Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English
Schneider Electric Logo

Schneider Electric XPSUVN31AP safety relay standstill monitoring PLe/Kat3/SIL3

Your rating:
Average rating
product review for Schneider Electric XPSUVN31AP safety relay standstill monitoring PLe/Kat3/SIL3
( 5 / 5 ) 1 ratings
494,00 EUR 514,80 EUR
( 587,86 EUR incl. VAT )
≈ £413.48  |  ≈ $542.91
plus delivery charges: 55,00 €
Made to order · Delivery time approx. 8 workdaysinfo_outline
1x Schneider Electric XPSUVN31AP safety relay standstill monitoring PLe/Kat3/SIL3
Datasheet:file_download Download
Lieske Part No.:1061240
Mfg Part No: XPSUVN31AP
UPC/EAN: 3606482034068
Weight:0.272 kg
Type:XPSUVN31AP
Graduated prices net
From piecesPrice per pieces
4475,48 EUR
8456,95 EUR
12438,42 EUR
16419,90 EUR

Product information for Schneider Electric XPSUVN31AP:

The Harmony XPS Universal safety relays are characterized by their range of functions and diagnostic capabilities, which reduce downtime in the event of a fault. This safety relay includes safe standstill detection by measuring the remanent voltage, so that no further sensors need to be installed. To do this, the motor cable is connected to the standstill monitor and the voltage induced by the expiring rotary movement is measured after the motor is switched off. If the measured remanent voltage falls below the limit value set on the front (50-500 mV), the motor is assumed to be at a standstill. In addition, a delay time of 0.5 to 60 seconds can also be set on the front. DC and AC motors in 1- or 3-phase networks up to 690 V can be monitored for motor standstill. This safety switching device has 1 safe relay normally open contact, 1 semiconductor signaling output and 1 diagnostic message as an output. With the help of the qualified diagnostics, states and errors are detected and transmitted to a standard input of a PLC using a telegram via direct wiring. A ready-made function block for common control systems evaluates these messages so that the operator is fully informed on the machine display. The supply voltage is 48-240 VAC/DC and the connections are made via removable screw terminals. Applications up to safety level PL e in category 3 or SIL3 can be realized. If the number of outputs is to be increased, the XPSUEP extension can simply be connected to the side via an integrated connector and cross-wiring can be dispensed with, saving time. It is mounted by snapping it onto a top hat rail or screwing it onto mounting plates. A uniquely numbered locking strap is included to protect the settings under the transparent cover. A wide range of approvals enable international use. Thanks to the Green Premium environmental label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.

Complementary
Power consumption in W2.5 W
Power consumption in VA5.5 VA
Input voltage690 V
Input detection threshold50 mV; 65 mV; 85 mV; 110 mV; 140 mV; 180 mV; 230 mV; 300 mV; 400 mV; 500 mV
Time delay0.5 s; 1 s; 2 s; 3 s; 5 s; 8 s; 12 s; 20 s; 35 s; 60 s
[Ie] rated operational current5 A AC-1 for normally open relay contact; 3 A AC-15 for normally open relay contact; 5 A DC-1 for normally open relay contact; 3 A DC-13 for normally open relay contact
[Ith] conventional free air thermal current6 A for NO relay output circuit
Associated fuse rating6 A gG for relay output conforming to IEC 60947-1
StandardsIEC 60947-5-1; IEC 61508-1 functional safety standard; IEC 61508-2 functional safety standard; IEC 61508-3 functional safety standard; IEC 61508-4 functional safety standard; IEC 61508-5 functional safety standard; IEC 61508-6 functional safety standard; IEC 61508-7 functional safety standard; ISO 13849-1 functional safety standard; IEC 62061 functional safety standard
Minimum output current10 mA for relay output
Minimum output voltage5 V for relay output
[Ui] rated insulation voltage690 V phase to phase (pollution degree 2) conforming to IEC 60947-1; 400 V phase to earth (pollution degree 2) conforming to IEC 60947-1
[Uimp] rated impulse withstand voltage4 kV overvoltage category II conforming to IEC 60947-1
Local signallingLED green with power marking for power ON; LED red with error marking for error; LED yellow with state marking for status; LED yellow with L12 marking for input line comparison; LED yellow with L32 marking for input line comparison
Connections - terminalsRemovable screw terminal block solid or flexible cable: 0.2...2.5 mm²; Removable screw terminal block flexible with ferrule cable: 0.25...2.5 mm² single conductor; Removable screw terminal block solid or flexible cable: 0.2...1.5 mm² twin conductor; Removable screw terminal block flexible with ferrule cable: 2 x 0.25...1 mm² without cable end, with bezel; Removable screw terminal block flexible with ferrule cable: 2 x 0.5...1.5 mm² with cable end, with bezel
Mounting support35 mm symmetrical DIN rail
Depth120 mm
Height100 mm
Width22.5 mm
Net weight0.2 kg
Contractual warranty
Warranty (in months)18
Environment
IP degree of protectionIP20 (terminals) conforming to IEC 60529; IP40 (housing) conforming to IEC 60529; IP54 (mounting area) conforming to IEC 60529
Ambient air temperature for operation-25…55 °C
Ambient air temperature for storage-40…70 °C
Relative humidity5…95 % non-condensing
Logistical informations
Country of originID
Main
Range of productHarmony Safety Automation
Product or component typeSafety module
Safety module nameXPSUVN
Safety module applicationFor zero speed detection
Function of moduleMonitoring 3-phase motor; Monitoring 3-phase motor with star-delta starting; Monitoring 3-phase motor with variable number of poles; Monitoring 3-phase motor with variable number of poles and star-delta starting; Monitoring dc motor; Monitoring servo motor; Monitoring 3-phase motor supplied by variable speed drive; Monitoring 3-phase motor supplied by servo drive; Controlling enegization to open of guard switch type XCSE, XCSLE, XCSLF, XCST
Safety levelCan reach PL e/category 3 for normally open relay contact conforming to ISO 13849-1; Can reach SILCL 3 for normally open relay contact conforming to IEC 62061; Can reach SIL 3 for normally open relay contact conforming to IEC 61508
Safety reliability dataMTTFd > 30 years conforming to ISO 13849-1; Dcavg = 98.9 % conforming to ISO 13849-1; PFHd = 2.44E-9 1/h conforming to ISO 13849-1; HFT = 1 conforming to IEC 62061; PFHd = 2.44E-9 1/h conforming to IEC 62061; SFF > 99% conforming to IEC 62061; HFT = 1 conforming to IEC 61508-1; PFHd = 2.44E-9 1/h conforming to IEC 61508-1; SFF > 99% conforming to IEC 61508-1; Type = B conforming to IEC 61508-1
Product certificationsTÜV; cULus
[Us] rated supply voltage48...240 V AC/DC - 10...10 %
Output typeRelay, 1 NO circuit(s), volt-free
Number of additional circuits2 solid state outputs
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height6.5 cm
Package 1 Width13.5 cm
Package 1 Length15.5 cm
Package 1 Weight272.0 g
Unit Type of Package 2S03
Number of Units in Package 216
Package 2 Height30 cm
Package 2 Width30 cm
Package 2 Length40 cm
Package 2 Weight5.075 kg


