Schneider Electric ILE2T661PC1A7 EC motor 24-48 V Modbus TCP interface L174 mm 92:1
|
2.664,60 EUR 2.780,45 EUR |
|
|
( 3.170,87 EUR incl. VAT ) ≈ £2,222.28 | ≈ $2,976.36 plus delivery charges: 55,00 € |
|
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |
| Lieske Part No.: | 637259 |
|---|---|
| Mfg Part No: | ILE2T661PC1A7 |
| UPC/EAN: | 3606485189352 |
| Weight: | 2.8 kg |
| Type: | ILE2T661PC1A7 |
Product information for Schneider Electric ILE2T661PC1A7:
Integrierter Antrieb der Reihe Lexium ILE2. Diese Reihe dezentraler Antriebe besteht aus einer kompakten Einheit des bürstenlosen DC-Motors und der zugehörigen Ansteuerelektronik bei geringen Abmessungen. Diese Motoren zeichnet sich durch ein hohes stromloses Selbsthaltemoment aus. Dieser EC-Motor hat ein maximales Drehmoment von 0,43 Nm sowie ein Selbsthaltemoment von 0,08 Nm. Die spannungsabhängige Drehzahl beträgt bis zu 6000 U/min. Über den Feldbus Modbus TCP erfolgt die Ansteuerung. Ein Singleturn-Encoder mit 12 Punkte/Umdrehung ist als Messsystem vorhanden. Als Sicherheitsfunktion stehen Steuereingänge für STO zur Verfügung. Die Versorgungsspannung 24-48 VDC und das Flanschmass zur Befestigung 66 mm. Für den Anschlusss sind Industriesteckverbinder vorhanden. Ein Winkelschneckengetriebe mit einer Untersetzung 92:1 ist am EC-Motor montiert. Zur Unterstützung Ihrer Nachhaltigkeitsziele werden detaillierte Informationen zu Materialinhalten, Umweltauswirkungen und Kreislaufwirtschaft bereitgestellt.
| Complementary | |
| Transmission rate | 10, 100 Mbits |
| Mounting support | Flange |
| Motor flange size | 66 mm |
| Number of motor stacks | 1 |
| Centring collar diameter | 36 mm |
| Number of mounting holes | 2 |
| Mounting holes diameter | 4.4 mm |
| Feedback type | BLDC encoder |
| Shaft end | Hole |
| Second shaft | Without second shaft end |
| Supply voltage limits | 18…55.2 V |
| Current consumption | 7000 mA peak; 5500 mA maximum continuous |
| Associated fuse rating | 16 A |
| Commissioning interface | RS485 Modbus TCP (9.6, 19.2 and 38.4 kbauds) |
| Input/output type | 4 signals (each be used as input or output) |
| Voltage state 0 guaranteed | -3...4.5 V |
| Voltage state 1 guaranteed | 15...30 V |
| Discrete input current | 10 mA at 24 V on/STO_A for safety input; 3 mA at 24 V on/STO_B for safety input; 2 mA at 24 V for 24 V signal interface |
| Discrete output voltage | 23...25 V |
| Maximum switching current | 100 mA per output; 200 mA total |
| Protection type | Short circuit of the output voltage; Overload of output voltage; Safe torque off |
| Maximum supply current | 0.1 A (power stage disabled); 6.8 A at 24 V; 2.6 A at 48 V |
| Nominal output power | 41 W at 24 V; 42 W at 48 V |
| Peak stall torque | 19.78 N.m at 24 V; 19.78 N.m at 48 V |
| Continuous stall torque | 11.6 N.m |
| Detent torque | 12.3 N.m |
| Speed feedback resolution | 12 points/turn motor; 0.33° gearbox output |
| Accuracy error | +/- 1 point |
| Rotor inertia | 1270 kg.cm² |
| Maximum mechanical speed | 54 rpm |
| Maximum radial force Fr | 200 N |
| Maximum axial force Fa | 80 N |
| Service life in hours | 9000 h bearing |
| Marking | CE |
| Type of cooling | Natural convection |
| Net weight | 2.3 kg |
| Contractual warranty | |
| Warranty (in months) | 18 |
| Environment | |
| Standards | EN 61800-3 : 2001-02; IEC 60072-1; IEC 50178; IEC 50347; IEC 61800-3, Ed 2; EN 61800-3:2001, second environment; IEC 61800-3 |
| Product certifications | UL; TÜV; cUL |
| Ambient air temperature for operation | 40…55 °C (with power derating of 2 % per °C); 0…40 °C (without derating) |
| Permissible ambient air temperature around the device | 105 °C power amplifier; 110 °C motor |
| Ambient air temperature for storage | -25…70 °C |
