Ses-Sterling 03740150004C PLIO SNAP+ PS-09 C YE content_copy

The PLIO SNAP+ PS-09 C" marker from Ses-Sterling is a cable marking system, specifically developed for clear and permanent labelling of cables in electrical and IT applications. The marking is done using pre-printed markers, which are mounted on cables with an outer diameter of 3.2 to 4.5 mm and a cable cross-section of 2.5 mm². The markers are yellow in colour and feature the black print "C, enabling clear visual identification. The product is delivered in a packaging unit containing 12 loaded carrier rods, with a total of 300 markers per pack. The carrier rods themselves are blue and made of POM (polyoxymethylene), a robust, wear-resistant plastic known for high mechanical strength and chemical resistance. The markers are designed to be easily and quickly snapped onto the cable without requiring additional tools or adhesives.

Cable marking is a central component of structured cabling, especially in complex installations where quick and secure identification of lines is required. The PLIO SNAP+ PS-09 C" is particularly suitable for applications in electrical installation, building automation, and IT infrastructures, where clear assignment of cables to specific functions or lines is necessary. The yellow colour and black letter "C allow for quick visual differentiation, reducing errors during installation or maintenance. The markers are intended for indoor use, and the material choice (POM) ensures high resistance to mechanical stress and common environmental conditions.

Functions and equipment in detail include the pre-printed marking of the markers with the code "C", enabling direct assignment to specific cable groups or functions. The markers can be mounted on cables with an outer diameter of 3.2 to 4.5 mm, making them suitable for a wide range of standard cable types in electrical and data cabling. The use of POM as material ensures high durability and resistance to wear, which is particularly advantageous in industrial or frequently used environments. The carrier rods, which transport the markers, are blue and can be purchased unloaded, although the packaging delivered here is already loaded with 300 markers.

Technology explained simply shows that the markers feature a snap system enabling easy installation without tools. The material POM is a high-quality thermoplastic known for its high strength, low friction, and resistance to chemicals and moisture. The yellow colour with black print ensures high readability, even under low lighting conditions. The markers are not self-adhesive but are snapped onto the cable, making them easy to install and, if necessary, to remove again. The packaging unit contains 12 carrier rods, each carrying multiple markers, enabling efficient storage and handling.

Compatibility and accessories refers to the use of the markers with cables in the diameter range of 3.2 to 4.5 mm and a cross-section of 2.5 mm². The markers are not designed for other diameters or cross-sections, so precise matching to the cables used is required. The carrier rods are blue and made of POM, with the packaging delivered here already loaded.

Mounting and installation is done by simply snapping the markers onto the cable. No additional tools, adhesives, or special mounting methods are required. The markers fit securely but not permanently, allowing them to be removed if necessary. Installation is quick and can also be performed in confined spaces, as no additional aids are needed. The markers are used directly on the cable, with the marking applied at the point where clear identification is required, e.g. at the connection, termination point, or cable branch.

A benefit in operation is the high readability of the markers due to the combination of yellow background and black print, enabling quick identification even under difficult lighting conditions. The material strength of POM ensures a long service life of the markers, even under mechanical stress. The simple tool-free installation reduces installation time and minimises error sources. The packaging unit with 300 markers provides sufficient quantity for larger projects, reducing the need for repeat orders. The markers are designed for indoor use, with the material selection ensuring high resistance to environmental conditions.

General
Colour	Yellow

---