Ses-Sterling PLIO SNAP+ PS-06 rectangular connector white 03740040001CRE content_copy

The PLIO SNAP+ PS-06 Rect.curr. marker from Ses-Sterling is a cable identification system for use in electrical and IT installations. It enables the clear identification of cables and lines using pre-made, self-adhesive markers supplied on carrier rods. The markers are white with black print and made of polyoxymethylene (POM), a robust plastic known for its high strength and chemical resistance. The carrier rods, coloured red, allow for orderly storage and easy removal of the markers. The packaging unit contains 10 loaded carrier rods with a total of 300 markers, designed for cable outer diameters of 2.6 to 3.5 mm and cable cross-sections of 1 to 1.5 mm². The markers are therefore suitable for medium-sized cables in the field of electrical installations.

Cable identification is a central component of documentation and maintenance in technical systems. The PLIO SNAP+ markers enable clear, durable labelling that remains legible even under industrial conditions. The use of POM as material ensures high mechanical stability and resistance to wear, which is particularly beneficial in environments with frequent handling or mechanical stress. The white colour of the markers with black print provides high contrast, improving readability even in low light conditions. The markers are designed for use on cables with an outer diameter between 2.6 and 3.5 mm, making them suitable for a wide range of standard cables in electrical installations.

The markers are designed as Rect.curr. (rectangular, for current-carrying conductors) and are particularly suitable for marking lines in enclosures, distribution boxes or other electrical systems. The packaging unit contains 300 markers arranged on 10 carrier rods. The carrier rods are red and can be purchased empty, enabling flexible use. The markers are self-adhesive and can be easily applied to the cable, with the adhesive surface ensuring secure adhesion. The packaging weighs 38 g and is supplied in a bag.

The compatibility of the markers is limited to cables with an outer diameter of 2.6 to 3.5 mm and a cross-section of 1 to 1.5 mm². This covers a typical range for electrical conductors in building and industrial technology. The markers are not intended for cables with other diameters or cross-sections. The use of POM as material ensures long service life and resistance to environmental influences such as moisture or temperature fluctuations. The markers are not intended for outdoor use or extreme environments, as no specific protection ratings such as IP rating are specified.

Installation is carried out by simply sticking the markers onto the cable. The self-adhesive backing allows for quick and secure attachment without additional tools or adhesives. The markers are designed to be easily removed from the carrier rods and applied directly to the cable. The carrier rods are bundled in a packaging unit, enabling orderly storage and retrieval. The markers are not intended for use with special tools or connection devices.

The operational advantages lie in easy handling, clear labelling and high material durability. The markers enable quick identification of cables, simplifying maintenance and fault diagnosis in electrical systems. The use of POM ensures long service life and resistance to mechanical stress. The white colour with black print guarantees good readability. The markers are intended for indoor use and not designed for outdoor environments or extreme conditions.