Schneider Electric ILS1M853PB1A0 drive+stepper motor 24-36V I/O for motion sequence 5A
|
1.439,44 EUR 1.502,03 EUR |
|
|
( 1.712,93 EUR incl. VAT ) ≈ £1,200.49 | ≈ $1,607.85 plus delivery charges: 100,00 € |
|
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |
| Lieske Part No.: | 637275 |
|---|---|
| Mfg Part No: | ILS1M853PB1A0 |
| UPC/EAN: | 3389119227339 |
| Weight: | 5.824 kg |
| Type: | ILS1M853PB1A0 |
Further Engines and accessories from Schneider ElectricFurther products in category Engines and accessories
All products of Schneider Electric
Product information for Schneider Electric ILS1M853PB1A0:
Integrierter Schrittmotor der Reihe Lexium ILS1. Diese Reihe dezentraler Antriebe besteht aus einer kompakten Einheit des 3-Phasen-Schrittmotors mit zugehörigen Ansteuerelektronik bei geringen Abmessungen. Diese Motoren zeichnet sich durch das hohe Dauerstillstandsmoment aus. Diese Motoren zeichnet sich durch die ein hohes Dauerstillstandsmoment und gute Gleichlaufeigenschaften aus. Dieser Schrittmotor hat ein maximales Drehmoment und Haltemoment von 6 Nm. Die Wicklung ist für mittlere Drehzahlen ausgelegt. Über eine E/A-Schnittstelle erfolgt die Ansteuerung für Bewegungssequenzen. Das Messsystem überträgt ein Indexpuls. Als Sicherheitsfunktion stehen Steuereingänge für STO zur Verfügung. Die Versorgungsspannung 24-36 VDC und das Flanschmass zur Befestigung 57 mm. Für den Anschluss sind Leiterplattensteckverbinder vorhanden. Es ist keine Bremse vorhanden. Zur Unterstützung Ihrer Nachhaltigkeitsziele werden detaillierte Informationen zu Materialinhalten, Umweltauswirkungen und Kreislaufwirtschaft bereitgestellt.
| Complementary | |
| Transmission rate | 9.6, 19.2 and 38.4 kbauds |
| Mounting support | Flange |
| Motor flange size | 85 mm |
| Number of motor stacks | 3 |
| Centring collar diameter | 60 mm |
| Centring collar depth | 2 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 6.5 mm |
| Circle diameter of the mounting holes | 99 mm |
| Feedback type | Index pulse |
| Shaft end | Untapped |
| Second shaft | Without second shaft end |
| Shaft diameter | 14 mm |
| Shaft length | 30 mm |
| Supply voltage limits | 18…40 V |
| Current consumption | 5000 mA maximum continuous |
| Associated fuse rating | 10 A |
| Commissioning interface | RS485 (9.6, 19.2 and 38.4 kbauds) |
| Input/output type | 4 signals (each be used as input or output) |
| Voltage state 0 guaranteed | -3...4.5 V |
| Voltage state 1 guaranteed | 15...30 V |
| Discrete input current | 10 mA at 24 V on/STO_A for safety input; 3 mA at 24 V on/STO_B for safety input; 10 mA at 24 V for 24 V signal interface |
| Discrete output voltage | 10...30 V |
| Maximum switching current | 100 mA per output; 200 mA total |
| Protection type | Safe torque off; Overload of output voltage; Short circuit of the output voltage |
| Peak stall torque | 6 N.m |
| Continuous stall torque | 6 N.m |
| Speed feedback resolution | 20000 points/turn |
| Accuracy error | +/- 6 arc min |
| Rotor inertia | 3.3 kg.cm² |
| Maximum mechanical speed | 1000 rpm |
| Maximum radial force Fr | 110 N |
| Maximum axial force Fa | 170 N (tensile force); 30 N (force pressure) |
| Service life in hours | 20000 h bearing |
| Marking | CE |
| Type of cooling | Natural convection |
| Net weight | 4.7 kg |
| Contractual warranty | |
| Warranty (in months) | 18 |
| Environment | |
| Standards | EN 61800-3 : 2001-02; IEC 60072-1; EN 61800-3:2001, second environment; IEC 50347; IEC 50178; IEC 61800-3, Ed 2; IEC 61800-3 |
| Product certifications | TÜV; cUL; UL |
| Ambient air temperature for operation | 50…65 °C (with power derating of 2 % per °C); 0…50 °C (without derating) |
| Permissible ambient air temperature around the device | 110 °C motor |
| Ambient air temperature for storage | -25…70 °C |
| Relative humidity | 15…85 % without condensation |
| Vibration resistance | 20 m/s² (f= 10…500 Hz) 10 cycles conforming to IEC 60068-2-6 |