| Relative humidity | 15…85 % without condensation |
| Vibration resistance | 20 m/s² (f= 10…500 Hz) 10 cycles conforming to IEC 60068-2-6 |
| Shock resistance | 150 m/s² 1000 shocks conforming to IEC 60068-2-29 |
| IP degree of protection | IP41 shaft bushing: conforming to IEC 60034-5; IP54 total except shaft bushing: conforming to IEC 60034-5 |
| Main | |
| Range of product | Lexium integrated drive |
| Product or component type | Motion integrated drive |
| Device short name | ILE |
| Motor type | Brushless DC motor |
| Number of motor poles | 6 |
| Network number of phases | Single phase |
| [Us] rated supply voltage | 24 V; 48 V |
| Network type | DC |
| Communication interface | Modbus TCP, integrated |
| Length | 229 mm |
| Winding type | Medium speed of rotation and medium torque |
| Electrical connection | Industrial connector |
| Holding brake | Without |
| Gear box type | Worm gear, 3 stages |
| Reduction ratio | 92:1 (735:5) |
| Nominal speed | 44 rpm at 24 V; 44 rpm at 48 V |
| Nominal torque | 9.2 N.m at 24 V; 9.2 N.m at 48 V |
| Packing Units | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 10.400 cm |
| Package 1 Width | 18.000 cm |
| Package 1 Length | 36.500 cm |
| Package 1 Weight | 2.800 kg |
| Unit Type of Package 2 | S04 |
| Number of Units in Package 2 | 6 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 40.000 cm |
| Package 2 Length | 60.000 cm |
| Package 2 Weight | 17.952 kg |
Questions & answers
What is the delivery time of Schneider Electric ILE2T661PC1A7 EC motor 24-48 V Modbus TCP interface L174 mm 92:1?
The article Schneider Electric ILE2T661PC1A7 EC motor 24-48 V Modbus TCP interface L174 mm 92:1 is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Schneider Electric ILE2T661PC1A7 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Schneider Electric ILE2T661PC1A7 EC motor 24-48 V Modbus TCP interface L174 mm 92:1 always at the best possible price. We can give you a discount of 2% on Schneider Electric ILE2T661PC1A7 EC motor 24-48 V Modbus TCP interface L174 mm 92:1 if you choose payment in advance on ordering.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
Fitting accessory for Schneider Electric ILE2T661PC1A7 EC motor 24-48 V Modbus TCP interface L174 mm 92:1
 |
Schneider Electric GBX040008K gear PLE040 I=8
In many cases, axis control requires the use of a planetary gearbox to adjust speeds and torques while maintaining the precision required by the application. To meet these requirements, Schneider ... Lieske Part No.: 510096 Mfg Part No: GBX040008K |
306,64 EUR 319,97 EUR
 ≈ £255.74 | ≈ $342.52
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric GBX060012K gearbox PLE060 I=12
In many cases, axis control requires the use of a planetary gearbox to adjust speeds and torques while maintaining the precision required by the application. To meet these requirements, Schneider ... Lieske Part No.: 608227 Mfg Part No: GBX060012K |
470,41 EUR 490,86 EUR
≈ £392.32 | ≈ $525.45
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric GBX060016K gear unit PLE060 I=16
In many cases, axis control requires the use of a planetary gearbox to adjust speeds and torques while maintaining the precision required by the application. To meet these requirements, Schneider ... Lieske Part No.: 608228 Mfg Part No: GBX060016K |
470,41 EUR 490,86 EUR
≈ £392.32 | ≈ $525.45
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric GBX060025K gear unit PLE060 I=25
In many cases, axis control requires the use of a planetary gearbox to adjust speeds and torques while maintaining the precision required by the application. To meet these requirements, Schneider ... Lieske Part No.: 608247 Mfg Part No: GBX060025K |
469,25 EUR 489,65 EUR
