Schneider Electric IMDIFL12L Vigilohm Advanced 12-channel fault location device 24–48 V DC
|
3.417,15 EUR 3.561,03 EUR |
|||||||||||
|
( 4.066,41 EUR incl. VAT ) ≈ £2,856.74 | ≈ $3,775.95 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 8 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 894282 | ||||||||||
| Mfg Part No: | IMDIFL12L | ||||||||||
| UPC/EAN: | 3606489504847 | ||||||||||
| Weight: | 0.491 kg | ||||||||||
| Type: | IMDIFL12L | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Schneider Electric IMDIFL12L:
| Additional features | |
| Alarm threshold setting | Alarm: high, medium, low |
| Measured value type | Network insulation resistance, range: 200 Ohm to 250 kOhm |
| Alarm per channel | Alarm threshold: for all outlets |
| Configurable filter time | 5 s; 40 s |
| [tA] Response time | 1 s 1/5th of set filtering time; 8 s 1/5th of set filtering time |
| Power quality analysis | Transient capture |
| Monitoring function | Detection of toroids connection automatic; Detection of toroids connection Manual mode; Detection of IM400 injection current permanent |
| Self-test | Manual; Automatic test at start-up and every 5 hours |
| Over voltage category | III 300 V; II 600 V |
| Degree of protection (IP) | Housing: IP20; front: IP54 |
| Material | Thermoplastic |
| Communication & Management | |
| Display type | Without display |
| Local signalling | Yellow indicator lamp: insulation fault; green/red indicator lamp: product status; green indicator lamp: satisfactory insulation; yellow flashing indicator lamp: transient fault; green indicator lamp: configured threshold LED; green indicator lamp: configured filter LED; yellow steady light 1 LED per channel: insulation fault; yellow flashing light 1 LED per channel: transient fault/transformer disconnected |
| Output contact | 1 changeover contact standard |
| Breaking capacity | 250 V - AC at 6 A; 48 V - DC at 1 A |
| Communications protocol | - |
| Contractual warranty | |
| Warranty (in months) | 18 |
| Dimensions | |
| Installation type | Indoor |
| Relative humidity | 5…92 % |
| Operating ambient temperature | -25…70 °C |
| Ambient temperature during storage | -40…85 °C |
| Pollution degree | 2 |
| Mounting mode | DIN rail mountable; Flush mount (plate) |
| Mounting position | Vertical; Horizontal |
| Connections - terminals | Power supply: removable screw terminal block 0.2…2.5 mm²; Relay output: removable screw terminal block 0.2…2.5 mm²; Ring transformer inputs: removable screw terminal block 0.2…1.5 mm² |
| Product weight | 0,28 kg |
| Cutout dimensions | 92 x 104 mm |
| Height | 110 mm |
| Width | 108 mm |
| Depth | 59 mm |
| Main features | |
| Product series | Vigilohm |
| Device short name | IFL12L |
| Product or component type | Insulation fault detector |
| Earthing system | IT; HRG |
| Application | Marine and offshore; Industry; Infrastructure; Power generation; Port, airport, railway |
| Type of electrical circuit | Medium |
| Circuit type | Circuit |
| Network capacitance | Lightly capacitive |
| Type of network | 1P + N; 3P; 3P + N |
| Supply voltage | 0…1000 V - AC at 45 - 65 Hz; 0…1000 V - DC |
| Number of channels | 12 |
| Packaging units | |
| VPE 1 type | PCE |
| Number of devices per package | 1 |
| VPE 1 height | 10,300 cm |
| VPE 1 width | 14,000 cm |
| VPE 1 length | 18,500 cm |
| Packaging weight (Lbs) | 491,000 g |
| VPE 2 type | S03 |
| VPE 2 quantity | 8 |
| VPE 2 height | 30,000 cm |
| VPE 2 width | 30,000 cm |
| VPE 2 length | 40,000 cm |
| VPE 2 weight | 4,732 kg |
| Performance requirements | |
| [UH,nom] Rated operating voltage | 24 - 48 V DC Tolerance: ± 15 % |
| Power consumption in W | 8 W |
| Over current protection | 1 A |
| Standards | |
| Standards | IEC 60364-4-41; IEC 61010-1; IEC 60364-5-51; IEC 61557-9; IEC 61557-15; IEC 61326-2-4; UL 61010-1 |
| Product certifications | EAC; CE; UL; cULus |
| Environmental properties | Humid heat, out of operation corresponds to IEC 60068-2-30; humid heat, in operation corresponds to IEC 60068-2-56; salt mist corresponds to IEC 60068-2-52; long-term storage class 1K22 corresponds to IEC 60721-3-1; transport class 2K11 corresponds to IEC 60721-3-2; stationary use at weather protected locations class 3K24 corresponds to IEC 60721-3-3 |
| Mechanical robustness | Long-term storage class 1M11 corresponds to IEC 60721-3-1; Transport class 2M4 corresponds to IEC 60721-3-2; Stationary use class 3M11 corresponds to IEC 60721-3-3 |
Questions & answers
What is the delivery time of Schneider Electric IMDIFL12L Vigilohm Advanced 12-channel fault location device 24–48 V DC?