| Shock resistance | 150 m/s² 1000 shocks conforming to IEC 60068-2-29 |
| IP degree of protection | IP41 shaft bushing: conforming to IEC 60034-5; IP54 total except shaft bushing: conforming to IEC 60034-5 |
| Logistical informations | |
| Country of origin | DE |
| Main | |
| Range of product | Lexium integrated drive |
| Product or component type | Motion integrated drive |
| Device short name | ILS |
| Motor type | 3-phase stepper motor |
| Number of motor poles | 6 |
| Network number of phases | Single phase |
| [Us] rated supply voltage | 24 V; 36 V |
| Network type | DC |
| Communication interface | I/O for motion sequence, integrated |
| Length | 200.6 mm |
| Winding type | Medium speed of rotation and medium torque |
| Electrical connection | Printed circuit board connector |
| Holding brake | Without |
| Gear box type | Without |
| Nominal speed | 120 rpm at 36 V; 60 rpm at 24 V |
| Nominal torque | 6 N.m |
| Holding torque | 6 N.m |
| Packing Units | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 22 cm |
| Package 1 Width | 19.5 cm |
| Package 1 Length | 40 cm |
| Package 1 Weight | 5.824 kg |
| Unit Type of Package 2 | S06 |
| Number of Units in Package 2 | 9 |
| Package 2 Height | 73.5 cm |
| Package 2 Width | 60 cm |
| Package 2 Length | 80 cm |
| Package 2 Weight | 65.416 kg |
Questions & answers
What is the delivery time of Schneider Electric ILS1M853PB1A0 drive+stepper motor 24-36V I/O for motion sequence 5A?
The article Schneider Electric ILS1M853PB1A0 drive+stepper motor 24-36V I/O for motion sequence 5A is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Schneider Electric ILS1M853PB1A0 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Schneider Electric ILS1M853PB1A0 drive+stepper motor 24-36V I/O for motion sequence 5A always at the best possible price. We can give you a discount of 2% on Schneider Electric ILS1M853PB1A0 drive+stepper motor 24-36V I/O for motion sequence 5A if you choose payment in advance on ordering.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
Fitting accessory for Schneider Electric ILS1M853PB1A0 drive+stepper motor 24-36V I/O for motion sequence 5A
 |
Schneider Electric GBK0800853S KIT GBX-GBY80 BRS39B
In many cases, axis control requires the use of a planetary gearbox to adjust speeds and torques while maintaining the precision required by the application. To meet these requirements, Schneider ... Lieske Part No.: 267955 Mfg Part No: GBK0800853S |
111,02 EUR 115,85 EUR
 ≈ £92.59 | ≈ $124.01
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric GBX080005K gear unit PLE080 I=5
In many cases, axis control requires the use of a planetary gearbox to adjust speeds and torques while maintaining the precision required by the application. To meet these requirements, Schneider ... Lieske Part No.: 333797 Mfg Part No: GBX080005K |
433,24 EUR 452,08 EUR
≈ £361.32 | ≈ $483.93
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric GBY080003K right-angle gearbox WPLE080 I=3
In many cases, axis control requires the use of a planetary gearbox to adjust speeds and torques while maintaining the precision required by the application. To meet these requirements, Schneider ... Lieske Part No.: 360335 Mfg Part No: GBY080003K |
899,00 EUR 938,09 EUR
≈ £749.77 | ≈ $1,004.18
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric GBX080012K gear PLE080 I=12
In many cases, axis control requires the use of a planetary gearbox to adjust speeds and torques while maintaining the precision required by the application. To meet these requirements, Schneider ... Lieske Part No.: 510110 Mfg Part No: GBX080012K |
538,94 EUR 562,37 EUR
≈ £449.48 | ≈ $602.00
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric GBX080003K gearbox PLE080 I=3 I=3
In many cases, axis control requires the use of a planetary gearbox to adjust speeds and torques while maintaining the precision required by the application. To meet these requirements, Schneider ... Lieske Part No.: 510163 Mfg Part No: GBX080003K |
