Schneider Electric BMXDDI3202KH X80 32DI 24VDC CC content_copy

This digital input module is part of the Modicon X80 range, a range of common input/output and communication modules, power supplies and module carriers for Modicon M340 and Modicon M580. This product consists of 32 input channels and is powered by 24 V DC (positive). This rugged product can be used in harsher environments and in an extended temperature range of -25°C to +70°C/-13°F to 158°F. Modicon X80 modules provide a unified environment for the use of I/O modules in automation architectures by reducing spare parts inventory, maintenance and training costs. This product is IP20 rated and offers an MTBF of 904,985 hours. This product meets the needs of our customers in the Smart Infrastructure, Water & Wastewater, Consumer Packaged Goods, Mining, Minerals, Metals, Data Center and Power Generation industries. This product is certified by CE, UL, CSA, RCM, EAC, UKCA and Merchant Navy and complies with EN 61000-6-5, EN 61850-3 and EN 61131-2 Type 1 standards. This module is compatible with Modicon M340, M580 (Local or Remote I/O) PLCs with a 40-pin connector. The product must be installed in the module carrier and secured with 2 screws.

Complementary
Input wiring mode	2 or 3 wires
Discrete input current	2.5 mA at 24 V DC
Voltage state 0 guaranteed	< 5 V
Current state 1 guaranteed	>= 2 mA
Input impedance	9600 Ohm
Input protection type	Reverse polarity protection
Insulation resistance	> 10 MOhm 500 V DC
DC typical response time	4 ms
DC maximum response time	7 ms
Sensor power supply	: 19…30 V
Typical current consumption	121 mA DC
Current consumption	160 mA at 3.3 V DC
Power dissipation in W	3.9 W
Isolation between channels and bus	1500 V for 1 minute
MTBF reliability	905000 H
Voltage detection threshold	< 14 V DC sensor fault; > 18 V DC sensor OK
Local signalling	1 LED (green) for module operating (RUN); 1 LED per channel (green) for channel diagnostic; 1 LED (red) for module error (ERR); 1 LED (red) for module I/O
Height	134.6 mm
Width	32 mm
Depth	86 mm
Net weight	0.112 kg
Paralleling of inputs
Contractual warranty
Warranty (in months)	18
Environment
IP degree of protection	IP20
Protective treatment	Conformal coating
Marking	CE; UKCA; CULus; RCM; EAC
Product certifications	ATEX zone 2; IECEx zone 2; CCC Ex zone 2 (pending); CULus HazLoc
Standards	IEC 61131-2
Directives	2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility
Dielectric strength	1500 V AC at 50/60 Hz 1 minute, primary/secondary; 500 V DC 1 minute, between group of channels
Ambient air temperature for operation	-25…70 °C
Relative humidity	5…95 % at -25…70 °C without condensation
Operating altitude	0...2000 m; 2000...5000 m with derating
Environmental characteristic	Gas resistant class Gx; Gas resistant class 3C4; Dust resistant class 3S4; Sand resistant class 3S4; Salt resistant level 2; Mold growth resistant class 3B2; Fungal spore resistant class 3B2
Logistical informations
Country of origin	FR
Main
Range of product	Modicon X80
Product or component type	Discrete input module
Device application	Industrial application in severe environment
Discrete input number	32
Discrete input voltage	24 V DC for isolated
Discrete input logic	Positive logic (sink)
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	5.500 cm
Package 1 Width	11.000 cm
Package 1 Length	11.800 cm
Package 1 Weight	152.000 g
Unit Type of Package 2	S02
Number of Units in Package 2	15
Package 2 Height	15.000 cm
Package 2 Width	30.000 cm
Package 2 Length	40.000 cm
Package 2 Weight	2.605 kg

---