The article Schneider Electric IMDIFL12L Vigilohm Advanced 12-channel fault location device 24–48 V DC is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 8 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Schneider Electric IMDIFL12L to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Schneider Electric IMDIFL12L Vigilohm Advanced 12-channel fault location device 24–48 V DC always at the best possible price. We can give you a discount of 2% on Schneider Electric IMDIFL12L Vigilohm Advanced 12-channel fault location device 24–48 V DC if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 2 pieces of Schneider Electric IMDIFL12L Vigilohm Advanced 12-channel fault location device 24–48 V DC we can offer you a price of 3.314,64 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
This product is recommended as accessory for
|
Schneider Electric IMD-IM400 VIGILOhm insulation monitor 110–440 V AC
This device belongs to the Vigilohm range designed for the monitoring of unearthed power supplies (IT systems) in accordance with installation and product standards. According to the standards, it is ...Lieske Part No.: 581202 Mfg Part No: IMD-IM400 |
6.682,30 EUR 6.963,66 EUR
![]() ≈ £5,586.40 | ≈ $7,383.94
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric 50439 toroidal transformer IA80
This toroid is designed for Vigilohm insulation fault locators and VigiPacT type A residual current protection and monitoring relays. It allows monitoring the fed component of Vigilohm Insulation ...Lieske Part No.: 598753 Mfg Part No: 50439 |
584,25 EUR 605,28 EUR
![]() ≈ £488.43 | ≈ $645.60
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric 50440 ring core transformer MA120
This toroid is designed for Vigilohm insulation fault locators and VigiPacT type A residual current protection and monitoring relays. It allows monitoring the fed component of Vigilohm Insulation ...Lieske Part No.: 598760 Mfg Part No: 50440 |
836,00 EUR 866,10 EUR
![]() ≈ £698.90 | ≈ $923.78
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric 50438 converter
This toroid is designed for Vigilohm insulation fault locators and VigiPacT type A residual current protection and monitoring relays. It allows monitoring the fed component of Vigilohm Insulation ...Lieske Part No.: 598764 Mfg Part No: 50438 |
491,15 EUR 508,83 EUR
![]() ≈ £410.60 | ≈ $542.72
Made to order · Delivery time approx. 12 workdaysinfo_outline
|
|
Schneider Electric 50437 toroidal transformer TA30
This toroid is designed for Vigilohm insulation fault locators and VigiPacT type A residual current protection and monitoring relays. It allows monitoring the fed component of Vigilohm Insulation ...Lieske Part No.: 598768 Mfg Part No: 50437 |
349,60 EUR 362,19 EUR
![]() ≈ £292.27 | ≈ $386.31
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric IMD-IM400C Vigilohm insulation monitoring device
Dieses Gerät gehört zur Vigilohm Reihe, die für die Überwachung von ungeerdeten Energieversorgungen (IT-Systeme) gemäß den Installations- und Produktnormen entwickelt wurde. Gemäß den Normen ...Lieske Part No.: 894278 Mfg Part No: IMD-IM400C |
7.060,40 EUR 7.357,68 EUR
![]() ≈ £5,902.49 | ≈ $7,801.74
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric IMDIM400L Vigilohm insulation monitoring device
Dieses Gerät gehört zur Vigilohm Reihe, die für die Überwachung von ungeerdeten Energieversorgungen (IT-Systeme) gemäß den Installations- und Produktnormen entwickelt wurde. Gemäß den Normen ...Lieske Part No.: 894323 Mfg Part No: IMDIM400L |
6.882,75 EUR 7.172,55 EUR
![]() ≈ £5,753.98 | ≈ $7,605.44
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric 50420 TOA80 residual current transformer divisible
This toroid is designed for Vigilohm insulation fault locators and VigiPacT type A residual current protection and monitoring relays. It allows monitoring the fed component of Vigilohm Insulation ...Lieske Part No.: 1865888 Mfg Part No: 50420 |
1.867,70 EUR 1.946,34 EUR
![]() ≈ £1,561.40 | ≈ $2,063.81
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric 50421 TOA120 residual current transformer split
