Ses-Sterling 03740130004 Pliosnap+ PS-03 + yellow marker 1.9–2.6 mm + content_copy

The Ses-Sterling Pliosnap+ PS-03 + yellow is a cable marker from the product group of identification systems, specifically designed for marking cables with an outer diameter of 1.9 to 2.6 mm and a cable cross-section of 0.75 mm². The markers are made of polyoxymethylene (POM), a thermoplastic material known for its high strength, heat resistance, and chemical resistance. The colour of the markers is yellow, with black printing showing the symbol "+". The carrier rods, on which the markers are mounted, are green and can be purchased empty. A packaging unit contains 10 pre-loaded carrier rods with a total of 300 markers. The packaging weighs 28 g.

Cable identification is a central component of installation technology, enabling cables to be clearly identified during operation and avoiding sources of error. The Pliosnap+ PS-03 + yellow is particularly suitable for cables with a cross-section of 0.75 mm², which is typical for wiring in electrical installations, automation technology, or IT applications. The specified fit for outer diameters of 1.9 to 2.6 mm ensures secure and durable attachment without damaging the cable jacket.

Functions and equipment in detail

The markers are designed as self-adhesive labels, secured to the carrier rods via a special locking mechanism. This enables easy handling and quick installation. The POM material ensures high mechanical load capacity and durability, even under industrial conditions. The yellow colour with black printing provides good readability and is commonly used in electrical engineering as an identification colour for specific functions or systems. The green carrier rods serve as practical storage and transport units and can be reused if purchased empty.

Technology explained simply

The material POM (polyoxymethylene) is a high-quality plastic valued for its excellent mechanical properties, such as high strength, stiffness, and abrasion resistance, as well as its heat and chemical resistance. It is particularly suitable for components under load, such as cable markers that remain attached to cables for extended periods. The self-adhesive mounting of the markers on the carrier rods allows for quick and secure installation without requiring additional tools or adhesives.

Compatibility and accessories

The markers are specifically designed for cables with an outer diameter of 1.9 to 2.6 mm, corresponding to a cable cross-section of 0.75 mm². They are therefore compatible with standard cables used in electrical and IT installations. The green carrier rods can be purchased empty, enabling flexible use. The packaging unit contains 10 pre-loaded carrier rods with a total of 300 markers, ensuring efficient storage and handling.

Installation and mounting

Installation is carried out by simply pulling the markers off the carrier rods and then sticking them onto the cable. The locking mechanism ensures that the markers do not accidentally fall off. The self-adhesive attachment is permanent and withstands mechanical stress and environmental influences. The markers are designed for simple and fast cable identification in installation technology.

Advantages in operation

Using Pliosnap+ PS-03 + yellow markers provides clear and durable cable identification, simplifying maintenance, servicing, and fault diagnosis during operation. The high-quality POM material ensures long service life and reliability. The clear colour scheme and high-contrast printing guarantee good readability, even under low lighting conditions. The packaging unit with 300 markers enables cost-effective use, especially in larger installations.

The markers are specifically designed for identifying cables with a cross-section of 0.75 mm² and an outer diameter of 1.9 to 2.6 mm. The POM material ensures high mechanical load capacity and durability. The green carrier rods serve as storage and transport units and can be purchased empty. The packaging unit contains 10 pre-loaded carrier rods with a total of 300 markers. The yellow colour with black printing provides good readability and is commonly used as an identification colour in electrical engineering.

The markers are designed for cable identification in electrical and IT installations. The self-adhesive attachment enables easy and secure installation. The high-quality POM material ensures long service life and reliability. The clear colour scheme and high-contrast printing guarantee good readability, even under low lighting conditions. The packaging unit with 300 markers enables cost-effective use, especially in larger installations.

The markers are specifically designed for cables with an outer diameter of 1.9 to 2.6 mm and a cable cross-section of 0.75 mm². The POM material ensures high mechanical load capacity and durability. The yellow colour with black printing provides good readability. The green carrier rods serve as storage and transport units and can be purchased empty. The packaging unit contains 10 pre-loaded carrier rods with a total of 300 markers. The markers are designed for cable identification in electrical and IT installations. The self-adhesive attachment enables easy and secure installation. The high-quality POM material ensures long service life and reliability. The clear colour scheme and high-contrast printing guarantee good readability, even under low lighting conditions. The packaging unit with 300 markers enables cost-effective use, especially in larger installations.

General
Colour	Yellow

---