Schneider Electric BMXSAI0410 M580S 4AI 0-20mA isolated, FAST SIL3 CAT, 2/PLD content_copy

This analog safety input module is part of the Modicon X80 range, a range of common input/output and communication modules, power supplies and racks for Modicon M340 and Modicon M580. This product consists of 4 isolated input channels. This safety module can be used in harsher environments and operate in an extended temperature range of -25°C to +60°C and requires the Modicon M580 Safety processor. Modicon X80 modules provide a unified environment for the use of I/O modules in automation architectures by reducing spare parts inventory, maintenance and training costs. Connection is made via a removable 20-pin terminal block. This product has an IP20 protection class and offers an MTBF of 463,104 hours. This module is certified by TÜV Rheinland up to SIL2/SIL3 according to IEC 61508/61511 for processes. It has been certified up to SILCL3 according to IEC 62061 and up to Cat. 4/Ple according to ISO 13849 for machinery and up to SIL4 according to EN 50126/502128/50129 for rail. This product is certified by CE, UL, CSA, RCM, EAC, UKCA and Merchant Navy and complies with EN 61000-6-5, EN 61850-3 and EN 61131-2. This module is compatible with Safety PLCs with a 20-pin cage, screw terminal or removable spring terminal block. The height of the I/O module is greater than the height of a standard rack (Ethernet or X-Bus) and should be taken into account before installing the rack. The product must be installed in the module carrier and secured with 2 screws.

Complementary
Analog/digital conversion	16 bits
Analogue input resolution	13 bits; 0...12500 counts
Permitted overload on inputs	25 mA 4...20 mA
Input impedance	286 Ohm
Precision of internal conversion resistor	0.1 % - 15 ppm/°C
Type of filter	Second order digital filtering
Nominal read cycle time	6 ms for 4 channels
Temperature drift	30 ppm/°C 4...20 mA
Recalibration	Internal
Minimum crosstalk attenuation	120 dB
Digital value format	+/- 32000 in user scale; +/- 10000 by default
Isolation voltage	500 V DC between channels; 1500 V DC between channels and ground; 1500 V DC between channels and bus
Measurement resolution	2 µA 4...20 mA
Maximum conversion value	0...25 mA 4...20 mA
MTBF reliability	463000 H
Operating altitude	0...2000 m; 2000...5000 m with derating factor
Status LED	1 LED (green) RUN; 1 LED per channel (green) channel diagnostic; 1 LED (red) ERR; 1 LED (red) I/O
Net weight	0.143 kg
Current consumption	200 mA at 3.3 V DC; 115 mA at 24 V DC
Contractual warranty
Warranty (in months)	18
Environment
Vibration resistance	3 gn
Shock resistance	15 gn
Ambient air temperature for storage	-40…85 °C
Ambient air temperature for operation	-25…60 °C
Relative humidity	5…95 % at 55 °C without condensation
IP degree of protection	IP20
Product certifications	TÜV; CSA; EAC; RCM; UL; ATEX; Merchant Navy
Standards	CSA C22.2 No 61010-2-201; IEC 61131-2; IEC 61010-2-201; UL 61010-2-201
Environmental characteristic	Gas resistant class Gx; Gas resistant class 3C4; Dust resistant class 3S4; Sand resistant class 3S4; Salt resistant level 2; Mold growth resistant class 3B2; Fungal spore resistant class 3B2; Fungal spore resistant class 3B2 conforming to IEC 60721-3-3
Logistical informations
Country of origin	FR
Main
Range of product	Modicon X80
Product or component type	Analog input module
Electrical connection	20 ways 1 connector
Isolation between channels	Isolated
Input level	High level
Analogue input number	4
Analogue input type	Current 4...20 mA
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	5.500 cm
Package 1 Width	18.000 cm
Package 1 Length	26.000 cm
Package 1 Weight	344.000 g
Unit Type of Package 2	S03
Number of Units in Package 2	8
Package 2 Height	30.000 cm
Package 2 Width	30.000 cm
Package 2 Length	40.000 cm
Package 2 Weight	3.340 kg

---