433,24 EUR 452,08 EUR
≈ £361.32 | ≈ $483.93
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric GBX080004K gear PLE080 I=4
In many cases, axis control requires the use of a planetary gearbox to adjust speeds and torques while maintaining the precision required by the application. To meet these requirements, Schneider ... Lieske Part No.: 510952 Mfg Part No: GBX080004K |
433,24 EUR 452,08 EUR
≈ £361.32 | ≈ $483.93
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric GBX080008K gearbox PLE080 I=8
In many cases, axis control requires the use of a planetary gearbox to adjust speeds and torques while maintaining the precision required by the application. To meet these requirements, Schneider ... Lieske Part No.: 608235 Mfg Part No: GBX080008K |
433,24 EUR 452,08 EUR
≈ £361.32 | ≈ $483.93
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric GBY080005K right-angle gearbox WPLE080 I=5
In many cases, axis control requires the use of a planetary gearbox to adjust speeds and torques while maintaining the precision required by the application. To meet these requirements, Schneider ... Lieske Part No.: 608239 Mfg Part No: GBY080005K |
896,68 EUR 935,66 EUR
≈ £747.83 | ≈ $1,001.59
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric GBX080015K gearbox PLE080 I=15
In many cases, axis control requires the use of a planetary gearbox to adjust speeds and torques while maintaining the precision required by the application. To meet these requirements, Schneider ... Lieske Part No.: 608277 Mfg Part No: GBX080015K |
538,94 EUR 562,37 EUR
≈ £449.48 | ≈ $602.00
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric VW3L10111 ILX installation set SET
Accessories for the integrated drives Lexium ILA, ILE and ILS. Installation set for connecting the communication bus, power supply and safety function STO. It includes the cable feedthrough, Cimp ... Lieske Part No.: 609330 Mfg Part No: VW3L10111 |
77,63 EUR 80,76 EUR
≈ £64.74 | ≈ $86.71
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric VW3L2M211R30 ILX cable set 3 m 5E/A 1STO insert for motion sequence
Accessories for the integrated drives Lexium ILS1. Pre-assembled cable sets for connecting the power supply, the I/O interface for the motion sequence and the safety function STO to drives with PCB ... Lieske Part No.: 609347 Mfg Part No: VW3L2M211R30 |
374,90 EUR 378,65 EUR
≈ £312.67 | ≈ $418.76
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric VW3L10100N2 2x cable glands D3-9 mm for integrated drives
Accessories for the integrated drives Lexium ILA, ILE and ILS for drives with PCB connectors. 4 cable grommets per insert for 4 diameters 3 to 9 mm. The cable bushing is used for sealing, strain ... Lieske Part No.: 655329 Mfg Part No: VW3L10100N2 |
35,42 EUR 36,85 EUR
≈ £29.54 | ≈ $39.56
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric VW3L10222 cable entry D5–9 mm IP54 2×M16
Zubehör für die integrierten Antriebe Lexium ILA, ILE und ILS. Set mit Kabeldurchführung und Einschub zur Abdichtung konform Schutzart IP54. Es beinhaltet 1 Einschub zur Abdichtung und 1 Einschub ... Lieske Part No.: 939487 Mfg Part No: VW3L10222 |
114,89 EUR 119,52 EUR
≈ £95.82 | ≈ $128.33
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric VW3L10000N10 seal for IP54 protection
Zubehör für die integrierten Antriebe Lexium ILA, ILE und ILS. Einsatz zur Abdichung konform Schutzart IP54. Pro Antrieb sind 2 Einsätze erforderlich. Verpackungseinheit sind 10 Stück. Lieske Part No.: 939666 Mfg Part No: VW3L10000N10 |
135,70 EUR 141,17 EUR
≈ £113.17 | ≈ $151.58
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric GBY080008K right-angle gear WPLE080 I=8
In vielen Fällen erfordert die Achssteuerung den Einsatz eines Planetengetriebeszur Anpassung von Drehzahlen und Drehmomenten, wobei gleichzeitig die von derAnwendung geforderte Präzision ... Lieske Part No.: 953846 Mfg Part No: GBY080008K |
