Ses-Sterling 037400600015 PLIO SNAP+ PS-12 5 WH content_copy

The Ses-Sterling marker PLIO SNAP+ PS-30,5 cm ( 12 inch )12,7 cm ( 5 inch ) is a cable identification system for use in electrical and IT trades. It is intended for the clear identification of cables and lines to avoid errors during installation, maintenance, or dismantling. The markers are white with a black print of the digit 5 and are designed for cables with an outer diameter of 4.5 to 6.0 mm and a cable cross-section of 4.0 to 6.0 mm². The material of the markers is POM (polyoxymethylene), a technical plastic known for its high strength, heat resistance, and abrasion resistance. The carrier rods, on which the markers are mounted, are yellow and can also be purchased without markers, enabling flexible use.

Cable identification is an essential part of proper cabling in technical installations. The PLIO SNAP+ PS-30,5 cm ( 12 inch )12,7 cm ( 5 inch ) enables quick and secure identification of cables, especially in complex installations with many lines. The digit 5 serves as a visual identifier that is easily distinguishable from other markers. The use of POM as material ensures long service life and resistance to mechanical stress and chemical influences that may occur during operation.

Functions and equipment in detail include pre-mounted markers on yellow carrier rods, enabling easy handling and quick attachment to cables. The markers are designed for a cable outer diameter of 4.5 to 6.0 mm, making them suitable for medium-sized cables in electrical installations and IT infrastructure. The packaging unit contains 12 pre-mounted carrier rods with a total of 300 markers, providing sufficient quantity for larger projects. The white color with black print ensures good readability and contrast, even under low lighting conditions.

Technology explained simply shows that the markers are made of POM, a thermoplastic polymer used for its mechanical properties such as high stiffness, low friction, and good wear resistance. These properties make the material particularly suitable for use in technical installations where markers may be exposed to mechanical stress. The yellow carrier rods are standardly connected to the markers, enabling quick and secure mounting on cables.

Compatibility and accessories refers to the use of markers with cables within the specified diameter and cross-section range. The markers are not suitable for cables outside the range of 4.5 to 6.0 mm outer diameter. The yellow carrier rods can be purchased without markers, allowing for individual loading.

Mounting and installation is done by attaching the markers to the cables, with the pre-mounted configuration on carrier rods enabling quick and secure fastening. The markers are designed to easily wrap around and fix to the cable without requiring additional tools or adhesives. The application is directly on the cable, ensuring correct positioning and visibility of the identification.

Advantages in operation lie in the clear and durable identification of cables, which reduces errors during installation and maintenance. The use of POM ensures high resistance to mechanical and chemical influences, extending the service life of the markers. The pre-mounted configuration on carrier rods speeds up the workflow and reduces the risk of errors during fastening. The clear digit 5 in black on white ensures high readability and quick identification of cables.

The packaging unit contains 12 pre-mounted carrier rods with a total of 300 markers.

The markers are specifically designed for use in technical installations where clear and durable cable identification is required. The use of POM as material ensures high quality and longevity of the markers.

The color of the markers is white, the print is black. The carrier rods are yellow. The markers are designed for cables with an outer diameter of 4.5 to 6.0 mm and a cross-section of 4.0 to 6.0 mm². The packaging unit contains 300 markers on 12 carrier rods. The weight of the packaging is 75 g.

The markers are not suitable for cables outside the specified diameter and cross-section range. Mounting is done directly on the cable, with the pre-mounted configuration on carrier rods enabling quick and secure fastening. The application requires no additional tools or adhesives.

The advantages in operation lie in the clear and durable identification of cables, which reduces errors during installation and maintenance. The use of POM ensures high resistance to mechanical and chemical influences, extending the service life of the markers. The pre-mounted configuration on carrier rods speeds up the workflow and reduces the risk of errors during fastening. The clear digit 5 in black on white ensures high readability and quick identification of cables.

The packaging unit contains 12 pre-mounted carrier rods with a total of 300 markers.

The markers are specifically designed for use in technical installations where clear and durable cable identification is required. The use of POM as material ensures high quality and longevity of the markers. The color of the markers is white, the print is black. The carrier rods are yellow. The markers are designed for cables with an outer diameter of 4.5 to 6.0 mm and a cross-section of 4.0 to 6.0 mm². The packaging unit contains 300 markers on 12 carrier rods. The weight of the packaging is 75 g.

The markers are not suitable for cables outside the specified diameter and cross-section range. Mounting is done directly on the cable, with the pre-mounted configuration on carrier rods enabling quick and secure fastening. The application requires no additional tools or adhesives.

The advantages in operation lie in the clear and durable identification of cables, which reduces errors during installation and maintenance. The use of POM ensures high resistance to mechanical and chemical influences, extending the service life of the markers. The pre-mounted configuration on carrier rods speeds up the workflow and reduces the risk of errors during fastening. The clear digit 5 in black on white ensures high readability and quick identification of cables.

The packaging unit contains 12 pre-mounted carrier rods with a total of 300 markers.