Ses-Sterling 03740140004 PLIO SNAP+ PS-06 YE * content_copy

The Ses-Sterling marker PLIO SNAP+ PS-06 is a cable labelling system specifically designed for marking cables with outer diameters between 2.6 and 3.5 mm and cable cross-sections of 1 to 1.5 mm². The markers are available in yellow with black print and are made of polyoxymethylene (POM), a robust plastic known for its high strength and heat resistance. The carrier rods, which are red in colour, are used for storing and transporting the markers and can also be purchased empty. A packaging unit contains 10 loaded carrier rods, holding a total of 300 markers. The packaging weighs 38 g and is supplied in a bag.

Cable labelling is a central component in electrical and IT installations, enabling cables to be uniquely identified and preventing errors during maintenance or renovation. The PLIO SNAP+ PS-06 is particularly suitable for applications requiring clear, durable, and easily readable labelling. The yellow colour of the markers ensures good visibility, while the black print provides high contrast, remaining legible even under low lighting conditions.

Functions and equipment in detail

The markers are designed to be easily and securely fitted onto cables with the specified diameter. The POM material ensures high mechanical stability and resistance to wear, extending the lifespan of the markers. The use of carrier rods enables orderly storage and simplifies selection of the required markers. The red-coloured carrier rods visually distinguish themselves from the yellow markers, enabling quick identification in storage or workshop areas.

Technology explained simply

The PLIO SNAP+ PS-06 marker uses a simple yet effective principle: the markers are designed as rings that slide over the cable cross-section and are secured by a spring-loaded or snap-lock mechanism. The POM material provides good elasticity, allowing the markers to adapt without damaging the cable. The yellow colour with black text is standard for labelling systems in electrical and IT technology, as it ensures high readability and recognisability.

Compatibility and accessories

The markers are designed for cables with an outer diameter of 2.6 to 3.5 mm and a cross-section of 1 to 1.5 mm². They are therefore suitable for a wide range of conductors used in electrical installations, building automation, or IT infrastructure. The red-coloured carrier rods can be purchased empty, enabling flexible use, for example when markers with custom labelling are required. The packaging unit contains 10 loaded carrier rods with a total of 300 markers, which is sufficient for larger projects or bulk orders.

Installation and mounting

Installation is carried out by simply sliding the marker onto the cable. The spring-loaded or snap-lock mechanism ensures the marker remains securely attached to the cable. No additional tools or adhesive techniques are required. The markers can also be easily removed again if a change in labelling is needed. The carrier rods facilitate storage and transport by keeping the markers organised.

The markers are designed for permanent use indoors. The materials are resistant to mechanical stress and minor temperature fluctuations typical of installation environments. The use of POM ensures high resistance to wear and chemical influences that may occur in electrical and IT technology.

Advantages in operation

The clear colour scheme and high contrast of the black text on a yellow background ensure quick and secure identification of cables. The robust material choice of POM guarantees long service life and resistance to mechanical stress. The use of carrier rods enables orderly storage and simplifies selection of the required markers. The simple, tool-free installation reduces installation time and minimises error sources.

General
Colour	Yellow

---