899,00 EUR 938,09 EUR
≈ £749.77 | ≈ $1,004.18
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric GBX080016K gear straight gearing D80 mm gear ratio 16:1
In many cases, axis control requires the use of a planetary gearbox to adjust speeds and torques while maintaining the precision required by the application. To meet these requirements, Schneider ... Lieske Part No.: 1330567 Mfg Part No: GBX080016K |
538,94 EUR 562,37 EUR
≈ £449.48 | ≈ $602.00
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric GBX080025K gear straight gearing D80 mm reduction ratio 25:1
In many cases, axis control requires the use of a planetary gearbox to adjust speeds and torques while maintaining the precision required by the application. To meet these requirements, Schneider ... Lieske Part No.: 1565611 Mfg Part No: GBX080025K |
538,94 EUR 562,37 EUR
≈ £449.48 | ≈ $602.00
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric GBX080009K gear straight gearing D80 mm reduction 9:1
In many cases, axis control requires the use of a planetary gearbox to adjust speeds and torques while maintaining the precision required by the application. To meet these requirements, Schneider ... Lieske Part No.: 1768319 Mfg Part No: GBX080009K |
538,94 EUR 562,37 EUR
≈ £449.48 | ≈ $602.00
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric GBX080020K gear straight gearing D80 mm reduction ratio 20:1
In many cases, axis control requires the use of a planetary gearbox to adjust speeds and torques while maintaining the precision required by the application. To meet these requirements, Schneider ... Lieske Part No.: 1768320 Mfg Part No: GBX080020K |
538,94 EUR 562,37 EUR
≈ £449.48 | ≈ $602.00
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric GBY080004K right-angle gear drive spur gear D80 mm gear ratio 4:1
In many cases, axis control requires the use of a planetary gearbox to adjust speeds and torques while maintaining the precision required by the application. To meet these requirements, Schneider ... Lieske Part No.: 1768367 Mfg Part No: GBY080004K |
896,68 EUR 935,66 EUR
≈ £747.83 | ≈ $1,001.59
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric GBY080020K right-angle gear unit spur gear D80 mm gear ratio 20:1
In many cases, axis control requires the use of a planetary gearbox to adjust speeds and torques while maintaining the precision required by the application. To meet these requirements, Schneider ... Lieske Part No.: 1768368 Mfg Part No: GBY080020K |
1.080,20 EUR 1.127,16 EUR
≈ £900.89 | ≈ $1,206.58
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric GBY080012K right-angle gear unit straight gearing D80 mm gear ratio 12:1
In many cases, axis control requires the use of a planetary gearbox to adjust speeds and torques while maintaining the precision required by the application. To meet these requirements, Schneider ... Lieske Part No.: 1768369 Mfg Part No: GBY080012K |
1.080,20 EUR 1.127,16 EUR
≈ £900.89 | ≈ $1,206.58
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric VW3L20010R30 cable set for STO signal 3 m
Accessories for the integrated drives Lexium ILA, ILE and ILS. Pre-assembled cable sets for connecting the STO safety function to drives with PCB connectors. On one side the cable has a plug for ... Lieske Part No.: 1768459 Mfg Part No: VW3L20010R30 |
143,75 EUR 149,55 EUR
≈ £119.89 | ≈ $160.57
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric VW3L2M001R30 cable set E/A signals for motion sequence 3 m
Accessories for the integrated drives Lexium ILS1. Pre-assembled cable sets for connecting the power supply and the I/O interface for the motion sequence to drives with PCB connectors. On the side of ... Lieske Part No.: 1768462 Mfg Part No: VW3L2M001R30 |
144,90 EUR 150,74 EUR
≈ £120.85 | ≈ $161.85
Made to order · Delivery time approx. 20 workdaysinfo_outline
|