking. The shrinking time depends on length and ambient temperature and takes a few seconds to one minute. After cooling, the shrink tube is firmly and tightly fitted around the cable.

Operational advantages lie in easy handling, high mechanical strength, and durable protective function. The shrink tube provides a clean, professional appearance and protects the underlying wiring from external influences. The black color is especially suitable for use in technical installations and industrial environments, as it integrates well visually into the surroundings and is UV-resistant. The packaging unit of 8 meters provides sufficient quantity for multiple installation steps, thereby increasing cost-efficiency.

General
Colour	Black

---