Ses-Sterling 037000730040 Pliotex PT-V+ 45 0 yellow rings pre-cut 2.2–5.0 mm content_copy

Identification rings of the PLIOTEX-VPLUS series, type PT-V+ 45 0, in yellow colour, are manufactured by Ses-Sterling and serve for the unambiguous identification of cables in electrical and electronic installations. The rings are marked with a black print of the identification "0 cm ( 0 inch ) and are made of soft PVC, a flexible and shape-stable plastic that adapts well to cable surfaces. They are designed for cable outer diameters from 2.2 to 5.0 mm and are therefore suitable for cables with a cross-section of 1 to 6 mm². The yellow colour serves as a visual identification and supports quick identification during maintenance and installation work.

Applications
These identification rings are intended for use in electrical installations, industrial controls, building automation technology, and other areas where clear and durable cable identification is required. They enable structured documentation of wiring and facilitate fault diagnosis and maintenance. The rings are designed for indoor use, with the material composition of soft PVC ensuring good resistance to mechanical stress and minor environmental influences.

Functions and equipment in detail
The rings are pre-cut and packaged individually, enabling quick and precise installation. The black print "0 cm ( 0 inch ) is clearly legible and remains visible even after prolonged use. The yellow colour supports visual differentiation from other cables, especially in complex systems with multiple lines. The rings are designed for cables with an outer diameter between 2.2 and 5.0 mm, ensuring broad applicability for standard cables in the field of electrical installation.

Technology explained simply
The use of soft PVC as material ensures high flexibility and shape stability of the rings. The material can elastically adapt to the cable surface without tearing or deforming. The pre-cut shape allows for easy installation, where the ring is simply slid over the cable and positioned at the desired location. The identification "0 cm ( 0 inch ) is directly printed on the ring surface, ensuring durable and abrasion-resistant labelling. The yellow colour is a visual feature that, in combination with the black print, ensures clear readability even under low light conditions.

Compatibility and accessories
The rings are specifically designed for cables with an outer diameter of 2.2 to 5.0 mm and a cross-section of 1 to 6 mm². They are therefore compatible with a wide range of standard cables used in electrical installation and building automation technology. There are no specific accessories associated with this item; the rings are supplied as individual pieces and can be used independently of other components.

Installation and mounting
Installation is carried out by simply sliding the ring over the cable. Due to the pre-cut shape and the flexibility of the soft PVC material, no additional tools are required. The rings can be easily positioned and secure themselves to the cable surface through their elastic shape. The installation is quick and does not require special skills, making it suitable even for beginners in electrical installation.

Advantages in operation
The unambiguous identification through the combination of yellow colour and black print "0 cm ( 0 inch ) enables quick and secure cable identification. The use of soft PVC ensures long service life and resistance to mechanical stress. The pre-cut shape and simple installation reduce labour effort and increase efficiency during installation. The rings are available in a pack of 100 pieces, enabling economical use in larger projects.

The item price shown refers to 100 pieces Ses-Sterling 037000730040

General
Colour	Yellow

---