Schneider Electric MTN6003-0012 SpaceLogic KNX blind/switch actuator 2-way UP

1-way blind actuator or 2-way switch actuator with three binary inputs for installation in a 60 mm switch box. Potential-free contacts can be connected to the three inputs. An NTC temperature sensor can optionally be connected to the third input. The inputs and the KNX are connected via a 6-core, approx. 30 cm long connecting cable. KNX software functions: Blind actuator functions: The connecting cable for the inputs can be extended to a maximum of 10 m. KNX Secure compatible. Operating mode: blinds, roller shutters, awnings or ventilation flaps. Up or down times with extension for the upper end position. Status feedback of the position or slat position. Active/passive status feedback, cyclical status feedback function. Up to 5 safety functions (3 wind alarms, 1 rain alarm, 1 frost alarm). Cyclic monitoring. Sun protection function with fixed and variable positions. Shading control with automatic heating/cooling operation and presence function. Behavior in the event of a bus voltage failure/return. Delay in status feedback after bus voltage return. Priority function. Scene function (64). Storage function for scenes. Input function: Free assignment of the functions switching, dimming, blind and value transmitter. Locking object. Behavior in the event of bus voltage return. Temperature, brightness, color temperature.Switching: two switching objects per input. Command on rising/falling edge (ON, OFF, TOGGLE, no reaction). Dimming: Single-surface and two-surface operation. Time between dimming and switching and dimming step values. Telegram repetition and send stop telegram. Blind: Command on rising edge (none, UP, DOWN, TOGGLE), operating concept (Step - Move - Step or Move - Step). Time between short and long operation. Slat adjustment time. Value transmitter and scene ext. Input: edge (button as normally open contact, button as normally closed contact, switch) and value on edge. Value adjustment via long button operation for value transmitter. Scene ext. unit with memory function. Logic module: link, converter, blocking element, comparator, limit value. Nominal voltage: AC 230 V. Nominal current: ¿ 16 A, resistive load. Switching contact: normally open contact, potential-free relay contact. Nominal power motor: AC 230 V, max. 1380 W Incandescent lamps: AC 230 V, max. 2500 W Halogen lamps: AC 230 V, max. 2500 W HV-LED lamps: AC 230 V, max. 400 W Resistive load: AC 230 V, 2500 W Capacitive load: AC 230 V, 16 A, max. ¿140 µF. Low voltage halogen lamps: max. 1200 VA wound transformer, max. 1500 W electronic transformers.Fluorescent lamps:¿AC 230 V, max. 1000 W, uncompensated / AC 230 V, max. 1160 W (140 µF) with parallel compensation.Inputs: 3. Dimensions: 48x50x28 (WxHxD).Note: For installation in a double box/electronic box (Kaiser). Maintain a distance of at least 4 mm between the 230 V connection and the connection for the KNX/inputs (SELV).
Type: MTN6003-0012