≈ £391.35 | ≈ $524.15
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric GBX060040K gear unit PLE060 I=40
In many cases, axis control requires the use of a planetary gearbox to adjust speeds and torques while maintaining the precision required by the application. To meet these requirements, Schneider ... Lieske Part No.: 608265 Mfg Part No: GBX060040K |
469,25 EUR 489,65 EUR
≈ £391.35 | ≈ $524.15
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric VW3L10111 ILX installation set SET
Accessories for the integrated drives Lexium ILA, ILE and ILS. Installation set for connecting the communication bus, power supply and safety function STO. It includes the cable feedthrough, Cimp ... Lieske Part No.: 609330 Mfg Part No: VW3L10111 |
77,63 EUR 80,76 EUR
≈ £64.74 | ≈ $86.71
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric VW3L30001R30 ILX cable 3 m for supply connection
Accessory for the integrated drives Lexium ILA, ILE and ILS. Pre-assembled cable set for connecting the supply voltage for integrated drives with industrial plugs. There is a plug on the drive side ... Lieske Part No.: 609409 Mfg Part No: VW3L30001R30 |
90,62 EUR 94,27 EUR
≈ £75.58 | ≈ $101.22
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric VW3L40300 ILX module 3X I/O M8 sockets for 3E/A signals
Accessories for the integrated drives Lexium ILA, ILE and ILS. Set with 2 slots for integrated drives with industrial connector. One slot with 3x M8 socket in 3-pin version for I/O signals. Another ... Lieske Part No.: 609422 Mfg Part No: VW3L40300 |
146,63 EUR 152,54 EUR
≈ £122.29 | ≈ $163.79
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric VW3L5T000 ILX connector set Modbus TCP
Accessories for integrated drives Lexium ILA, ILE and ILS. Connector set for wiring fieldbus cables for Powerlink. Version: 1x M12 socket, 4-pin, D-coded. Lieske Part No.: 609451 Mfg Part No: VW3L5T000 |
58,88 EUR 61,26 EUR
≈ £49.11 | ≈ $65.77
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric VW3L50300 ILX connector set 3xI/O
Accessories for integrated drives ILA, ILE, ILS and LXM32i. Industrial connector set for logical inputs and outputs in M8 3-pin version. The set contains 3 pieces. Lieske Part No.: 609468 Mfg Part No: VW3L50300 |
87,63 EUR 91,16 EUR
≈ £73.08 | ≈ $97.88
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric GBY060040K right-angle gearbox WPLE060 I=40
In many cases, axis control requires the use of a planetary gearbox to adjust speeds and torques while maintaining the precision required by the application. To meet these requirements, Schneider ... Lieske Part No.: 664316 Mfg Part No: GBY060040K |
908,29 EUR 947,78 EUR
≈ £757.51 | ≈ $1,014.56
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric GBX060015K gear unit PLE060 I=15
In many cases, axis control requires the use of a planetary gearbox to adjust speeds and torques while maintaining the precision required by the application. To meet these requirements, Schneider ... Lieske Part No.: 707907 Mfg Part No: GBX060015K |
470,41 EUR 490,86 EUR
≈ £392.32 | ≈ $525.45
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric GBX040005K gear PLE040 I=5
In vielen Fällen erfordert die Achssteuerung den Einsatz eines Planetengetriebeszur Anpassung von Drehzahlen und Drehmomenten, wobei gleichzeitig die von derAnwendung geforderte Präzision ... Lieske Part No.: 822285 Mfg Part No: GBX040005K |
306,64 EUR 319,97 EUR
≈ £255.74 | ≈ $342.52
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric VW3L40420 insert 4 M8 sockets for 2 I/O signals and 2 M8 plugs
Zubehör für die integrierten Antriebe Lexium ILA, ILE und ILS. Set mit 2 Einschüben für integrierte Antriebe mit Industriestecker. Zwei Einschub, die jeweils mit 2x M8-Buchse in 3poliger ... Lieske Part No.: 938892 Mfg Part No: VW3L40420 |