This toroid is designed for Vigilohm insulation fault locators and VigiPacT type A residual current protection and monitoring relays. It allows monitoring the fed component of Vigilohm Insulation ...Lieske Part No.: 1865889 Mfg Part No: 50421 |
2.135,60 EUR 2.225,52 EUR
![]() ≈ £1,785.36 | ≈ $2,359.84
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
Fitting accessory for Schneider Electric IMDIFL12L Vigilohm Advanced 12-channel fault location device 24–48 V DC
|
Schneider Electric IMD-IM400 VIGILOhm insulation monitor 110–440 V AC
This device belongs to the Vigilohm range designed for the monitoring of unearthed power supplies (IT systems) in accordance with installation and product standards. According to the standards, it is ...Lieske Part No.: 581202 Mfg Part No: IMD-IM400 |
6.682,30 EUR 6.963,66 EUR
![]() ≈ £5,586.40 | ≈ $7,383.94
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric 50439 toroidal transformer IA80
This toroid is designed for Vigilohm insulation fault locators and VigiPacT type A residual current protection and monitoring relays. It allows monitoring the fed component of Vigilohm Insulation ...Lieske Part No.: 598753 Mfg Part No: 50439 |
584,25 EUR 605,28 EUR
![]() ≈ £488.43 | ≈ $645.60
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric 50440 ring core transformer MA120
This toroid is designed for Vigilohm insulation fault locators and VigiPacT type A residual current protection and monitoring relays. It allows monitoring the fed component of Vigilohm Insulation ...Lieske Part No.: 598760 Mfg Part No: 50440 |
836,00 EUR 866,10 EUR
![]() ≈ £698.90 | ≈ $923.78
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric 50438 converter
This toroid is designed for Vigilohm insulation fault locators and VigiPacT type A residual current protection and monitoring relays. It allows monitoring the fed component of Vigilohm Insulation ...Lieske Part No.: 598764 Mfg Part No: 50438 |
491,15 EUR 508,83 EUR
![]() ≈ £410.60 | ≈ $542.72
Made to order · Delivery time approx. 12 workdaysinfo_outline
|
|
Schneider Electric 50437 toroidal transformer TA30
This toroid is designed for Vigilohm insulation fault locators and VigiPacT type A residual current protection and monitoring relays. It allows monitoring the fed component of Vigilohm Insulation ...Lieske Part No.: 598768 Mfg Part No: 50437 |
349,60 EUR 362,19 EUR
![]() ≈ £292.27 | ≈ $386.31
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric IMD-IM400C Vigilohm insulation monitoring device
Dieses Gerät gehört zur Vigilohm Reihe, die für die Überwachung von ungeerdeten Energieversorgungen (IT-Systeme) gemäß den Installations- und Produktnormen entwickelt wurde. Gemäß den Normen ...Lieske Part No.: 894278 Mfg Part No: IMD-IM400C |
7.060,40 EUR 7.357,68 EUR
![]() ≈ £5,902.49 | ≈ $7,801.74
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric IMDIM400L Vigilohm insulation monitoring device
Dieses Gerät gehört zur Vigilohm Reihe, die für die Überwachung von ungeerdeten Energieversorgungen (IT-Systeme) gemäß den Installations- und Produktnormen entwickelt wurde. Gemäß den Normen ...Lieske Part No.: 894323 Mfg Part No: IMDIM400L |
6.882,75 EUR 7.172,55 EUR
![]() ≈ £5,753.98 | ≈ $7,605.44
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric 50420 TOA80 residual current transformer divisible
This toroid is designed for Vigilohm insulation fault locators and VigiPacT type A residual current protection and monitoring relays. It allows monitoring the fed component of Vigilohm Insulation ...Lieske Part No.: 1865888 Mfg Part No: 50420 |
1.867,70 EUR 1.946,34 EUR
![]() ≈ £1,561.40 | ≈ $2,063.81
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric 50421 TOA120 residual current transformer split
This toroid is designed for Vigilohm insulation fault locators and VigiPacT type A residual current protection and monitoring relays. It allows monitoring the fed component of Vigilohm Insulation ...Lieske Part No.: 1865889 Mfg Part No: 50421 |
2.135,60 EUR 2.225,52 EUR
![]() ≈ £1,785.36 | ≈ $2,359.84
Made to order · Delivery time approx. 8 workdaysinfo_outline
|










