Ses-Sterling 037401700047 Pliosnap+ PS-15 7 yellow marker 5.8–8.5 mm content_copy

The product is a cable marker from the brand Ses-Sterling, type Pliosnap+ PS-15, in the colour yellow with black print of the digit 7. It is used for clear identification of cables in the field of electrical and IT installation. The markers are designed for use on cables with an outer diameter of 5.8 to 8.5 mm, corresponding to a cable cross-section of 10.0 to 16.0 mm². The material of the markers is POM (polyoxymethylene), a technical plastic known for its high strength, heat resistance, and chemical resistance. Therefore, the markers are suitable for use in industrial and technical installations where durable and robust labelling is required.

Cable markers are essential in electrical installation to uniquely identify cables and wiring. This facilitates maintenance, fault diagnosis, and safe operation of systems. The Pliosnap+ PS-15 is specifically designed for medium-sized cables commonly found in electrical and automation technology. The colour yellow and the black print 7 enable clear visual distinction, especially in complex cabling systems. The markers are supplied loose and can be easily slipped over the cable, securing themselves via a clamping connection.

Functions and equipment in detail

The markers are designed for a cable outer diameter of 5.8 to 8.5 mm, ensuring a precise fit for cables with a cross-section of 10.0 to 16.0 mm². The use of POM as the material ensures high mechanical strength and good resistance to moisture, oil, and other chemical influences. Therefore, the markers are also suitable for environments with higher requirements for material durability. The marking with the digit 7 is printed in black, providing high contrast against the yellow base colour and supporting readability even under low light conditions.

Technology explained clearly

The marker consists of a flexible yet stable plastic ring that slides over the cable and is fixed by a clamping connection. The material POM is characterised by high heat resistance and low friction, which facilitates installation and increases durability. The colour yellow is often assigned to specific wiring functions or systems in electrical engineering, although the exact assignment varies according to application standards. The marking 7 serves as a unique identification number, used in conjunction with a labelling system to uniquely identify cables in a network or installation.

Compatibility and accessories

The markers are specifically designed for cables with an outer diameter of 5.8 to 8.5 mm. They are therefore compatible with cables in the cross-section range of 10.0 to 16.0 mm², such as those used in electrical installations for power lines or in automation technology. The markers are part of the Pliosnap+ system from Ses-Sterling and can be combined with other markers from this series to ensure a consistent labelling system.

Installation and mounting

Installation is carried out by simply sliding the marker over the cable. The clamping connection ensures that the marker secures itself to the cable and does not slip off. No tools or additional aids are required for use. The markers are supplied loose, enabling flexible use. The packaging unit contains 50 markers, delivered in a bag. The packaging is designed to prevent damage to the markers during transport.

Advantages in operation

The use of POM as the material ensures long service life and high resistance to mechanical stress and environmental influences. The clear marking with the digit 7 in black on yellow enables quick and unambiguous identification of cables. The markers are easy to install and require no special tools. The fit for cables with an outer diameter of 5.8 to 8.5 mm ensures secure attachment without being too loose or too tight. The labelling supports maintenance and fault diagnosis in complex installations by enabling clear assignment of wiring.

General
Colour	Yellow

---