310,50 EUR 313,61 EUR
≈ £258.96 | ≈ $346.83
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric VW3L10222 cable entry D5–9 mm IP54 2×M16
Zubehör für die integrierten Antriebe Lexium ILA, ILE und ILS. Set mit Kabeldurchführung und Einschub zur Abdichtung konform Schutzart IP54. Es beinhaltet 1 Einschub zur Abdichtung und 1 Einschub ... Lieske Part No.: 939487 Mfg Part No: VW3L10222 |
114,89 EUR 119,52 EUR
≈ £95.82 | ≈ $128.33
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric VW3L40020 insert 1 M8 socket 4-pin for 2 signals of STO
Zubehör für die integrierten Antriebe Lexium ILA, ILE und ILS. Set mit 2 Einschüben für integrierte Antriebe mit Industriestecker. Ein Einschub mit 1x M8-Buchse und 1x M8-Stecker jeweils in ... Lieske Part No.: 939568 Mfg Part No: VW3L40020 |
171,93 EUR 178,86 EUR
≈ £143.39 | ≈ $192.05
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric VW3L30010R30 Lexium integrated drive cable 3 m for Safe Torque Off
Zubehör für die integrierten Antriebe Lexium ILA, ILE und ILS. Vorkonfektionierter Kabelsatz zum Anschluss der Sicherheitsfunktion STO für integrierte Antriebe mit Industriestecker. Auf der Seite ... Lieske Part No.: 939584 Mfg Part No: VW3L30010R30 |
104,88 EUR 109,11 EUR
≈ £87.47 | ≈ $117.15
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric VW3L10000N10 seal for IP54 protection
Zubehör für die integrierten Antriebe Lexium ILA, ILE und ILS. Einsatz zur Abdichung konform Schutzart IP54. Pro Antrieb sind 2 Einsätze erforderlich. Verpackungseinheit sind 10 Stück. Lieske Part No.: 939666 Mfg Part No: VW3L10000N10 |
135,70 EUR 141,17 EUR
≈ £113.17 | ≈ $151.58
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric GBX060020K gear unit PLE060 I=20
In many cases, axis control requires the use of a planetary gearbox to adjust speeds and torques while maintaining the precision required by the application. To meet these requirements, Schneider ... Lieske Part No.: 940358 Mfg Part No: GBX060020K |
469,25 EUR 489,65 EUR
≈ £391.35 | ≈ $524.15
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric GBY060020K right-angle gear unit spur gear D60 mm gear ratio 20:1
In many cases, axis control requires the use of a planetary gearbox to adjust speeds and torques while maintaining the precision required by the application. To meet these requirements, Schneider ... Lieske Part No.: 1565610 Mfg Part No: GBY060020K |
908,29 EUR 947,78 EUR
≈ £757.51 | ≈ $1,014.56
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric GBX060009K gear straight gearing D60 mm reduction 9:1
In many cases, axis control requires the use of a planetary gearbox to adjust speeds and torques while maintaining the precision required by the application. To meet these requirements, Schneider ... Lieske Part No.: 1768321 Mfg Part No: GBX060009K |
470,41 EUR 490,86 EUR
≈ £392.32 | ≈ $525.45
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric GBY060012K right-angle gear drive straight gearing D60 mm reduction ratio 12:1
In many cases, axis control requires the use of a planetary gearbox to adjust speeds and torques while maintaining the precision required by the application. To meet these requirements, Schneider ... Lieske Part No.: 1768329 Mfg Part No: GBY060012K |
908,29 EUR 947,78 EUR
≈ £757.51 | ≈ $1,014.56
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric VW3L1T001N01 ILA/E/S industrial plug cap Ethernet 1 position
Accessory for the Lexium ILA, ILE and ILS integrated drives. Cover for connecting the power supply and the Modbus TCP communication bus. Lieske Part No.: 1769088 Mfg Part No: VW3L1T001N01 |
182,28 EUR 189,62 EUR
≈ £152.02 | ≈ $203.61
Made to order · Delivery time approx. 20 workdaysinfo_outline
|