Product data sheet
Datasheet for Schneider Electric XPSUVN31AP, EAN: 3606482034068

Questions & answers

What is the delivery time of Schneider Electric XPSUVN31AP safety relay standstill monitoring PLe/Kat3/SIL3?

The article Schneider Electric XPSUVN31AP safety relay standstill monitoring PLe/Kat3/SIL3 is currently not in stock and must be ordered on a per-order basis.

According to our experience the article is ready for dispatch within 8 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Schneider Electric XPSUVN31AP to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you Schneider Electric XPSUVN31AP safety relay standstill monitoring PLe/Kat3/SIL3 always at the best possible price. We can give you a discount of 2% on Schneider Electric XPSUVN31AP safety relay standstill monitoring PLe/Kat3/SIL3 if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 4 pieces of Schneider Electric XPSUVN31AP safety relay standstill monitoring PLe/Kat3/SIL3 we can offer you a price of 475,48 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


This product is recommended as accessory for

Schneider Electric XPSUVN11AP safety relay standstill monitoring PLe/Kat3/SIL3 Schneider Electric LogoSchneider Electric XPSUVN11AP safety relay standstill monitoring PLe/Kat3/SIL3 The Harmony XPS Universal safety relays are characterized by their range of functions and diagnostic capabilities, which reduce downtime in the event of a fault. This safety relay includes safe ...

Lieske Part No.: 673490
Mfg Part No: XPSUVN11AP
483,55 EUR 503,91 EUR
Schneider Electric XPSUVN11AP plus VAT
≈ £404.73  |  ≈ $531.42
Made to order · Delivery time approx. 8 workdaysinfo_outline

Fitting accessory for Schneider Electric XPSUVN31AP safety relay standstill monitoring PLe/Kat3/SIL3

Schneider Electric XPSUVN11AP safety relay standstill monitoring PLe/Kat3/SIL3 Schneider Electric LogoSchneider Electric XPSUVN11AP safety relay standstill monitoring PLe/Kat3/SIL3 The Harmony XPS Universal safety relays are characterized by their range of functions and diagnostic capabilities, which reduce downtime in the event of a fault. This safety relay includes safe ...

Lieske Part No.: 673490
Mfg Part No: XPSUVN11AP
483,55 EUR 503,91 EUR
Schneider Electric XPSUVN11AP plus VAT
≈ £404.73  |  ≈ $531.42
Made to order · Delivery time approx. 8 workdaysinfo_outline
Schneider Electric XPSES safety relay replacement latching bands Schneider Electric LogoSchneider Electric XPSES safety relay replacement latching bands Safety relay Harmony XPS accessories. To protect the settings on the XPSB and XPSU safety relays, the transparent front cover can be locked against opening using this tape. Each sealing tape is ...

Lieske Part No.: 1778267
Mfg Part No: XPSES
8,08 EUR 8,42 EUR
Schneider Electric XPSES plus VAT
≈ £6.76  |  ≈ $8.88
Made to order · Delivery time approx. 8 workdaysinfo_outline
Schneider Electric XPSEC safety relay coding bits for terminal blocks Schneider Electric LogoSchneider Electric XPSEC safety relay coding bits for terminal blocks Safety relay Harmony XPS accessories. The removable terminal blocks of the XPSB and XPSU safety relays can be protected against being mixed up with these optional coding bits. The bits are used to ...

Lieske Part No.: 1778268
Mfg Part No: XPSEC
7,48 EUR 7,79 EUR
Schneider Electric XPSEC plus VAT
≈ £6.26  |  ≈ $8.22
Made to order · Delivery time approx. 8 workdaysinfo_outline
Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Schneider Electric XPSUVN31AP safety relay stall monitoring
Schneider Electric XPSUVN31AP safety relay standstill monitoring PLe/Kat3/SIL3
494,00 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Schneider Electric XPSUVN31AP safety relay stall monitoring
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
5 + 9 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.